Abstract:Bridges are basic infrastructure that must be met to create regional connectivity in Indonesia. One type of bridge that is often used is a curved bridge, which has the advantages of high strength, attractiveness, aesthetics and economy. In order to accelerate the development of bridge infrastructure, an efficient innovation in curved bridge design is needed. The development of curved bridge structures to achieve efficient designs has received much attention in several decades. However, researchers have only focused on optimising the geometry variation of the arch height. Therefore, the aim of this research is to innovate the optimisation of the hanger spacing on the arch bridge structure. In order to obtain optimal results, a bridge model is carried out by varying the hanger spacing of the centre model with a hanger spacing ratio of (1.3 - 1.1 - 0.9 - 0.7), a flat model with a hanger spacing ratio of (1 - 1 - 1 - 1) and an edge model with a hanger spacing ratio of (0.7 - 0.9 - 1.1 - 1.3), so that from the three models, the effect of hanger location on three conditions is obtained. Each model is modelled in the SAP2000 software and given a bridge service load to obtain the internal forces and deflections that occur. The output of the internal force and deflection is then analysed to determine the effect of the location of the bridge service hanger. The serviceability of the bridge is also analysed by calculating the ratio between the weight of the bridge and the deflection that occurs. The results of the analysis show that the location of the hanger affects the performance of the arch bridge structure. The centre model bridge design produces the most efficient structural performance in resisting the compressive axial forces and moments that occur, and produces the least deflection. Meanwhile, the edge model will provide the most efficient structural performance in resisting tensile axial forces. By referring to the results of the bridge weight to deflection ratio analysis, it can be concluded that the centre model produces the most efficient structural design when compared to other curved bridge models.

How Does the Bridge Design Affect the Behavior of Pedestrian Bridge Users?: A Case Study in Pandanaran Skybridge Corridor Semarang

Design of Footbridges Against Pedestrian-Induced Vibrations

Study of the correlation between road connectivity values towards walkability on Jendral Sudirman Street, Pangkalpinang using the space syntax method

EFFECTS OF STREET FURNITURE TOWARDS THE LESSENING OF PEDESTRIAN AREA IN BRAGA STREET

Conceptual Design of the Pedestrian Bridge

Optimization of Hanger Spacing of Steel Arch Bridges Using Dynamic Loads

Analysis of pedestrian facility needs in tradisional indonesian market areas based on traffic characteristics and pedestrian volumes ( indonesian market area)

Optimization of Traffic Safety for Motorists with Raised Intersection Design at Intersection in DKI Jakarta

PEDESTRIAN PATHS UTILIZATION: SAFETY AND ATTRACTIVENESS ASPECTS (Case Study: Ir. H Juanda Raya Sidewalk, Depok, Indonesia)

An analysis for safety and environmentally friendly pedestrian characteristic and crossing facilities selection, (case study: Jalan Alternatif Cibubur)

The Accessible Design of Pedestrian Bridges

The influence of the existence of new landmark on urban spatial

The walkability concept based on pedestrian perceptions in Bandung City Square, Indonesia

Behavioural characteristics influencing walking speed of pedestrians over elevated facilities: A case study of India

Spatial Entropy Model for the Impact Assessment of Built Environment on Urban Street Design

The potential sociability of building front set back areas in commercial corridor: Searching for typologies and variables

Do footbridge and underpass improve pedestrian safety? A Hong Kong case study using three-dimensional digital map of pedestrian network

Evaluating the Friendliness of Pedestrian Footbridges Using Visibility Analysis: A Case Study in Wuhan

Visitors' perception of climate sensitive urban design in the Kota Lama Semarang, Indonesia

ALTERNATIF DESAIN STRUKTUR ATAS JEMBATAN RANGKA BAJA TIPE HALF THROUGH ARCH PADA JEMBATAN TRISULA BLITAR, JAWA TIMUR

Evaluation of Nonconformity To Pedestrian Safety Measure in Immediate Area of LRT Cawang-Dukuh Atas Construction Site