Abstract:Technical advances in hydraulic fracturing and horizontal drilling technologies enable shale to be commercially exploited. Due to the technical and economic limitations of well testing in shale gas plays, rate transient analysis has become a more attractive option. After hydraulic fracturing, flow mechanisms in multiple scaled pores of shale become extraordinarily complicated: adsorption in nanopores, diffusion in micropores, and non-Darcy flow in macropores. Moreover, shale gas reservoirs are stress-sensitive because of ultralow permeability and diffusivity in a matrix. Furthermore, the porosity and permeability of natural fractures are stress-dependent as well. Accounting for all of these complex flow mechanisms, especially the aforementioned stress-sensitive parameters, a semianalytical production solution of a multiple fractured horizontal well (MFHW) can rapidly predict the entire production behavior. Scholars have done much work on the complex flow mechanisms of shale. Most models regarded permeability as a stress-sensitive parameter while diffusivity and porosity were considered to be a constant. However, diffusivity and porosity were proved to be stress-sensitive as experimental science developed. In this study, we present a novel semianalytical model for rate transient analysis of MFHW, which simultaneously incorporates multiple stress-sensitive parameters into flow mechanisms. Substituting stress-dependent parameters (diffusivity, porosity, and permeability) into governing equations resulted in strong nonlinearities, which was solved by employing the perturbation method. Production behaviors with only stress-sensitive permeability were compared with multiple stress-dependent parameters. The new model with multiple stress-sensitive parameters declined slower than the permeability-sensitive model, and the new model matched better with the field data. In addition, the effects of major stress-sensitive parameters on production decline curves were analyzed by the proposed model. The sensitivity analysis indicated that different parameters had their own degree of sensitivity intensity and influence on the production period. Finally, 1001 wells from the Marcellus shale play were divided into three well groups. Estimated inversion values of reservoir parameters from the three well groups and relevant single wells were consistent with the field data. The inverted values of single wells fluctuate within the inversion values of well groups, which indicates that the production behavior of well groups could be a guide for rate transient analysis of a single well in shale gas reservoirs.This article has not yet been cited by other publications.

Pressure transient analysis of multi-fractured horizontal wells in tight oil reservoirs with consideration of stress sensitivity

Transient Pressure Analysis of Volume-Fractured Horizontal Wells Considering Complex Fracture Networks and Stress Sensitivity in Tight Reservoirs

Novel Mathematical Model for Transient Pressure Analysis of Multifractured Horizontal Wells in Naturally Fractured Oil Reservoirs

Transient Pressure Performance Analysis of Hydraulically Fractured Horizontal Well in Tight Oil Reservoir

A semi-analytical model for coupled flow in stress-sensitive multi-scale shale reservoirs with fractal characteristics

Novel Model for Rate Transient Analysis in Stress-Sensitive Shale Gas Reservoirs

A semi-analytical pressure model of horizontal well with complex networks in heterogeneous reservoirs

Performance of multistage-fractured horizontal wells with secondary discrete fractures in heterogeneous tight reservoirs

Numerical Simulation of a Horizontal Well With Multi-Stage Oval Hydraulic Fractures in Tight Oil Reservoir Based on an Embedded Discrete Fracture Model

MULTISCALE AND MULTIPHASE MODELING OF FLOW BEHAVIOR IN DISCRETE FRACTURE NETWORKS FOR TIGHT OIL RESERVOIRS

An advanced fractal-based well testing model capturing fracture complexity in low permeability tight gas reservoirs

Pressure transient analysis of a vertical well with multiple etched fractures in carbonate reservoirs

Integrated workflow of temperature transient analysis and pressure transient analysis for multistage fractured horizontal wells in tight oil reservoirs

Development of coupled fluid-flow/geomechanics model considering storage and transport mechanism in shale gas reservoirs with complex fracture morphology

Analysis of the transient pressure of fractured wells coupling with irregular flow fracture: Semi-analytical model and case study

Model and Analysis of Pump-Stopping Pressure Drop with Consideration of Hydraulic Fracture Network in Tight Oil Reservoirs

Semi-Analytical Model Based on the Volumetric Source Method to Production Simulation from Nonplanar Fracture Geometry in Tight Oil Reservoirs

A semianalytical model of fractured horizontal well with hydraulic fracture network in shale gas reservoir for pressure transient analysis

Transient Interporosity Flow in Shale/Tight Oil Reservoirs: Model and Application

Modeling and analysis for coupled multi-zone flow of frac hits in shale reservoirs

An Analytical Method for Determining the Bottom‐Hole Pressure of Vertical Well With Multiple Fractures