Abstract:In this paper, a computational fluid dynamics (CFD) model to predict the transient temperature distributions of a prismatic lithium-ion polymer battery (LiPo) cooled by natural convection at various discharge cycles is developed. The thermal behavior of a lithium-ion (Li-ion) battery cell is important for its safety, performance and degradation, and it requires both measurement and modeling. However, most existing thermal models for Li-ion battery cells only account for steady-state temperature fields, while the exercise of a Li-ion battery cell is usually transitory. The Newman’s pseudo-2D approach was used to perform an electrochemical CFD analysis. This approach treats the porous electrode as a collection of equal-sized, isotropic, homogeneous spherical particles. This simplifies the electrode microstructure and assumes a smooth and uniform lithium insertion/extraction in the electrode. The model has been validated through variable discharge rate experimental tests in a controlled chamber. Additionally, infrared images of the battery cell during discharging are taken and the experimental numerical gradient temperature was compared. We have validated the CFD simulations by comparing the temperature, state of charge and voltage curves with experimental data. The model predictions match the experimental data very well. The difficulty in CFD battery simulations with an electrochemical approach lies in the setting of many physical parameters that are difficult to find. In this work, the parameters’ characteristics of the simulated battery are assumed and validated; these can be useful for modeling batteries of the same type. Consequently, the model developed in this work can be applied to predict the temperature distribution of the LiPo prismatic battery and can be used by the battery designers and by the designers of all systems that include batteries.

Calculation Model of Effective Thermal Conductivity of a Spiral-wound Lithium Ion Battery

Electro-Thermal Modeling of a Hollow Structure Design of Cylindrical Lithium-Ion Battery

Thermal Analysis of Spirally Wound Lithium Batteries

Measurement of Thermophysical Parameters and Thermal Modeling of 21,700 Cylindrical Battery

An Electro-Thermal Model and Its Application on a Spiral-Wound Lithium Ion Battery with Porous Current Collectors

Determination on the Inherent Thermal Conductivity and Thermal Contact Resistance of Individual Thin-Layer Materials in Li-ion Batteries

Thermal Analysis of Lithium-Ion Batteries

Experiments and modeling of anisotropic thermal conductivity of lithium-ion batteries

Study on the thermal interaction and heat dissipation of cylindrical Lithium-Ion Battery cells

Electro-thermal Modeling and Experimental Validation for Lithium Ion Battery

Thermal Design Optimization of Laminated Lithium Ion Battery Based on the Analytical Solution of Planar Temperature Distribution

Developing an electro-thermal model to determine heat generation and thermal properties in a lithium-ion battery

Thermal Modeling Approaches for a LiCoO2 Lithium-ion Battery—A Comparative Study with Experimental Validation

Influence of Uncertainty of Thermal Conductivity on Prediction Accuracy of Thermal Model of Lithium-Ion Battery

Research on Simplification of Simulating the Heat Conduction in the Lithium-Ion Battery Core

Simulating the Electrochemical-Thermal Behavior of a Prismatic Lithium-Ion Battery on the Market under Various Discharge Cycles

An analytical electrothermal model for Lithium-ion Batteries

Temperature field evolution of cylindrical battery: In-situ visualizing experiments and high fidelity internal morphology simulations

Numerical Simulation of the Combination of Novel Spiral Fin and Phase Change Material for Cylindrical Lithium-Ion Batteries in Passive Thermal Management

Thermal circuit model of prismatic lithium cell considering dynamic non-uniform characteristics during charging-discharging in energy storage

Optimization of the lumped parameter thermal model for hard-cased li-ion batteries