Abstract:As a hydrophilic renewable polymer, starch has been widely used in biocompatible plastics as a filler for more than two decades. The present study aimed at investigating the effects of polyethylene glycol (PEG), as a plasticizer, on the physicochemical properties of a hybrid composite-polylactic acid (PLA) and thermoplastic starch (TPS). A solvent evaporation process was adopted to gelatinize the starch and disparate PEG contents ranging from 3 to 15 wt.% (with respect to the sample weight) were examined. It was revealed that the increase in the PEG content was accompanied by an increment in the starch gelatinization degree. Referring to the microstructural analyses, the TPS/PLA mixture yielded a ductile hybrid composite with a fine morphology and a uniform phase. Nevertheless, two different solvents, including acetone and ethanol, were used to assess if they had any effect on the hybrid's morphology, tensile strength and thermal properties. It was found that ethanol culminated in a porous hybrid composite with a finer morphology and better starch distribution in the PLA structure than acetone. As the result of PEG addition to the composite, the crystallinity and tensile strength were decreased, whereas the elongation increased. The hydrolytic degradation of samples was assessed under different pH and thermal conditions. Moreover, the microbial degradation of the PLA/TPS hybrid composite containing different PEG molar fractions was investigated in the soil for 45 days. The rate of degradation in both hydrolytic and biodegradation increased in the samples with a higher amount of PEG with ethanol solvent.

Effect of Plasticizer Content on Mechanical and Water Vapor Permeability of Maize Starch/PVOH/Chitosan Composite Films

Influence of Plasticizers Concentration on Thermal, Mechanical, and Physicochemical Properties on Starch Films

Effects of PVA and yerba mate extract on extruded films of carboxymethyl cassava starch/PVA blends for antioxidant and mechanically resistant food packaging

Effect of Glycerol on Water Vapor Sorption and Mechanical Properties of Starch/Clay Composite Films

Functional properties and characterization of maize starch films blended with chitosan

Physical, thermal, morphological, and tensile properties of cornstarch-based films as affected by different plasticizers

Effect of plasticizer types on the properties of starch/polylactic acid composites

Effects of environment-friendly plasticizers on properties of starch-based nanocomposite films

Effect of Plasticizers on the Properties of Potato Flour Films

Effect of Different Plasticizers on Mechanical Stability of Soybean Protein Packaging Films

Structural, Physicochemical and Biodegradable Properties of Composite Plastics Prepared with Polyvinyl Alcohol (PVA), OSA Potato Starch and Gliadin

Water Absorption and Thermomechanical Characterization of Extruded Starch/Poly(lactic acid)/Agave Bagasse Fiber Bioplastic Composites

The Effect of Poly (Ethylene glycol) Emulation on the Degradation of PLA/Starch Composites

Corn Starch (Zea mays) Biopolymer Plastic Reaction in Combination with Sorbitol and Glycerol

Biobased ternary composites for food packaging: influence of natural plasticizers and starch on polylactic acid performance

Effect of Plasticizers on Mechanical and Barrier Properties of Rice Starch Film

Physical, barrier, and thermal properties characterization of edible films from composite mixtures of starch and starch derivatives

Effect of Sodium Citrate/polyethylene Glycol on Plasticization and Retrogradation of Maize Starch.

Effect of Type of Plasticizers on Mechanical and Water Barrier Properties of Transglutaminase Cross-Linked Zein–Oleic Acid Composite Films

Evaluation of the Antimicrobial, Thermal, Mechanical, and Barrier Properties of Corn Starch–Chitosan Biodegradable Films Reinforced with Cellulose Nanocrystals

Study of the Plasticization Effect of 1-Ethyl-3-methylimidazolium Acetate in TPS/PVA Biodegradable Blends Produced by Melt-Mixing