Abstract:Due to their advantages of high rupture strength and long service life, polymer fibers are often used for soil improvement. However, there is no consensus on how the mixing of discrete polymer fibers affects the stress-strain relationship of clays. In this study, a constitutive relationship of polymer fiber-reinforced clay was established on the basis of the stress-strain relationship between clay and polymer fibers. The elastic-plastic unified hardening (UH) model was employed, and the fiber contribution was introduced based on the UH model. The constitutive relationship of polymer fiber-reinforced clay considers the anisotropic distribution of the discrete fiber orientation and the relative sliding between the fibers and clay matrix. The model was verified by referring to the results of consolidated undrained (CU) and consolidated drained tests of typical polymer fiber-reinforced clays in previous studies. A series of CU tests on rubber fiber-reinforced clay were conducted to validate the model further. The ratio of the simulated results to the experimental results gradually approached 1 with increasing axial strain. The constitutive relationship of polymer fiber-reinforced clay could provide satisfactory results. Polymer fiber mixing increases soil strength and enhances the properties of problematic soils, which makes the problematic soils more valuable for engineering applications. Studies have shown that the fibers in the soil tend to be distributed horizontally after the compaction process. With the anisotropic distribution of fiber orientation considered, the authors established a numerical calculation method for the stress-strain relationship of polymer fiber-reinforced clay. A major objective of this work was to allow the use of computerized numerical analysis methods when performing mechanical analyses of polymer fiber-reinforced clay, which avoids the need to conduct a large number of shear tests. In this study, a series of consolidated undrained tests of rubber fiber-reinforced expansive clay were conducted. With the data collected, the numerical calculation method for the stress-strain relationship of polymer fiber-reinforced clay was verified, and the numerical results agreed with the test results better.

Relationships among plasticity, clay fraction and activity of clay–sand mixtures

Experimental Study on Shear Strength Considering Initial Void Ratio and Plasticity Index

Estimation of consistency limits of fine-grained soils via regression analysis: A special case for high and very high plastic clayey soils in Istanbul

Effect of fines content and plasticity on undrained shear strength of quartz-clay mixtures

Influence of clay mineralogy on undrained cyclic strength of sand with fines

The unique relationship between swell percent and swell pressure of compacted clays

Hydraulic Conductivity of Reconstituted Clays Based on Intrinsic Compression

Estimating Liquid Limits of Mixed Soils

Experimental Study on Static and Dynamic Characteristics of Sand–Clay Mixtures with Different Mass Ratios

Determining Liquid Limit and Plastic Limit of Clay Soils by Electrical Surface Conduction and Diffuse Double Layer Thickness

Pressure Loading Histories and Clay Fraction Effects on the Static and Dynamic Elastic Properties of Sand-Clay Synthetic Sediments

Reexamination of effect of plasticity on liquefaction resistance of low-plasticity fine-grained soils and its potential application

Sand Fraction Effect on Hydro-Mechanical Behavior of Sand-Clay Mixture

Elastic–Plastic Constitutive Relationship of Polymer Fiber–Reinforced Clay Considering the Effect of Anisotropic Distribution

Revisiting Relationships among Specific Surface Area, Soil Consistency Limits, and Group Index of Clays

Shear strength and pore-water pressure characteristics of sandy soil mixed with plastic fine

Effect of Composition on Engineering Behavior of Clay Tills

Experimental Investigation of the Mechanical Properties of Polypropylene Fiber-Reinforced Clay Soil and Development of Predictive Models: Effects of Fiber Length and Fiber Content

Thermally induced volume change behavior of sand–clay mixtures

Main parameters influencing the plastic behavior of clays used for traditional ceramics production

Intrinsic Compression Behavior of Remolded Sand-Clay Mixture