Abstract:Ethylene oxide production process is one of the highest energy consumers in chemical industry, and therefore even a slight improvement in its overall efficiency can have a significant impact on the sustainability of the process. Efficiency improvement can be carried out using the exergy-aided pinch analysis outlined in this paper. The overall exergy loss distribution in different unit operations of an ethylene oxide process was first evaluated and mapped out in the form of “visualized exergetic process flowsheet”. An initial analysis of the four main functional blocks of the process showed that the exothermic reaction block contained the largest exergy loss (6043 and 428 kJ/kg of internal and external losses, respectively) which can be reduced by isothermal mixing, as well as increasing reaction temperature and reduction in pressure drop. The absorption block was also estimated to have the second highest contribution with total exergy losses of 3640 kJ/kg which were mainly due to the cooling column. These losses were then recommended to be reduced by improvements in the concentration and temperature gradients along the tower. Following the block-wise analysis, exergy analysis was then carried out for individual unit operations in each block to pinpoint the main sources of thermal exergetic inefficiency. Thermal solutions to reduce losses were also proposed in accordance with the identified sources of inefficiency, leading to a comprehensive list of cold and hot process streams that could be introduced to reduce losses. Finally, pinch analysis was brought into action to estimate the minimum energy requirements, to select utilities, and to design heat exchanger network. Thus, the methodology used in this work took advantage of both exergy and pinch analyses. The combined thermal-exergy-based pinch approach helped to set energy targets so that all the thermal possible solutions supported by exergy analysis were considered, preventing exclusion of any hot or cold process stream with high potential for heat integration during pinch analysis. Results indicated that the minimum cold utility requirement could be reduced from 601.64 MW (obtained via conventional pinch analysis) to 577.82 MW through screening of streams by the combined methodology.

Thermal and exergoeconomic analysis of a dairy food processing plant

Energy and exergy analysis of a milk powder production system

Thermodynamic and exergoeconomic analyses of two-stage spray drying plant for skim milk powder production

Exergy analysis and boiler efficiency enhancement of a dairy plant for milk and derivative production

Process and utility systems integration and optimisation for ultra-low energy milk powder production

Energy, exergy and exergoeconomic analyses of single stage spray drying plant in the northern region of India for skim milk powder production

Modelling and control of plate heat exchanger with continuous high-temperature short time milk pasteurization process – A review

Estimation of thermodynamic and enviroeconomic characteristics of khoa (milk food) production unit

Thermal performance evaluation of an indigenously designed small-scale solar parabolic trough collector for manufacturing Indian milk products

Non-Thermal Milk and Milk Products Processing

Thermoeconomic Analysis of a Solar-Assisted Industrial Process Heating System

Novel Beverage Heating and Fast-Cooling Processes Separately Using an Absorption Chiller and Using Electric Heat Pumps

Techno-Economic and Environmental Assessment of Dairy Products: A Case Study in Southeast Idaho, USA

Energy Consumption Analysis and Management Strategies for the Dairy Farm in India Towards Sustainable Development

Application of Renewable Solar Energy for Thermal Treatment of Milk: A Review

Dairy Wastewater as a Potential Feedstock for Valuable Production with Concurrent Wastewater Treatment through Microbial Electrochemical Technologies

Thermodynamic evaluation of shell and tube heat exchanger through advanced exergy analysis

From fluid milk to milk powder: Energy use and energy efficiency in the European dairy industry

Combined pinch and exergy analysis of an ethylene oxide production process to boost energy efficiency toward environmental sustainability

Comprehensive analysis of a high temperature solar powered trigeneration system: An energy, exergy, and exergo-environmental (3E) assessment

Energy and Exergy Analysis of Biogas-Powered Power Plant from Anaerobic Co-Digestion of Food and Animal Waste