Abstract:As a classical type of smart materials, shape memory alloys (SMAs) are of high energy density, light weight, and low actuating voltage, and therefore are of great potential to be used as actuators for robots. Major challenges in controlling an SMA-driven soft robot are the limited bandwidth and in cases with external loads. Active cooling has been demonstrated to dramatically increase its bandwidth, but external load may cause severe inaccuracy in the system modeling. Controllers that do not rely on accurate modeling of the SMA-driven soft robot is essential. In this article, we designed an elastomeric soft robotic tentacle actuated by three pieces of SMA springs with both active heating (Joule heating) and active cooling (compressed air). We proposed a multi-input-multi-output controller that directly uses the heating and cooling states of the three SMAs to control the tentacle's bending posture in three-dimensional (3-D) space. The successful implementation of the controller is attributed to a novel dual-channel control algorithm that integrates the bending motion control and swing motion control, and a state-machine controller for coordinating the three SMAs' actuations to achieve robust swing motion control. The system with such hardware and control algorithm was capable of performing bending motions with maximum actuating speed $ > $ 90 $^\circ /$ s, deactuating speed $ > $ 25 $^\circ /$ s, closed-loop motions with rapidity (6–41 $^\circ /$ s for heating, 4–19 $^\circ /$ s for cooling), accuracy (steady-state error $ < $ 0.1 $^\circ$ for no load, 0.13 $\%$ of the full range; steady-state error $ < $ 1.2 $^\circ$ with load of 1 bodyweight, 1.6 $\%$ of the full range), and load-bearing capability (dynamic load: 1 bodyweight, static load: 8.8 bodyweights). Besides, the tentacle achieved efficient motion tracking by coordinating the bending and swing motion through the controller, for both predefined trajectories and random trajectories. We demonstrated a remotely controlled 360 $^\circ$ image scanning of a room using our proposed robotic tentacle equipped with a camera at its top end to intuitively show its performances. We believe this work will advance the design and control of SMA-driven soft continuum robots for potential uses in surgery and explorations of unknown areas.

Hybrid Antagonistic System With Coiled Shape Memory Alloy and Twisted and Coiled Polymer Actuator for Lightweight Robotic Arm

Earthworm‐Inspired Multi‐Material, Adaptive Strain‐Limiting, Hybrid Actuators for Soft Robots

Soft Artificial Muscle Based on Pre-Detwinned Shape Memory Alloy Spring Actuator Achieving High Passive Assistive Torque for Wearable Robot

A Variable Stiffness Soft Robotic Manipulator Based on Antagonistic Design of Supercoiled Polymer Artificial Muscles and Shape Memory Alloys

Controllable Stiffness Origami “skeletons” for Lightweight and Multifunctional Artificial Muscles

Cooperative antagonistic mechanism driven by bidirectional pneumatic artificial muscles for soft robotic joints

Design of Shape Memory Alloy-Based Soft Wearable Robot for Assisting Wrist Motion

Soft Wearable Robot With Shape Memory Alloy (SMA)-Based Artificial Muscle for Assisting With Elbow Flexion and Forearm Supination/Pronation

Control Approach for a Novel High Power-To-Weight Ratio Actuator Scalable in Force and Length for Robots

Advanced 2-DOF Counterbalance Mechanism based on Gear Units and Springs to Minimize Required Torques of Robot Arm

Review of Soft Linear Actuator and the Design of a Dielectric Elastomer Linear Actuator

A multiple-shape memory polymer-metal composite actuator capable of programmable control, creating complex 3D motion of bending, twisting, and oscillation

A Fabrication Device Producing Twisted and Coiled Polymer Actuators for Use in Soft Robots

A Reconfigurable Soft Helical Actuator with Variable Stiffness Skeleton

Actuating compact wearable augmented reality devices by multifunctional artificial muscle

Active-Cooling-in-the-Loop Controller Design and Implementation for an SMA-Driven Soft Robotic Tentacle

A Reconfigurable Hybrid Actuator with Rigid and Soft Components

Hybrid Artificial Muscle: Enhanced Actuation and Load-Bearing Performances via Origami Metamaterial Endoskeleton

A hybrid actuation approach for human-friendly robot design

Development of a Novel SMA-Driven Compliant Rotary Actuator Based on a Double Helical Structure

Mobilizing and Antagonistic Stiffness Control for SMA Artificial Muscle Actuator Protected by Rolled Film Tube