Abstract:The lithium (Li) metal battery (LMB) is a promising high-energy-density energy storage system. However, the uncontrollable dendrite formation and low Coulombic efficiency (CE) associated with the Li metal anode have largely hindered the practical application of LMBs [1]. During recent years, extensive efforts have been made to address the main problems of Li metal anode and to improve the electrochemical performance of the related LMBs, and plenty of promising results have been achieved. Among the reported approaches, the reformulation of electrolytes with different Li salts and additives has been regarded as an easy and cost-effective method. The conventional LiPF6/carbonate electrolytes have been found to be detrimental to Li metal anode especially at high charge current densities, which is mainly due to the serious corrosion of Li metal anode, the consumption of electrolyte, the continuous formation of solid electrolyte interphase, and the increase of cell impedance. The highly concentrated electrolytes of LiTFSI or LiFSI in ethers have been reported to be effective to suppress Li dendrites growth and to improve the Li CE [2]. However, the ether-based electrolytes normally are not electrochemically stable at the voltages around or above 4 V. In our previous works, we have systematically investigated the dual-salt electrolytes of LiTFSI-LiBOB in carbonate solvent mixture and their effects on the performances of Li||LiFePO4 [3], Li||LiNi0.80Co0.15Al0.05O2 [4] battery systems. It has been found that the dual-salt electrolytes are favorable to protect Li metal anode and to improve the rate capability of the LMBs. Especially, our recent work discovered that further significant improvements in fast charging capability and long-term cycling stability of the Li||LiNi0.4Mn0.4Co0.2O2 batteries can be achieved by adding an optimal additive amount of LiPF6 to the LiTFSI-LiBOB/carbonate electrolyte [5]. Nevertheless, this electrolyte still leads to relatively low Li CE, which is about 90.6%. In order to further improve the Li CE of the dual-salt/carbonate electrolyte, we systematically investigated different additives such as VC, FEC, VEC, etc. By using certain additives the Li CE in the electrolytes of LiTFSI-LiBOB dual-salt in carbonate solvents can be improved from 90.6% to 98.1%. Moreover, the electrochemical performances of the LMBs with a 4-V Li-ion cathode using the newly developed dual-salt electrolytes were studied, and enhanced battery performances have been obtained. The promising results will be reported at the meeting.

Effect of Li salt addition on electrochemical properties of poly(ethylene carbonate)-Mg salt electrolytes

Effects of Components in Solvent-Enhanced PVDF-HFP-Based Polymer Electrolyte on Its Electrochemical Performance

Synergistic Combination of Ether-Linkage and Polymer-in-Salt for Electrolytes with Facile Li + Conducting and High Stability in Solid-State Lithium Batteries

Effect of plasticizer on the ion-conductive and dielectric behavior of poly(ethylene carbonate)-based Li electrolytes

Synergistic theoretical and experimental study on the ion dynamics of bis(trifluoromethanesulfonyl)imide-based alkali metal salts for solid polymer electrolytes

Polybenzimidazole-reinforced polyethylene oxide-based polymer-in-salt electrolytes enabling excellent structural stability and superior electrochemical performance for lithium metal batteries

Highly salt concentrated ethylene carbonate-based self-standing copolymer electrolyte for solid-state lithium metal battery

Synergistic Combination of Crosslinked Polymer and Concentrated Ionic Liquid for Electrolytes with High Stability in Solid-State Lithium Metal Batteries

Effect of salt concentration on properties of mixed carbonate-based electrolyte for Li-ion batteries: a molecular dynamics simulation study

Concentrated LiFSI–Ethylene Carbonate Electrolytes and Their Compatibility with High-Capacity and High-Voltage Electrodes

Imidazole containing solid polymer electrolyte for lithium ion conduction and the effects of two lithium salts

Salt Dissociation and Localized High-concentration Solvation by Interface of Fluorinated Gel and Polymer Solid Electrolyte

Modeling analysis of ionic solvation structure in concentrated poly(ethylene carbonate) electrolytes

Advanced High-Voltage Electrolyte Design Using Poly(ethylene oxide) and High-Concentration Ionic Liquids for All-Solid-State Lithium Metal Batteries

Manipulating the ionic conductivity and interfacial compatibility of polymer-in-dual-salt electrolytes enables extended-temperature quasi-solid metal batteries

Effect of succinonitrile on the structural, ion conductivity, and dielectric properties of PVDF‐HFP based solid polymer electrolytes

Single‐ion conducting polymer as lithium salt additive in polymerized ionic liquid block copolymer electrolyte

Electrochemical performance of plasticized PEO-LiTf complex-based composite gel polymer electrolytes with the addition of barium titanate

Cation effect on ionic liquid-involved polymer electrolyte for solid-state lithium metal batteries

Effects of lithium salts on PEO-based solid polymer electrolytes and their all-solid-state lithium-ion batteries

Effects of Additives in Dual-Salt/Carbonate Electrolytes on Performances of Lithium Metal Batteries