Abstract:Abstract Sensors of any kind contribute to extra space and electronics when they are used in any application. Besides, the sensor noise also has the effect of altering the overall gain of the system. This is more prevalent in non-linear systems like motor control. In applications which have strict space constraints like Electric vehicles, the use of sensors must be optimized, which, in turn, gave rise to many sensorless state estimation strategies. This paper proposes a novel sensorless control technique for brushless direct current (BLDC) motor used in electric vehicle applications. The concept of sensorless control in BLDC Motor drive eliminates the hall-effect position sensor, thereby giving better performance and improves the robustness of the overall drive system. The main objective of this work is to estimate the position of the motor at standstill condition using stator saturation effect concerning the rotor, accelerate the motor from standstill so that enough back EMF is generated. This acceleration technique speeds up the motor to a stage where a self-actuating control mechanism is used to generate control signals with back EMF or line voltages. The motor can be started with a load, which is a significant constraint for electric vehicle application. The proposed method will avoid the reverse rotation of the motor. The proposed work is simulated in Matlab/Simulink software, and results obtained show that it works well under dynamic conditions of starting, acceleration and load switching. The hardware setup of the proposed work is developed using the TMS320F2812 DSP processor. Simulation and experimental results validate the effectiveness of the proposed work for electric vehicle application.

A DC/DC Buck-Boost Converter–Inverter–DC Motor System: Sensorless Passivity-Based Control

Stabilization Of Dc-Dc Buck Power Converter Feeding A Mixed Load Using Passivity-Based Control With Nonlinear Disturbance Observer

Sliding Mode and PI-Based Control for the SISO "Full-Bridge Buck Inverter–DC Motor" System Powered by Renewable Energy

Adaptive Passivity-Based Control of Dc–dc Buck Power Converter with Constant Power Load in DC Microgrid Systems

Backstepping Control of Speed for Sensorless Permanent Magnet Synchronous Motor

Path-Tracking of a WMR Fed by Inverter-DC/DC Buck Power Electronic Converter Systems

Dynamic Sensorless Control Approach for Markovian Switching Systems Applied to PWM DC–DC Converters with Time-Delay and Partial Input Saturation

Realization of the Sensorless Permanent Magnet Synchronous Motor Drive Control System with an Intelligent Controller

Validation of Passivity-Based Control and Array PID in High-Power Quadratic Buck Converter Through Rapid Prototyping

Research on Sensorless DTC Systems Based on Variable Structure Control

Study of Speed Sensorless Control Methodology for Single Inverter Parallel Connected Dual Induction Motors Based on the Dynamic Model

Design of passivity-based control system for induction motors

An Adaptive Passivity-Based Controller of a Buck-Boost Converter With a Constant Power Load

DC-link current based position estimation and speed sensorless control of a BLDC motor used for electric vehicle applications

Application of passivity-based and sliding mode control of permanent magnet synchronous motor under controlled voltage

Voltage regulation in buck--boost coniverters feeding an unknown constant power load: an adaptive passivity-based control

Adaptive Nonlinear Control of High-Performance motors through Multi-Level Inverters

Enhancement of DC‐bus Voltage Regulation in Cascaded Converter System by a New Sensorless Load Current Feedforward Control Scheme

Sensorless Control for DC–DC Boost Converter via Generalized Parameter Estimation-Based Observer

Passivity-Based Control of Buck-Boost Converter for Different Loads Research

An Integrated Power Converter-Based Brushless DC Motor Drive System