Abstract:Titanium and titanium alloy materials are often made as medical implants. Surface properties of titanium medical implants play decisive roles for antibacterial and biological response and tissue biocompatibility. In this study, cathode arc evaporation (CAE) technology was used to deposit TiNb–Zr–Ta and nitrogen-doped TiNb–Zr–Ta coatings with nanostructures on the Ti–6Al–4V dental abutment screws. The deposited coatings were then oxidized at high temperature to produce different oxides on the surface of the coatings. The mechanical properties , antibacterial properties and biocompatibilities of the coatings were analyzed. The effect of coatings on the abutment screw loosening and removal torque between the abutment screw and the pure titanium implant fixture was studied by removal torque measurement. In addition, Staphylococcus aureus (S. aureus) was used for evaluating the antibacterial properties of coatings, and mouse fibroblasts (L929) were used for ISO 10993-5 cytotoxicity analyses to determine whether it had good biocompatibility. Nanolayered structures and multiphases of polycrystalline TiNb–Zr–Ta were obtained by co-deposition of Ta , Zr and TiNb. When small content of N was introduced, the TiNb–Zr–Ta(N) showed a polycrystalline TiNb–Zr–Ta where N atoms entered the metallic lattice at interstitial sites. After oxidation, oxide phases of Ta 2 O 5 , TiO 2 , Nb 2 O 5 and ZrO 2 were formed on the surface of TiNb–Zr–Ta and TiNb–Zr–Ta(N). Ta 2 O 5 was obtained on the surface of the coating prior to other oxides such as TiO 2 , Nb 2 O 5 and ZrO 2 . The deposited TiNb–Zr–Ta and TiNb–Zr–Ta(N) coatings had high contact angle and exhibited a hydrophobic feature, while the annealed TiNb–Zr–Ta–O and TiNb–Zr–Ta(N)–O showed hydrophilicity. The deposited TiNb–Zr–Ta had similar hardness and Young's modulus values to that of the uncoated Ti–6Al–4V. When N was doped, the TiNb–Zr–Ta(N) had the highest hardness and Young's modulus. The hardness of the annealed TiNb–Zr–Ta(N) coating only decreased slightly due to the small oxide layer of ∼140 nm. Compared with the uncoated Ti–6Al–4V, TiNb–Zr–Ta serial coatings deposited on abutment screws had higher removal torques, which prevented the abutment screw of dental implant from loosening after long-term use. The biocompatibility of TiNb–Zr–Ta serial coatings was similar to that of the uncoated Ti–6Al–4V. In addition, the oxidized TiNb–Zr–Ta and TiNb–Zr–Ta(N) coatings had excellent antibacterial properties. It is speculated that the resulting Ta 2 O 5 of both coatings may inhibit bacterial growth and improve the antibacterial effect. Based on the above advantages, the TiNb–Zr–Ta serial coatings are expected to have the potential to be applied to biomedical implants.

Rare Transition Metal Doped Hydroxyapatite Coating Prepared Via Microwave Irradiation Improved Corrosion Resistance, Biocompatibility and Anti-Biofilm Property of Titanium Alloy

Development of Hydroxyapatite Coating on Titanium Alloy for Orthopedic Applications

Enhanced Corrosion Resistance and in Vitro Bioactivity of NiTi Alloys Modified with Hydroxyapatite-Containing Al2O3 Coatings

Electrohydrodynamic Deposition of Nanotitanium Doped Hydroxyapatite Coating for Medical and Dental Applications

Enhanced Corrosion Resistance and Bio-Performance of Al2O3 Coated NiTi Alloy Improved by Polydopamine-Induced Hydroxyapatite Mineralization

Biocompatibility of Hydroxyapatite Nanoparticle Coated on Titanium Surface

PREPARATION AND CHARACTERISTICS OF CO-DOPED HYDROXYAPATITE BIOMIMETIC COATINGS ON PRETREATED Ti6Al4V ALLOY

A Prospective Material for Orthopedic Applications: Ti Substrates Coated with a Composite Coating of a Titania-Nanotubes Layer and a Silver-Manganese-doped Hydroxyapatite Layer

Development of Bioactive Ceramic Coating on Titanium Alloy substrate for Biomedical Application Using Dip Coating Method

Micro-Arc Oxidation Enhances Mechanical Properties and Corrosion Resistance Of Ti-6Al-7Nb Alloy

Nanostructured Sr, Nb-Incorporated TiO2 as an Efficient Orthopedic Implant Coating with Superior Bioactivity and Corrosion Resistance

A Novel Ordered Nano Hydroxyapatite Coating Electrochemically Deposited on Titanium Substrate

Hydroxyapatite Coating on Ti-6Al-7Nb Alloy by Plasma Electrolytic Oxidation in Salt-Based Electrolyte

TEM Analysis and in Vitro and in Vivo Biological Performance of the Hydroxyapatite Crystals Rapidly Formed on the Modified Microarc Oxidation Coating Using Microwave Hydrothermal Technique

Microwave sintering of porous Ti–Nb-HA composite with high strength and enhanced bioactivity for implant applications

Stable ZnO-doped hydroxyapatite nanocoating for anti-infection and osteogenic on titanium

Biomimetic Coating of Compound Titania and Hydroxyapatite on Titanium

Preparation of Dicalcium Phosphate Anhydrous (Monetite) Biological Coating on Titanium by Spray-Drying Method

Physicochemical and biological behaviour of biogenic derived hydroxyapatite and carboxymethyl cellulose/sodium alginate biocomposite coating on Ti6Al4V alloy for biomedical applications

Preparation of Bioactive Hydroxyapatite on Pure Titanium

Mechanical, antibacterial and cytotoxic characteristics of nanolayered TiNb–Zr–Ta and nitrogen-doped TiNb–Zr–Ta coatings