Abstract:Crumb rubber modified asphalt (CRMA) is widely used in road construction due to its excellent performance. However, it generates significant odorous gases during paving. To analyze the odor contribution, both untreated crumb rubber and desulfurized rubber were involved in this study to prepare CRMA and desulfurized rubber modified asphalt (DRMA). Attapulgite was selected as an emission reduction agent to reduce the odorous emissions released from CRMA and DRMA. An indoor fume collection system and gas chromatography-mass spectrometry (GC-MS) analysis were used to trace the odor source and quantify the odorous emissions. A comprehensive olfactory thresholds database for CRMA emissions was further established to evaluate the odor level of various rubberized asphalt binders by using three-point comparative odor bag method, along with known olfactory thresholds of certain compounds reported in the literature. Dynamic shear rheometer (DSR), multiple stress creep recovery (MSCR), bending beam rheometer (BBR) and Brookfield viscosity tests were used to analyze the effect of attapulgite on rheological properties of CRMA and DRMA. Results indicated that odor emission rate of CRMA containing 1 %, 3 %, and 5 % attapulgite was decreased by 42.62 %, 63.29 %, and 71.06 %, respectively. Benzothiazole, derived from tire rubber vulcanization accelerator, can be reduced by 60.25 % with 1 % attapulgite, demonstrating excellent performance in terms of reducing target odor emissions. Although DRMA has a lower emission rate than that of conventional CRMA, the addition of 1 % attapulgite can further reduce the odor emission rate of DRMA by 37.92 %. The addition of attapulgite has less impact on the overall performance of CRMA and DRMA. Besides, it was found that attapulgite can reduce the viscosity of rubberized asphalt binders, which is beneficial for rubberized asphalt mixture paving and compaction. Considering odor reduction, performance, and economic factors, the optimal attapulgite content was determined to be 5 % for CRMA and 1 % for DRMA. This approach successfully reduces odorous emissions while maintaining the desirable properties of CRMA, making it a viable solution for environmentally friendly road construction.

Emission behavior of crumb rubber modified asphalt in the production process

Effect of Crumb Rubber Size on the Performance of Rubberized Asphalt with Bio-Oil Pretreatment

Emission Analysis of Recycled Tire Rubber Modified Asphalt in Hot and Warm Mix Conditions

Rheological and environmental characteristics of crumb rubber asphalt binders containing non-foaming warm mix asphalt additives

Tracing the Odor Source of Crumb Rubber Modified Asphalt Emissions and Evaluating the Deodorization Effect of Attapulgite

Effects of waterborne polyurethane on storage stability, rheological properties, and VOCs emission of crumb rubber modified asphalt

Emission Risk and Inhibition Technology of Asphalt Fume from Crumb Rubber Modified Asphalt

Emissions of Particulate Matters, Volatile Organic Compounds and Polycyclic Aromatic Hydrocarbons from Warm and Hot Asphalt Mixes

Chemical and Rheological Investigation of High-Cured Crumb Rubber-Modified Asphalt

Property Characterization of Asphalt Binders and Mixtures Modified by Different Crumb Rubbers

Investigation on Rheological Characteristics of Low-Emissions Crumb Rubber Modified Asphalt

Microbial Treatment of Waste Crumb Rubber: Reducing Energy Consumption and Harmful Emissions During Asphalt Production Process

Characterization of emissions from rubber modified asphalt and their impact on environmental burden: Insights into composition variability and hazard assessment

Preparation and Investigation on Terminal Blend Asphalt Binders with High Content of Activated Crumb Rubber

Effect of Sodium Hypochlorite-Activated Crumb Rubber on Rheological Properties of Rubber-Modified Asphalt

Study on the Properties of Waste Oil-Activated Crumb Rubber-Modified Asphalt Based on Molecular Dynamics Simulation and Rheology

The Effects of Activation Treatments for Crumb Rubber on the Compatibility and Mechanical Performance of Modified Asphalt Binder and Mixture by the Dry Method

Mechanisms associated with sulfidation gas release, desulphurisation and degradation of rubber powder in crumb rubber modified asphalt

Analysis on the Rheological Behavior, Microstructure and Storage Stability Between Crumb Rubber of Desulfurization and Depolymerization and Asphalt

Compositional analysis and quantitative evaluation of organic emissions from asphalt materials: Improvements and refinements

Experimental Study of Stable Crumb Rubber Asphalt and Asphalt Mixture