Abstract:The chemical composition and structure of the solid electrolyte interphase (SEI) are two of the key factors that determine the reversibility of lithium-metal (Li) anodes for next-generation batteries. As a result, much of the research aimed at enabling practical Li-metal batteries emphasizes tuning SEI composition, either via electrolyte formulation 1–5 or synthesis of artificial SEIs. 6–8 Ideally, the lithium SEI should minimize parasitic side reactions by effectively passivating Li while also promoting facile conduction of lithium ions (Li + ). To do this, SEI materials must have high (electro)chemical stability, be ionically conductive, and be sufficiently mechanically robust to accommodate substantial volume changes. However, studying these properties in bulk-scale materials often yields values that diverge by orders of magnitude from those observed in SEIs. For example, typical SEI ionic conductivities lie in the range of 10 -7 -10 -9 S cm -1 , yet bulk ionic conductivity measurements of relevant materials such as lithium carbonate, lithium fluoride, and lithium oxide ranges from 10 -18 and 10 -10 S cm -1 . 9 Our group has developed a technique to directly study these materials at realistic length scales by synthesizing model interphases through the reaction of gases with Li. 10,11 Our previous work on Li 2 O and LiF revealed that Li 2 O is a better Li + conductor than LiF (~1 x 10 -9 S cm -1 vs ~5.2 x 10 -10 S cm -1 ), 11 and that these species’ chemical stability varies substantially in different electrolytes. 12 One of the remaining key SEI materials is lithium carbonate, which has been proposed to act as a metastable phase in the outer portion of the SEI. 13 In this work, we have developed a technique to synthesize Li 2 CO 3 films via sequential reaction of oxygen and carbon dioxide with clean lithium surfaces. Using scanning electron microscopy and air-exposure tests, we can confirm that these films are conformal and generally pinhole-free. Titration gas chromatography (TGC) 14 was used to quantify relative proportions of lithium carbonate, metallic lithium, and lithium carbide, and X-ray photoelectron spectroscopy (XPS) offers insights into how composition changes across the depth of the film. These films were then used as a platform to further investigate the reactivity of Li 2 CO 3 with different electrolytes, comparing carbonates versus ethers and varying the lithium salt used. Electrochemical impedance spectroscopy (EIS) offers insights into the evolution of transport properties at these interphases, while electrolyte soak tests coupled with gas chromatography of gas-phase products and TGC of solid-phase products can track their chemical evolution. Taken together, this work illuminates how lithium carbonate may evolve during battery cycling, offering perspective that can help guide future design of Li-metal SEIs. References Liu, Y. et al. Solubility-mediated sustained release enabling nitrate additive in carbonate electrolytes for stable lithium metal anode. Nat. Commun. 1–10 (2018). Suo, L. et al. Fluorine-donating electrolytes enable highly reversible 5-V-class Li metal batteries. Proc. Natl. Acad. Sci. 115 , 1156–1161 (2018). Chae, O. B., Adiraju, V. A. K. & Lucht, B. L. Lithium Cyano Tris(2,2,2-trifluoroethyl) Borate as a Multifunctional Electrolyte Additive for High-Performance Lithium Metal Batteries. ACS Energy Lett. 6 , 3851–3857 (2021). Li, Y. et al. Correlating Structure and Function of Battery Interphases at Atomic Resolution Using Cryoelectron Microscopy. Joule 2 , 2167–2177 (2018). Zhao, Q. et al. Upgrading Carbonate Electrolytes for Ultra‐stable Practical Lithium Metal Batteries. Angew. Chemie Int. Ed. 61 , e2021162 (2021). Zhao, J. et al. Surface Fluorination of Reactive Battery Anode Materials for Enhanced Stability. J. Am. Chem. Soc. 139 , 11550–11558 (2017). Li, Y. et al. Robust Pinhole-free Li3N solid electrolyte grown from molten lithium. ACS Cent. Sci. 4 , 97–104 (2018). Kozen, A. C. et al. Next-Generation Lithium Metal Anode Engineering via Atomic Layer Deposition. ACS Nano 9 , 5884–5892 (2015). Lorger, S., Narita, K., Usiskin, R. & Maier Films of Li, J. Enhanced ion transport in Li2O and Li2S films. Chem. Commun 57 , 6503–6506 (2021). He, M., Guo, R., Hobold, G. M., Gao, H. & Gallant, B. M. The intrinsic behavior of lithium fluoride in solid electrolyte interphases on lithium. PNAS 117 , 73–79 (2020). Guo, R. & Gallant, B. M. Li 2 O Solid Electrolyte Interphase: Probing Transport Properties at the Chemical Potential of Lithium. Chem. Mater 32 , 5525–5533 (2020). Guo, R., Wang, D., Zuin, L. & Gallant, B. M. Reactivity and Evolution of Ionic Phases in the Lithium Solid−Electrolyte Interphase. ACS Energy Lett. 877–885 (2021) doi:10.1021/acsenergylett.1c00117. Han, B. et al. Poor Stability of Li2CO3 in the Solid Electrolyte Interphase of a Lithium-Metal Anode Revealed by Cryo-Electron Microscopy. Adv. Mater. 33 , 2100404 (2021). Hobold, G. M. & Gallant, B. M. Quantifying Capacity Loss Mechanisms of Li Metal Anodes beyond Inactive Li0. ACS Energy Lett. 4 , 3458–3466 (2022).

Li-Metal Anode in a Conventional Li-Ion Battery Electrolyte: Solid Electrolyte Interphase Formation using Ab Initio Molecular Dynamics

Ab Initio Insights into the Solid Electrolyte Interphase Formation in Lithium Metal Batteries with Carbonate Electrolytes

Solid Electrolyte Interphase Formation at the Ionic Liquid Electrolyte—Lithium-Metal Interface Using an Ab Initio Molecular Dynamics Approach

Probing the Stability of Lithium Carbonate in the Lithium-Metal Solid Electrolyte Interphase

Role of Inorganic Surface Layer on Solid Electrolyte Interphase Evolution at Li-Metal Anodes

Lessons Learned from Semi-Empirical Methods for the Li-Ion Battery Solid Electrolyte Interphase

Preferential decomposition of the major anion in a dual-salt electrolyte facilitates the formation of organic-inorganic composite solid electrolyte interphase

Engineering Solid Electrolyte Interphase Composition by Assessing Decomposition Pathways of Fluorinated Organic Solvents in Lithium Metal Batteries

Reduction Mechanism of Solid Electrolyte Interphase Formation on Lithium Metal Anode: Fluorine-Rich Electrolyte

The Resistive Nature of Decomposing Interfaces of Solid Electrolytes with Alkali Metal Electrodes

Molecular Understanding of Li Metal Anode

Tailoring Electrolyte Solvation Chemistry toward an Inorganic-Rich Solid-Electrolyte Interphase at a Li Metal Anode

First-Principles Insights on the Formation Mechanism of Innermost Layers of Solid Electrolyte Interphases on Carbon Anodes for Lithium-Ion Batteries

Electrochemical formation of bis(fluorosulfonyl)imide-derived solid-electrolyte interphase at Li-metal potential

Molecular-Level Insight into the Interfacial Reactivity and Ionic Conductivity of a Li-Argyrodite Li6PS5Cl Solid Electrolyte at Bare and Coated Li-Metal Anodes

Fluorinated Carbamate-Based Electrolyte Enables Anion-Dominated Solid Electrolyte Interphase for Highly Reversible Li Metal Anode

Lessons Learned from Semiempirical Methods for the Li-Ion Battery Solid Electrolyte Interphase

Fine-tuned molecular design toward a stable solid electrolyte interphase on a lithium metal anode from in silico simulation

Unraveling the Dynamics of Solid-Electrolyte Interphase (SEI) Formation on Lithium Metal: Insights from Multiscale Modeling

Multiscale Simulation of Solid Electrolyte Interface Formation in Fluorinated Diluted Electrolytes with Lithium Anodes

Exploring the Efficiency of Lithium Stripping/Plating in Solid Polymer Anode-Free Lithium Cells