Abstract:Superhydrophobic microchannels have evolved recently as an accepted strategy to mitigate the hydrodynamic resistance tendered in micro-constrictions. In this work, hydrodynamics of a hydrophobic microchannel realized by entrapping air in the cavities located between transversely oriented ribs is numerically investigated. An interface formed between the liquid and air/vapor in the confinement facilitates a resistance free slipping surface for the flowing water. The shape of the meniscus is determined by the pressure difference between air and liquid and is classified as convex, flat, and concave depending on the protrusion angle. Several applications require a long hydrophobic channel in which the liquid pressure decreases lengthwise; consequently the interface shape changes as well. In this regard, a mathematical model is proposed to predict the protrusion angle at a specific distance from the inlet of microchannel. This is incorporated in the computational fluid dynamics (CFD) simulations to define the static geometry of the interface which is varying throughout the length of the channel. Moreover, the boundary is treated as a combination of flat no-slip and curved shear-free regions to mimic the ribs and cavities. Further, the evolution of interface morphology is captured using the volume-of-fluid (VOF) scheme by considering a static contact angle at the solid surface to check the validity of the suggested model. Dynamically evolved protrusion angle is measured for various liquid–gas interface pressures and it is observed that the theoretical scaling proposed by Laplace and Young is well obeyed. Though CFD–VOF simulation scheme is an effective tool for predicting the pressure dependent liquid–gas meniscus and concurrent hydrodynamics of the ribbed microchannel, it is resource intensive. The present study demonstrates that the developed model for static boundary may be adopted alternatively to predict the hydrodynamics of a long hydrophobic microchannel by saving computational resources.

Numerical modeling of laminar free overfall in triangular channels

Experimental and Numerical Investigation on Gravity-Driven Film Flow over Triangular Corrugations

Numerical Study of Violent Impact Flow Using a CIP-Based Model

A Study on Flow and Heat Transfer Characteristics for Saturated Falling-Film Evaporation of Liquid Oxygen in a Vertical Channel

Numerical Computations of the Flow in A Finite Diverging Channel

Direct Numerical Simulation of A High-Froude-Number Turbulent Open-Channel Flow

Effects of Structured Roughness on Fluid Flow at the Microscale Level

Modeling unsteady turbulent flows around immersed obstacles in a channel with complex geometry

A Numerical Study of Fluid Flow in a Vertical Slot Fishway with the Smoothed Particle Hydrodynamics Method

A numerical model for calculating velocity distribution in cross-section of an open channel

Numerical simulation of liquid–gas interface formation in long superhydrophobic microchannels with transverse ribs and grooves

Unsteady shallow meandering flows in rectangular reservoirs: A modal analysis of URANS modelling

Modeling the excess velocity of low-viscous Taylor droplets in square microchannels

Experimental Validation of CFD Modeling of Multiphase Flow through Open Channel Confluence

Numerical validation of analytical formulas for channel flows over liquid-infused surfaces

Modelling high-Reynolds-number effects in fully developed channel flows using a two-scale Reynolds stress model

Numerical investigation the hydrodynamic parameters of the flow in a wavy corrugated channel using different turbulence models

Direct numerical simulation of open-channel flow over a fully-rough wall at moderate relative submergence

Improved Prediction of the Flow in Cylindrical Critical Flow Venturi Nozzles Using a Transitional Model

Numerical Simulation of Open-Channel Flow in 90-Degree Combining Junction

Unsteady flow simulation using the curvilinear multiple-relaxation-time lattice Boltzmann method: Danube River case study