Abstract:Multispectral airborne Light Detection And Ranging (LiDAR) systems are currently available. Optech Titan is an example of these systems, which acquires LiDAR point clouds at three independent wavelengths (1550, 1064 and 532 nm) from Earth’s surface. This dissertation aims to use the radiometric information (i.e., intensity) of the Optech Titan LiDAR data along with the geometric information (e.g., height) for land/water discrimination in coastal zones and land cover classification of urban areas. A set of point features based on elevation, intensity, and geometry was extracted and evaluated for land/water discrimination in coastal zones. In addition, an automated land/water discrimination approach based on seeded region growing algorithm was presented. Two data subsets were tested at Lake Ontario and Tobermory Harbour in Ontario, Canada. The elevation and geometry-based features achieved average overall accuracies of 72.8% - 83.3% and 69.9% -74.4%, respectively, while the intensity-based features achieved an average overall accuracy of 59.0% - 63.4%. The region growing method achieved an average overall accuracy of more than 99%, and the automation of this method is restricted by having double returns from water bodies at the 532 nm wavelength. A hierarchal point-based classification approach was presented for land cover classification of urban areas. The collected point clouds at the three wavelengths were first merged and three intensity values were estimated for each LiDAR point, followed by three-level classification approach. First, a ground filtering method was applied to separate non-ground from ground points. Second, three normalized difference vegetation indices (NDVIs) were computed, followed by NDVIs’ histograms construction. A multivariate Gaussian decomposition (MVGD) was then used to divide those histograms into buildings or trees from non-ground and roads or grass from ground points. Third, classes such as power lines, swimming pools and different types of trees were labeled based on their spectral characteristics. Three data subsets were tested representing different complexity of urban areas in Oshawa, Ontario, Canada. It is shown that the presented approach has achieved an overall accuracy up to 93.0%, which increased to more than 99% by considering the spatial coherence of the LiDAR point clouds.

Technical challenges of airborne LiDAR surveying technology in Malaysia

National Earth Observation Program for Digital Earth - the Malaysian Case: Issues in Consideration

Perceived Usefulness of Airborne LiDAR Technology in Road Design and Management: A Review

Efficiency of Terrestrial Laser Scanning in Survey Works: Assessment, Modelling, and Monitoring

Some critical issues on airborne LIDAR mapping software in coastal survey

Multispectral Light Detection and Ranging Technology and Applications: A Review

Airborne LiDAR: state-of-the-art of system design, technology and application

Prospect of the Application of LiDAR Technology for Topographical Mapping in China

RESEARCH AND APPLICATION OF LIDAR TECHNOLOGY IN CADASTRAL SURVEYING AND MAPPING

Urban land cover classification using airborne LiDAR data: A review

Application of Modern Technology of LIDAR in Checking Verticality of Piles

Geodetic imaging with airborne LiDAR: the Earth's surface revealed

Review: Optimizing LiDAR Technology for Enhanced 3D Remote Sensing

Geohazard Recognition and Inventory Mapping Using Airborne LiDAR Data in Complex Mountainous Areas

Review on Lidar Technology

Large scale topographic mapping based on unmanned aerial vehicle and aerial photogrammetric technique

Low-Cost LiDAR-GNSS-UAV Technology Development for PT Garam’s Three-Dimensional Stockpile Modelling Needs

Airborne LiDAR for DEM generation: some critical issues

Land/Water Discrimination And Land Cover Classification Using Multispectral Airborne Lidar Data

LiDAR data acquisition and processing for ecology applications

INS-AIDED 3D LIDAR SEAMLESS MAPPING IN CHALLENGING ENVIRONMENT FOR FUTURE HIGH DEFINITION MAP