Abstract:Fouling is one of the most significant problems for internally enhanced tubes installed in the shell and tube condensers. Due to the lack of long-term test data, current fouling models are developed based on accelerated particulate fouling tests that have the low precision and hence are inapplicable for predicting combined fouling in most practical cooling tower systems. In addition, the constant values of fouling resistance (factor) recommended by the Air-Conditioning, Heating, and Refrigeration Institute (AHRI) are extremely limited under different operating conditions. To overcome these challenges, this research developed and validated two fouling prediction models based on experimental long-term tests. One of the models was in the form of a ratio of asymptotic fouling resistance of the enhanced tube to that of the plain tube (<math>Rf∗/Rf,p∗</math>), and the other one was in the form of the asymptotic fouling resistance of the directly enhanced tube (<math>Rf∗</math>). Both models considered water quality, water velocity, and the tube geometries as the variables with the acceptable accuracy for prediction. 1) For the water quality, the parameter of valid concentration (<math>Ccom</math>) of cooling water was defined in this study, which reflected the potential amount of valid components to form the fouling. 2) For the water velocity, its impacts on the two critical parameters of the fouling process: sticking probability (<math>P</math>) and deposit bond strength (<math>ξ</math>) were investigated using experimental studies. Test results showed that in enhanced tubes with the increased water velocity the sticking probability (<math>P</math>) decreased continuously while the deposit bond strength (ξ) initially increased, and then, decreased. 3) For the tube geometries, by taking the parameters of tube geometries as variables the multi-variable correlations of the sticking probability (<math>P</math>) and deposit bond strength (<math>ξ</math>) were developed. From the results the generalized fouling prediction model as a ratio of asymptotic fouling resistance (<math>Rf∗/Rf,p∗</math>) was recommended for the application in HVAC&R industry due to its suitability and accuracy in practical project applications.

Fouling resistance prediction based on GA–Elman neural network for circulating cooling water with electromagnetic anti-fouling treatment

Study of periodic fouling prediction method based on fuzzy neural network

Fouling Prediction of a Heat Exchanger Based on Wavelet Neural Network Optimized by Improved Particle Swarm Optimization Algorithm

Fouling prediction of heat exchanger surface under alternating magnetic field based on IGWO–SVR

Using Artificial Intelligence-Based Algorithms to Identify Critical Fouling Factors and Predict Fouling Behavior in Anaerobic Membrane Bioreactors

Prediction of condenser fouling based on locally weighted partial least squares regression algorithm

On-line Measurement for the BHE Fouling of Brewery Wort Evaporator Using a Soft Sensing Approach

Prediction of heat exchanger fouling for predictive maintenance using artificial neural networks

Prediction and Quantifying Parameter Importance in Simultaneous Anaerobic Sulfide and Nitrate Removal Process Using Artificial Neural Network

Prediction of Anoxic Sulfide Biooxidation under Various Hrts Using Artificial Neural Networks

Online Prediction Model Based on Fuzzy Neural Network for the Effluent Ammonia Concentration of A2/O System

Enhancing Real-Time Prediction of Effluent Water Quality of Wastewater Treatment Plant Based on Improved Feedforward Neural Network Coupled with Optimization Algorithm

Using an enhanced ant lion optimizer to improve artificial neural networks for the prediction of food-grade sodium alginate treatment effects for ready-mixed concrete plant wastewater

Successful Prediction for Coagulant Dosage and Effluent Turbidity of a Coagulation Process in a Drinking Water Treatment Plant Based on the Elman Neural Network and Random Forest Models

A Fuzzy Neural Network-Based Soft Sensor for Modeling Nutrient Removal Mechanism in a Full-Scale Wastewater Treatment System

Fouling Potential Prediction and Multi-Objective Optimization of a Flue Gas Heat Exchanger Using Neural Networks and Genetic Algorithms

A generalized prediction model of waterside fouling for internally enhanced tubes in shell and tube condensers

Prediction Model of Fouling Thickness of Heat Exchanger Based on TA-LSTM Structure

Intelligent Control of the Electrochemical Nitrate Removal Basing on Artificial Neural Network (ANN)

Prediction of Residual Aluminum Concentration and Size in Water Plants of South-to-North Water Transfer Project Through Machine Learning

A Fuzzy Neural Network Model for Monitoring A2/O Process Using On-Line Monitoring Parameters