Ag modified bismuth ferrite nanospheres as a chlorine gas sensor

Qiang Li,Weiming Zhang,Chao Wang,Jiangwei Ma,Li Ning,Huiqing Fan

DOI: https://doi.org/10.1039/c8ra06247a

IF: 4.036

2018-01-01

RSC Advances

Abstract:Cl 2 sensing properties were remarkably enhanced for Ag modified BFO nanospheres.

chemistry, multidisciplinary

What problem does this paper attempt to address?

Amphiphilic polymer-encapsulated Au nanoclusters with enhanced emission and stability for highly selective detection of hypochlorous acid

Yiling Li,Shuxiao Yi,Zhongli Lei,Yan Xiao

DOI: https://doi.org/10.1039/d1ra01634b

IF: 4.036

2021-01-01

RSC Advances

Abstract:It is of vital importance to develop probes to monitor hypochlorous acid (HClO) in biological systems as HClO is associated with many important physiological and pathological processes. Metal nanoclusters (NCs) are promising luminescent nanomaterials for highly reactive oxygen species (hROS) detection on the basis of their strong reaction ability with hROS. However, metal NCs typically can respond to most common hROS and are susceptible to etching by biothiols, hindering their application in the construction of effective HClO probes. Herein, we proposed a strategy to develop a nanoprobe based on Au NCs for highly sensitive and selective detection of HClO. We synthesized luminescent benzyl mercaptan-stabilized Au NCs and encapsulated them with an amphiphilic polymer (DSPE-PEG). After encapsulation, an obvious emission enhancement and good resistance to the etching by biothiols for Au NCs were achieved. More importantly, the DSPE-PEG encapsulated Au NCs can be used as a nanoprobe for detection of HClO with good performance. The luminescence of the Au NCs was effectively and selectively quenched by HClO. A good linear relationship with the concentration of HClO in the range of 5-35 mu M and a limit of detection (LOD) of 1.4 mu M were obtained. Additionally, this nanoprobe was successfully used for bioimaging and monitoring of HClO changes in live cells, suggesting the application potential of the as-prepared amphiphilic polymer-encapsulated Au NCs for further HClO-related biomedical research.
In-situ Controllable Preparation of ZIF-8-wrapped ZnO Heterojunction Nanorods Array for Ppb-Level Cl2 Detection Operated at Near Room Temperature

Xiaoqian Meng,Rui Gao,Ming Zheng,Xin Zhou,Xianfa Zhang,Xiaoli Cheng,Yingming Xu,Shan Gao,Lihua Huo

DOI: https://doi.org/10.1016/j.cej.2024.152631

IF: 15.1

2024-01-01

Chemical Engineering Journal

Abstract:Real-time monitoring of chlorine gas (Cl2) with a strong irritating odor is an indispensable means of avoiding its contamination of the air and harm to the body. To achieve this purpose, a novel gas-sensitive material capable of detecting low concentrations of Cl2 at near room temperature is developed in this paper. ZIF-8 with a kinetic diameter of 3.4 & Aring; in the designed ZnO@ZIF-8 composites is able to sieve gas molecules with different kinetic diameters, enabling effective improvement of the selectivity of the gas-sensitive materials. In addition, the porous structure of ZIF-8 can provide more reactive sites, which is conducive to improving gas adsorption capacity and providing of channels for gas diffusion. In this study, ZnO@ZIF-8 heterojunction composites are prepared by combining the advantages of ZnO and ZIF-8, which provides a new method for real-time monitoring of low concentrations of Cl2, and also has potential practical applications in fields such as environmental monitoring and industrial safety.
ZnO–SnO2 nano-heterostructures with high-energy facets for high selective and sensitive chlorine gas sensor

Xiaokun Zheng,Huiqing Fan,Hao Wang,Benben Yan,Jiangwei Ma,Weijia Wang,Arun Kumar Yadav,Wenqiang Dong,Shuren Wang

DOI: https://doi.org/10.1016/j.ceramint.2020.07.239

IF: 5.532

2020-12-01

Ceramics International

Abstract:The n-ZnO/n-SnO2 nano-heterostructures surrounded by high-energy facets have been designed and synthesized via a simple two-stage route and used as functional materials of chlorine gas sensor. The composition, morphology and structure of ZnO–SnO2 nano-heterostructures are characterized by powder X-ray diffraction (XRD), field emission scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM) and X-ray photoelectron spectroscopy (XPS). It is found that both the SnO2 octahedra nanoparticles and the ZnO–SnO2 nano-heterostructures are surrounded by high-energy (221) facets. The sensor with the ZnO–SnO2 nano-heterostructure nanoparticles presents a much higher response (230.52) to Cl2 (upgrade to 50 times) than that of the sensor with the pure SnO2 nanoparticles. Moreover, a new and reasonable method is used to calculate the detection limit of two sensors. The sensor with 10% ZnO–SnO2 sample (ZnO: SnO2 = 10%, mol%) reveals lower detection limit (0.06 ppm) than that of pure SnO2 sample (1.10 ppm). The superior Cl2 sensing performance is closely related to the effects of the high-energy facets and the formation of energy barrier between ZnO and SnO2.

materials science, ceramics
Enhanced Cl-2 Sensing Performance by Decorating Discrete Au Nanoparticles on Octahedral Cdin2o4 Crystals

Yanli Liu,Wei Wang,Tianquan Lin,Fuhui Liao,Fuqiang Huang,Jianhua Lin

DOI: https://doi.org/10.1039/c3ce26755e

IF: 3.756

2013-01-01

CrystEngComm

Abstract:High response to low-concentration Cl2 gas was achieved by a sensor based on octahedral crystals of CdIn2O4 decorated by Au nanoparticles (Au NPs). CdIn2O4 crystals were synthesized in a one-step hydrothermal reaction and Au NPs were functionalized onto CdIn2O4 also in a hydrothermal reaction. Systematic investigations revealed that the Au NPs-decorated CdIn2O4 samples possessed a superior sensing capability, compared with bare CdIn2O4 crystals. The optimal Au NPs loading (2 wt%) resulted in 8.3-fold enhancement in gas response to 1 ppm Cl2 at the working temperature, 190 °C, compared to bare CdIn2O4. The Au NPs on the surface enhanced the sensor response due to the catalytic activity of Au NPs and the strong electronic interaction between Au NPs and CdIn2O4 support. This work provides a promising approach for fabricating such a hybrid structure with excellent gas sensing capabilities.
Water-Soluble Photoluminescent Ag Nanoclusters Stabilized by Amphiphilic Copolymers As Nanoprobe for Hypochlorite Detection

Xiangfang Lin,Qinhui Dong,Yalin Chang,Shusheng Zhang,Pengfei Shi

DOI: https://doi.org/10.3390/chemosensors12080166

2024-01-01

Chemosensors

Abstract:Luminescent Ag nanoclusters (Ag NCs) are a promising probe material for sensing and bioimaging applications. However, the intrinsic obstacle of poor water stability and photostability greatly restrict their practical application in biological systems. Herein, we report the intracellular hypochlorite (ClO−) detection with amphiphilic copolymer-modified luminescent Ag NCs with good biocompatibility and photostability. The Ag NCs were synthesized by using chemically inert hydrophobic ligands and then modified with an amphiphilic (1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy(poly(ethylene glycol))-2000]) (DSPE-PEG-2000) and sodium dodecyl sulfonate (SDS) for phase transfer. It was found that the approach of the removal of organic solvents during the phase transfer has remarkable influences on the properties of the Ag NCs, including their size, luminescence property, and aqueous stability. Furthermore, the silver core of Ag NCs could be oxidatively damaged by ClO−, thereby causing photoluminescence (PL) quenching. The ClO−-induced PL quenching was specific over the other common reactive oxygen species (ROS) as well as some common interferences. Finally, they have been successfully applied as a fluorescent nanoprobe for detecting exogenous and endogenous ClO− in living cells.
Amorphous metal-organic frameworks-derived In 2 O 3 microstructures with abundant oxygen vacancies for superior chlorine gas sensing performance

Ziwei Zhang,Jiangwei Ma,Weixiao Hou,Haichao Zhai,Hui Yong,Jifan Hu,Kewei Zhang,Yu Zhang,Haiwen Wang,Jiachen Liu

DOI: https://doi.org/10.1016/j.snb.2024.137072

IF: 9.221

2024-12-05

Sensors and Actuators B Chemical

Abstract:Metal-organic frameworks (MOFs) are characterized by their porous structures, which provide an exceptionally large specific surface area and a precisely controlled composition. Amorphous MOFs ( a MOFs) integrate the diverse properties of MOFs with those of amorphous materials, such as hierarchical morphology and abundant deficiencies. Therefore, a MOFs serve as promising precursors for metal oxides with porous structures and rich vacancies. NH 2 -MIL-68 (In) is a novel indium-MOF material with promising features. In this research, the amorphous NH 2 -MIL-68 (In) ( a NH 2 -MIL-68 (In)) was chosen as the template. Indium oxide rough straight rods ( a -In 2 O 3 RSRs) with extensive oxygen vacancies were prepared, where a - indicates that the precursor is amorphous. As a result, the a -In 2 O 3 RSRs sensor demonstrated an outstanding gas sensing response towards 2 ppm chlorine (Cl 2 ) at a low temperature of 160°C. This study is the first to report that the a MOFs can be employed as gas sensing materials with superior Cl 2 detection capabilities, offering a promising method for real-time gas monitoring.

chemistry, analytical,electrochemistry,instruments & instrumentation
Identification CH3F and CH3Cl molecules by the beryllium oxide nanocluster in presence of environmental gases: Electronic study via DFT

Rahman S. Zabibah,Usama S. Altimari,Mustafa Humam Sami,Hala Bahir,Hayder Tariq,Abdul Razzaq T. Zaboun,Ali Alkhathami,Ali Alsalamy,Xin Hong,Li Ching

DOI: https://doi.org/10.1016/j.inoche.2023.111264

IF: 3.428

2023-10-01

Inorganic Chemistry Communications

Abstract:This paper implemented density functional theory (DFT) analysis to examine the adsorption of CH3Cl (chloromethane) CH3F (fluoromethane), O2, and N2 onto BeO nanocluster (BeONCs). The interactions of CH3F, O2, and N2 with BeONC were found to be poor. Hence, BeONCs could not be used for the detection of CH3F, O2, and N2. However, CH3Cl significantly raised the reactivity and sensitivity of sheets. The adsorption of CH3Cl diminished the HOMO-LUMO gap of the nanotube by nearly 38.6% (from 7.01 to 4.28 eV). This substantially enhanced electrical conductivity. Thus, a large conductivity variation could be transformed into electronic signals. This implies that BeONC can be a promising detector of CH3Cl. Furthermore, the BeONC work function underwent a large decrease during the adsorption. Hence, it can be said that BeONC may serve as an Φ-type detector of CH3Cl in the mixture of the aforementioned gases. The BeONC desorption recovery time was obtained to be short (16.1 s).

chemistry, inorganic & nuclear
Enhanced performance of the tangerines-like CuO-based gas sensor using ZnO nanowire arrays

Lina Cai,Hairong Li,Huan Zhang,Wenhao Fan,Jianan Wang,Yongchang Wang,Xudong Wang,Ying Tang,Yuzhe Song

DOI: https://doi.org/10.1016/j.mssp.2020.105196

IF: 4.1

2020-01-01

Materials Science in Semiconductor Processing

Abstract:In this work, sensors based on the ZnO nanowire arrays/CuO nanospheres heterostructure were prepared by using the simple low temperature hydrothermal method. X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (HRTEM) and energy dispersive spectrometry (EDX) were used to characterize the crystal phase, structure and surface morphology of the as-prepared samples, respectively. The sensing characteristics of the as prepared samples were systematically measured. Obviously, the sensors based on the ZnO/CuO heterostructure exhibited excellent sensor parameters than pure CuO nanospheres. The response value of the ZnO/CuO heterostructure sensor with the growth time of 5 h (ZC-2) to 100 ppm of ethanol gas is up to 55.4 at 122 °C, which is about 8.8 fold and 3.4 fold more than that of pure CuO nanospheres (R = 6.3) and ZnO nanowire arrays (R = 16.4), respectively. In addition, the ZC-2 sensor exhibits the excellent selectivity for ethanol compared to other test gases. Significant improvement of the gas sensing characteristics was related to the formation of n-p heterojunction. The prepared ZC-2 gas sensor exhibits broad application prospects in the detection of ethanol.
Facile metal-organic frameworks-templated fabrication of hollow indium oxide microstructures for chlorine detection at low temperature

Jiangwei Ma,Huiqing Fan,Xiaokun Zheng,Hao Wang,Nan Zhao,Mingchang Zhang,Arun Kumar Yadav,Weijia Wang,Wenqiang Dong,Shuren Wang

DOI: https://doi.org/10.1016/j.jhazmat.2020.122017

2020-04-05

Abstract:Metal oxides with the hollow microstructure by the facile synthetic strategy are hopeful in applications for photocatalysis, supercapacitor, and gas sensor owing to their large surface areas, porosity ratio and rich active sites. In this work, indium oxide porous hollow rods (In2O3 PHRs) are successfully prepared using metal-organic frameworks (MOFs) as the template. The morphology of In2O3 PHRs is hexagonal hollow micro-rods with a porous structure. The investigation on the gas-sensing performance reveals that the In2O3 PHRs sensor displays outstanding sensitivity and selectivity toward 10 ppm chlorine gas (Cl2) at low operational temperature (160 °C). Furthermore, the In2O3 PHRs sensor displays a low detection limit (3.2 ppb) and short response and recovery time (38/13 s). The unique morphology and abundant oxygen vacancies are conduced to the excellent gas-sensing activities, which is benefited from the utilization and decomposition of In-MOFs precursor. In addition, the gas sensing mechanism of reducing gases and oxidizing gases is deduced in detail for the In2O3 PHRs sensor.
Ag-Modified In₂O₃/ZnO Nanobundles with High Formaldehyde Gas-Sensing Performance.

Fang Fang,Lu Bai,Dongsheng Song,Hongping Yang,Xiaoming Sun,Hongyu Sun,Jing Zhu

DOI: https://doi.org/10.3390/s150820086

2015-01-01

Abstract:Ag-modified In2O3/ZnO bundles with micro/nano porous structures have been designed and synthesized with by hydrothermal method continuing with dehydration process. Each bundle consists of nanoparticles, where nanogaps of 10-30 nm are present between the nanoparticles, leading to a porous structure. This porous structure brings high surface area and fast gas diffusion, enhancing the gas sensitivity. Consequently, the HCHO gas-sensing performance of the Ag-modified In2O3/ZnO bundles have been tested, with the formaldehyde-detection limit of 100 ppb (parts per billion) and the response and recover times as short as 6 s and 3 s, respectively, at 300 °C and the detection limit of 100 ppb, response time of 12 s and recover times of 6 s at 100 °C. The HCHO sensing detect limitation matches the health standard limitation on the concentration of formaldehyde for indoor air. Moreover, the strategy to synthesize the nanobundles is just two-step heating and easy to scale up. Therefore, the Ag-modified In2O3/ZnO bundles are ready for industrialization and practical applications.
Highly Selective Chloromethanes Detection Based on Quartz Crystal Microbalance Gas Sensors with Ba-MOFs

Yanan Liu,Yu Fan,Chaoyi Hou,Wei Du,Dan Zhang,Yu Liu,Jiaqiang Xu,Yue-Ling Bai

DOI: https://doi.org/10.1021/acs.inorgchem.1c02185

IF: 4.6

2021-10-22

Inorganic Chemistry

Abstract:Three new metal-organic frameworks (MOFs), {(CH3NH3)3[Ba2(TTHA)(NO3)(H2O)2]}·2H2O (1), {(CH3NH3)4[Ba3(HTTHA)2(H2O)7]}·3H2O (2), and [Ba7(TTHA)2(NO3)2(H2O)10]·2H2O (3) (H6TTHA = 1,3,5-triazine-2,4,6-triamineh-exaacetic acid) have been synthesized and characterized. The sensing properties of 1-3 were explored with regard to volatile organic compounds (VOCs) by the quartz crystal microbalance (QCM) technique. The results indicated that 1 and 2 have a much higher selectivity and response to chloromethanes (CH2Cl2, CHCl3, and CCl4) compared with H2O, CH3OH, CH3CH2OH, CH3CN, (CH3)2CO, C6H6, C6H5CH3, C6H5CH2CH3, and C6H5Cl at room temperature. Furthermore, 1 and 2 sensing film also exhibits excellent reversibility and stability, and the response and recovery times are almost within 10 s. 3 displays a lower response and poor selectivity to the above VOCs. The significant difference may be caused by their different structural characteristics. The Ba2+ ions are all decacoordinated in 1 and 2, while Ba2+ ions have more open metal sites in 3. So, the high selectivity and response of 1 and 2 may be due to the exchange of coordination water molecules with chloromethanes and possible electrostatic effects between (CH3NH3)+ cations and chloromethanes containing more electronegative Cl atoms. DFT calculation results show that the bond energy of Ba-Cl and Ba-O is not much different, so chloromethanes at high concentrations may exchange coordination water to form weak Ba···Cl interactions and show higher response values. 3 has no obvious VOCs selectivity and higher response due to more open sites of Ba2+ ions and smaller pore size. This work develops a fast and effective method to detect chloromethanes, providing a new opportunity for designing QCM gas sensors coated with different MOF materials.

chemistry, inorganic & nuclear
Highly sensitive fluorescence detection of chloride ion in aqueous solution with Ag-modified porous g-C3N4 nanosheets

Zishu Zhang,Ying Gao,Peng Li,Binhong Qu,Zhiyuan Mu,Yang Liu,Yang Qu,Degui Kong,Qing Chang,Liqiang Jing

DOI: https://doi.org/10.1016/j.cclet.2020.05.024

IF: 9.1

2020-10-01

Chinese Chemical Letters

Abstract:The porous g-C3N4 (PCN) nanosheets are successfully synthesized and further modified with nano-sized Ag by a simple wet-chemical process. Interestingly, the Ag-modified porous g-C3N4 (Ag-PCN) nanosheets exhibit competitive fluorescence detection performance of chloride ion (Cl−) in aqueous solution. Under the optimized conditions, the concentration of Cl− could be quantitative analyzed with the Ag-PCN in a wide detection range from 0.5 mmol/L to 0.1 mol/L, with a low detection limitation of 0.06 mmol/L. It is confirmed that the fluorescence of PCN could be effectively decayed by the photoinduced charge transfer via the adsorbed Cl− for trapping holes, mainly by means of the time-resolved fluorescence and surface photovoltage spectra. The porous structure and modified Ag promote the adsorption of Cl− on resulting Ag-PCN, leading to excellent fluorescence detection for Cl−. This work provides a feasible route to develop a fluorescence detection of Cl− with g-C3N4 nanosheets in environment water.

chemistry, multidisciplinary
Ag-Modified In2O3/ZnO Nanobundles with High Formaldehyde Gas-Sensing Performance.

fang fang,lu bai,dongsheng song,hongping yang,xiaoming sun,hongyu sun,jing zhu

DOI: https://doi.org/10.3390/s150820086

IF: 3.9

2015-01-01

Sensors

Abstract:Ag-modified In2O3/ZnO bundles with micro/nano porous structures have been designed and synthesized with by hydrothermal method continuing with dehydration process. Each bundle consists of nanoparticles, where nanogaps of 10-30 nm are present between the nanoparticles, leading to a porous structure. This porous structure brings high surface area and fast gas diffusion, enhancing the gas sensitivity. Consequently, the HCHO gas-sensing performance of the Ag-modified In2O3/ZnO bundles have been tested, with the formaldehyde-detection limit of 100 ppb (parts per billion) and the response and recover times as short as 6 s and 3 s, respectively, at 300 degrees C and the detection limit of 100 ppb, response time of 12 s and recover times of 6 s at 100 degrees C. The HCHO sensing detect limitation matches the health standard limitation on the concentration of formaldehyde for indoor air. Moreover, the strategy to synthesize the nanobundles is just two-step heating and easy to scale up. Therefore, the Ag-modified In2O3/ZnO bundles are ready for industrialization and practical applications.
Ag-Modified In2O3/ZnO Nanobundles with High Formaldehyde Gas-Sensing Performance

Fang Fang,Lu Bai,Dongsheng Song,Hongping Yang,Xiaoming Sun,Hongyu Sun,Jing Zhu

DOI: https://doi.org/10.3390/s150820086

IF: 3.9

2015-01-01

Sensors

Abstract:Ag-modified In2O3/ZnO bundles with micro/nano porous structures have been designed and synthesized with by hydrothermal method continuing with dehydration process. Each bundle consists of nanoparticles, where nanogaps of 10–30 nm are present between the nanoparticles, leading to a porous structure. This porous structure brings high surface area and fast gas diffusion, enhancing the gas sensitivity. Consequently, the HCHO gas-sensing performance of the Ag-modified In2O3/ZnO bundles have been tested, with the formaldehyde-detection limit of 100 ppb (parts per billion) and the response and recover times as short as 6 s and 3 s, respectively, at 300 °C and the detection limit of 100 ppb, response time of 12 s and recover times of 6 s at 100 °C. The HCHO sensing detect limitation matches the health standard limitation on the concentration of formaldehyde for indoor air. Moreover, the strategy to synthesize the nanobundles is just two-step heating and easy to scale up. Therefore, the Ag-modified In2O3/ZnO bundles are ready for industrialization and practical applications.
Au‐NP‐Decorated Crystalline FeOCl Nanosheet: Facile Synthesis by Laser Ablation in Liquid and Its Exclusive Gas Sensing Response to HCl at Room Temperature

Yingying Wang,Hongwen Zhang,Yudong Zhu,Zhengfei Dai,Haoming Bao,Yi Wei,Weiping Cai

DOI: https://doi.org/10.1002/admi.201500801

IF: 5.4

2016-01-01

Advanced Materials Interfaces

Abstract:Here an alternative preparation route, pulsed laser ablation in liquid (LAL) of FeCl3 solution, is reported to facilely synthesize crystalline iron oxychloride (FeOCl) nanosheets at ambient conditions. Well‐dispersed spherical gold (Au) nanoparticles (NPs) are simultaneously decorated on surface of the FeOCl nanosheets, which possess (010) preferred orientations with microsized dimensions in planar and tens of nanometers in thickness. The crystalline size and composition of the Au/FeOCl can be effectively modulated by simply changing FeCl3 concentrations. Technical observations illustrate that the nanocomposites possess good thermal stability and surface of which adsorbs abundant H2O molecularly and oxygen species chemically. The FeOCl nanosheets are formed through chemical side hydrolysis reaction in the localized liquid region with gradient temperature, which is derived from thermal transfer of LAL‐induced plasma plume. The Au/FeOCl nanocomposites, as chemiresistors, show exceptionally high sensing response and perfect selectivity to HCl gas at room temperature. The excellent sensing behavior is ascribed to the Au‐NP‐enhanced surface chemisorption of oxygen species and selective adsorption of HCl for FeOCl nanosheets. The synthesized Au/FeOCl nanocomposites provide a new candidate for exclusive HCl detection. And the proposed LAL‐assisted fabrication routes might open new perspectives for formation of other metal oxychloride compounds.
Fermi Level Regulation of Single-Walled Carbon Nanotubes by Metal Chloride Doping for Enhanced No2 Sensing Performance

Ruxuan Zhang,Mingkui Zhu,Tian,Huan Yin,Tianhao Zhang,Jing Liu,Keyong Dong,Xun Li,Bo Zhao,Yanjie Su

DOI: https://doi.org/10.1016/j.diamond.2024.111777

IF: 3.806

2024-01-01

Diamond and Related Materials

Abstract:Pristine single-walled carbon nanotubes (SWCNTs) typically exhibit limited sensitivity due to the low charge transfer dynamics between nanotubes and gas molecules. Among various enhancement methods, the Fermi level regulation proves to be effective in promoting the charge transfer between SWCNTs and gas molecules, consequently improving the sensing performance. Herein, we firstly report a non-destructive method to regulate the Fermi level of SWCNTs through doping metal chlorides, and the interfacial charge transfer between SWCNTs and different metal chlorides has been well investigated by combining Raman shift with X-ray photoelectron spectroscopy. Experimental results reveal that the interfacial charge transfer dynamics determine the sensing properties of SWCNTs doped with chlorides. The as-fabricated FeCl3-doped SWCNT sensors exhibit a high response of 196.9 % in response to 100 ppb NO2 gas with excellent selectivity. The Kelvin probe force microscope (KPFM) results directly prove the doping effect of metal chlorides due to the shift down of Fermi level of SWCNTs after doping FeCl3. Our work not only proposes a novel method to controllably regulate the Fermi level of SWCNTs but also provides a guidance for high-performance SWCNT-based sensing devices.
Inverse conductance signal outputs of solid-state AgCl electrochemistry dependent on counteranions of Ag-MOFs

Tingting Yan,Chen-Fei Xie,Zou-Hong Xu,Yi Lu,Wei-Yin Sun

DOI: https://doi.org/10.1016/j.electacta.2022.140688

IF: 6.6

2022-08-20

Electrochimica Acta

Abstract:Metal-organic frameworks (MOFs) as crystalline materials have been extensively applied in the electrochemical sensing. However, the influence of the counteranion of MOFs on electrochemical analysis was rarely reported. In this work, three Ag-MOFs [Ag3(L)3](NO3)3 (A1), [Ag3(L)3](CF3SO3)3 (A2) and [Ag2(L)(NO3)2] (A3) with the same ligand of 1,1,2,2-tetrakis(4-(1H-pyrazol-1-yl)phenyl)ethene (L) but different counteranions were utilized to explore their electrochemical detection performance for chloride (Cl−) ions based on the electrochemical redox of solid-state AgCl. It is interesting to find that the solid-state AgCl derived from A2 with CF3SO3− counteranions exhibits inverse conductance signal output compared with that derived from A1 with counteranions of non-coordinated NO3− or by A3 with coordinated NO3−. Besides, the signals of peak potentials for the solid-state AgCl derived from these Ag-MOFs are stable, which showed excellent linear relationship and high sensitivity, favorable for the further applications. This is the first example of the counteranions of MOFs determined electrochemical sensing of chloride, and revealed the importance of the counteranions of MOFs in the field of the electrochemical sensing.

electrochemistry
Ag 2 SO 4 -Ag 2 S transformation in SnO 2 -based nanofibers for high selectivity and response H 2 S sensors

Weiming Wang,Ji Li,Bo Hu,Shiqiang Zhou,Yong Cai,Ming Zhang

DOI: https://doi.org/10.1088/1361-6528/acbb7e

IF: 3.5

2023-02-15

Nanotechnology

Abstract:Tin-based gas sensors have been developed for many years owing to their advantages of low price, high response and stability. However, selectivity remains a significant issue. Herein, Ag-SnO 2 nanofibers are synthesized using AgCl as the doping reagent. The 3%Ag-SnO 2 nanofibers sensors show a high response of 68 toward 1 ppm H 2 S at 90°C . Besides, the sensor with 3% AgCl possesses the shortest response time about 136 s at 150°C which is only 30% value of the sensor without AgCl doping. It is also demonstrated that the nanofibers show a high selectivity towards H 2 S. According to the ex-situ XPS and XRD results, AgCl was transferred to Ag 2 S after Ag-SnO 2 was exposed to H 2 S, and reversible transformation between Ag 2 SO 4 and Ag 2 S was the main mechanism for H 2 S detection. Compared with pure SnO 2 nanofiber sensors, the presence of Ag 2 S with high conductivity greatly affects the resistance to H 2 S, resulting in high selectivity and response. This mechanism differs from that of the transformation between Ag 2 O and Ag 2 SO 4 . This study may provide a new strategy for the design and investigation of sensors with high selectivity.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
Smart Metal–Organic Frameworks with Reversible Luminescence/Magnetic Switch Behavior for HCl Vapor Detection

Zhong‐Hong Zhu,Zhiqiang Ni,Hua‐Hong Zou,Guangxue Feng,Ben Zhong Tang

DOI: https://doi.org/10.1002/adfm.202106925

IF: 19

2021-09-21

Advanced Functional Materials

Abstract:Smart luminescent metal–organic frameworks (MOFs) demonstrate promising performance in the detection of toxic gases. The incorporation of twisted or rotary organic ligands with aggregation-induced emission (AIE) characteristics can provide further opportunities in designing such smart MOFs with new topologies and stimuli-responsive behaviors. Herein, novel AIE MOFs are reported with reversible luminescence or a magnetic switch for HCl vapor detection. The twisted conformation of tetrakis(4-carboxyphenyl)ethylene (TCPE) ligand leads to the unique [M+–L–M−–L–M]∞ (M = metal clusters, L = ligand) configuration for ZnMOF and CoMOF. Different from conventional MOFs with [M–L]∞ topology, ZnMOF and CoMOF exhibit a blue-to-yellow greenish fluorescence transition and a ferrimagnetic-to-antiferromagnetic switch behavior, respectively, upon recognition of HCl vapor. The adsorbed HCl molecules rather than coordinated ones are determined to be the main reason, and such luminescence and magnetic switch can be induced in a reversible manner via HCl vapor adsorption/desorption processes with high reliability. This work of AIE MOFs with twisted and rotary ligands shall pave new avenue in design of smart MOFs with new topologies and stimuli-responsive behavior for real-time sensing and detection applications.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Bismuth Ferrite-Silver Nanowire Flexible Nanocomposites for Room-Temperature Nitrogen Dioxide Sensing

Sanjeev Patil,Sudha Arumugam,Parasuraman Swaminathan

DOI: https://doi.org/10.1021/acsomega.4c04076

IF: 4.1

2024-06-22

ACS Omega

Abstract:Nitrogen dioxide (NO2) is a major pollutant, causing acid rain, photochemical smog, and respiratory damage. The annual safe limit is 50 parts per billion (ppb), while concentrations exceeding 1 part per million (ppm) can result in respiratory ailments. Conventionally, n-type metal oxide semiconductors operating at elevated temperatures have been utilized for NO2 detection. Recently, p-type semiconductors with their hole accumulation layer, rapid recovery post-gas exposure, and good humidity tolerance are being investigated as potential NO2 sensors, once again working at elevated temperatures. In this work, a room-temperature (27 ± 2 °C) NO2 sensor is demonstrated by using a nanocomposite based on p-type bismuth ferrite (BFO) nanoparticles and silver nanowires (Ag NWs). This nanocomposite is capable of sensing a NO2 gas concentration of up to 0.2 ppm. The BFO nanoparticles are synthesized via a sol-gel route followed by sintering at 500 °C to form the crystalline phase. Nanocomposites are obtained by formulating a dispersion of the BFO nanoparticles and Ag NWs, followed by direct writing on both flexible and rigid substrates. The Ag NWs act as the conducting pathway, reducing the overall electrical resistance and thus enabling room-temperature operation. X-ray diffraction, scanning electron microscopy, and surface area studies provide phase information and surface morphology, and the porous nature of the film helps in room-temperature gas adsorption. The current-voltage and gas-sensing behavior are studied to obtain the optimized molar ratio (4:1 BFO/Ag NWs) for the sensor. The sensor deposited on poly(ethylene terephthalate) (PET) also works under a bent condition, indicating good flexibility. Rapid NO2 sensing was achieved in a BFO-Ag/PET device with response/recovery times of 7/8.5 s and 12/15 s in straight and bent geometries, respectively. Additionally, a good sensitivity of 30 to 60% was achieved for the BFO-Ag/PET device across 100 to 1000 ppb of NO2. The development of a nanocomposite combining an active sensing element (BFO) and a charge-transport element (Ag NWs) opens up a multitude of other application areas.

Ag modified bismuth ferrite nanospheres as a chlorine gas sensor

Amphiphilic polymer-encapsulated Au nanoclusters with enhanced emission and stability for highly selective detection of hypochlorous acid

In-situ Controllable Preparation of ZIF-8-wrapped ZnO Heterojunction Nanorods Array for Ppb-Level Cl2 Detection Operated at Near Room Temperature

ZnO–SnO2 nano-heterostructures with high-energy facets for high selective and sensitive chlorine gas sensor

Enhanced Cl-2 Sensing Performance by Decorating Discrete Au Nanoparticles on Octahedral Cdin2o4 Crystals

Water-Soluble Photoluminescent Ag Nanoclusters Stabilized by Amphiphilic Copolymers As Nanoprobe for Hypochlorite Detection

Amorphous metal-organic frameworks-derived In 2 O 3 microstructures with abundant oxygen vacancies for superior chlorine gas sensing performance

Identification CH3F and CH3Cl molecules by the beryllium oxide nanocluster in presence of environmental gases: Electronic study via DFT

Enhanced performance of the tangerines-like CuO-based gas sensor using ZnO nanowire arrays

Facile metal-organic frameworks-templated fabrication of hollow indium oxide microstructures for chlorine detection at low temperature

Ag-Modified In₂O₃/ZnO Nanobundles with High Formaldehyde Gas-Sensing Performance.

Highly Selective Chloromethanes Detection Based on Quartz Crystal Microbalance Gas Sensors with Ba-MOFs

Highly sensitive fluorescence detection of chloride ion in aqueous solution with Ag-modified porous g-C3N4 nanosheets

Ag-Modified In2O3/ZnO Nanobundles with High Formaldehyde Gas-Sensing Performance.

Ag-Modified In2O3/ZnO Nanobundles with High Formaldehyde Gas-Sensing Performance

Au‐NP‐Decorated Crystalline FeOCl Nanosheet: Facile Synthesis by Laser Ablation in Liquid and Its Exclusive Gas Sensing Response to HCl at Room Temperature

Fermi Level Regulation of Single-Walled Carbon Nanotubes by Metal Chloride Doping for Enhanced No2 Sensing Performance

Inverse conductance signal outputs of solid-state AgCl electrochemistry dependent on counteranions of Ag-MOFs

Ag 2 SO 4 -Ag 2 S transformation in SnO 2 -based nanofibers for high selectivity and response H 2 S sensors

Smart Metal–Organic Frameworks with Reversible Luminescence/Magnetic Switch Behavior for HCl Vapor Detection

Bismuth Ferrite-Silver Nanowire Flexible Nanocomposites for Room-Temperature Nitrogen Dioxide Sensing