Abstract:Aiming at addressing the contradiction between the high-speed real-time positioning and multi-channel signal processing in multi-beam sonar systems, in this work we present a real-time multi-beam sonar system based on a Field Programmable Gate Array (FPGA) and Digital Signal Processing (DSP) from two perspectives, i.e., hardware implementation and software optimization. In terms of hardware, an efficient high-voltage pulse transmitting module and a multi-channel data acquisition module with time versus gain (TVG) compensation with characteristics such as low noise and high phase amplitude consistency, are proposed. In terms of algorithms, we study three beamforming methods, namely delay-and-sum (D&S), direct-method (DM) and Chirp Zeta Transform (CZT). We compare the computational efficiency of DM and CZT in the digital domain. In terms of software, according to the transmission bandwidth of the Gigabit Ethernet and a serial rapid IO (SRIO) interface, the data transmission paths of the acquired data and the beam pattern between the FPGA, the DSP, and a personal computer (PC) are planned. A master-slave multi-core pipelined signal processing architecture is designed based on DSP, which enhances the data throughput of the signal processor by seven times as compared with that of the single-core operation. The experimental results reveal that the sound source level of the transmitting module is around 190.25 dB, the transmitting beam width is 64° × 64°, the background noise of the acquisition module is less than 4 μVrms, the amplitude consistency error of each channel is less than -6.55 dB, and the phase consistency error is less than 0.2°. It is noteworthy that the beam number of the sonar system is 90 × 90, the scanning angle interval is 0.33°, the working distance ranges from 5 m to 40 m, and the maximum distance resolution is 0.384 m. In the positioning experiment performed in this work; the 3-D real-time position of the baffle placed in the detection sector is realized. Please note that the maximum deviation of azimuth is 2°, the maximum deviation of elevation is 2.3°, and the maximum distance deviation is 0.379 m.

Design and analysis of multi-channel signal acquisition circuit based on FPGA

A novel synchronized methods of underwater acoustic signal scheme based on DSPs

Design and Implementation of a High-Speed Sonar Data Transmission System

Underwater Mobile Platform Data Acquisition and Transmission System Design

Design and Implementation of a Long-Term Ship-Monitoring System Using Vector Hydrophone

Implementation and Application of Underwater Acoustic Sensor Nodes

High speed video signal acquisition and processing system based on FPGA technique

A Coherent Underwater Acoustic Communication System Based on Joint Iterative Equalization and Decoding Algorithm

A Real-Time 3-D Underwater Acoustical Imaging System

A Wideband MIMO Underwater Acoustic Communication Experimental System

Design of Multichannel Multirate Signal Acquisition System Based on FPGA

Design of Multi-channel Real-time Signal Acquisition System

Design and Implementation of a Real-Time Multi-Beam Sonar System Based on FPGA and DSP

Design of Intelligent Ultrasonic Power Source Based on FPGA

Improvement and Implementation of FPGA Based Seismic Data Acquisition Unit

Designing and implementing audio monitoring system with FPGA platform

Design of multi-channel synchronization signal acquisition method based on FPGA

Single carrier FDMA over underwater acoustic channels

Realization of Active Noise Control Platform Based on FPGA

Design of portable 3 D underwater sonar real-time imaging system

Design of Super Multi-Channel and High-Speed Data Acquisition System Based on FPGA