Abstract:In order to optimize the mix ratio design of magnesium phosphate cementitious composites (MPCC) to obtain excellent workability and strength, this study investigated the effects of MgO-phosphate ratio, water-binder ratio, aggregate-binder ratio, the mass ratio of coarse and fine aggregates, mineral admixture content and steel fiber content on the flowability, setting time and cubic compressive strength (CCS) of MPCC using orthogonal design of experiments with a total of 32 sets of mix ratios. The experimental results were also analyzed utilizing range and variance analysis to determine the main influencing parameters and the optimal dosage of each factor, and the optimal MPCC mix ratio was obtained. In addition, the prediction of CCS for MPCC using five machine learning models was first introduced, and the predicted results were interpreted and analyzed regarding the SHAP (Shapley Additive exPlanations) features importance. The results showed that the effect of steel fiber volume content and water-binder ratio on the flowability was significant, and M/P significantly affected the setting time of MPCC. The CCS of MPCC increased with the age of curing, and MPCC exhibited high early strength, with 1-day CCS accounting for 55%~85% of the 28-day CCS. The effect of M/P on the 1-day, 3-day and 28-day CCS was highly significant, with M/P contribution rate as high as 76.3%, 80.3% and 83.6% of the CCS at 1, 3 and 28 days, respectively. Besides, the effect of steel fiber volume content on 28-day CCS was also significant. In summary, the optimal mix ratio of MPCC was A4B1C4D1E4F4G1 (M/P = 3, w/b=0.11, a/b=1.4, c/f=3, FA content =15%, MK content= 15%, steel fiber volume content= 0%). Furthermore, random forest (RF) and particle swarm optimization of back propagation artificial neural network (PSO-BP-ANN) models have a higher prediction accuracy, and the results of SHAP feature significance further confirmed the above test results.

Orthogonal test design for optimization of synthesis of super early strength anchoring material

Optimization of Formula for Stabilizing Muddy Soil Using Response Surface Methodology

Experimental Research On Solidification Of Ningbo Soil With Its Different Initial Status

Orthogonal Experiment Design and Analysis of Compound Activator

Strength Analysis and Optimization of Alkali Activated Slag Backfills Through Response Surface Methodology

Optimal Design and Performance of Concrete with Function Component in Marine Environment

Optimization design and microstructure analysis of ultra-high performance cement-based composites

Optimum design of the quaternary composite binder considering strength, cost, and electrical resistivity

Development of a Novel Double-Sulfate Composite Early Strength Agent to Improve the Hydration Hardening Properties of Portland Cement Paste

The influence and mechanism analysis of aluminum sulfate as an environmentally friendly early strength agent on the properties of cement-based materials

Proportion and Performance Optimization of Lightweight Foamed Phosphogypsum Material Based on an Orthogonal Experiment

Optimization design and mechanical properties of multi-component ecological gelling materials

A ternary optimization of alkali-activated cement mortars incorporating glass powder, slag and calcium aluminate cement

Mix proportion optimization and early strength development in modified foam concrete: an experimental study

Data-driven inverse mix design for sustainable alkali-activated materials

Effect of mixing method on the performance of alkali-activated fly ash/slag pastes along with polycarboxylate admixture

Optimization of Mix Proportion and Strength Prediction of Magnesium Phosphate Cement-Based Composites Based on Machine Learning

Enhancing Sulfate Erosion Resistance in Ultra-High-Performance Concrete through Mix Design Optimization Using the Modified Andreasen and Andersen Method

Analysis of Influencing Factors of Cementitious Material Properties of Lead–Zinc Tailings Based on Orthogonal Tests

Optimization of Ultra-High Performance Concrete Based on Response Surface Methodology and NSGA-II