Abstract:Aluminium Matrix Composites reinforced with ceramic particles (e.g. SiC, Al2O3, graphite and fly ash) are actually advanced engineering materials. These materials can be characterised by superior mechanical and thermal properties. However, the addition of the reinforcement particles could significantly changing corrosion behaviour of aluminium matrix composites. The corrosion resistance of aluminium matrix composites is determined by several factors such as: variety of aluminium alloy matrix and reinforcement type combinations, manufacturing technology, microstructure of composite and interfacial reactions reinforcement/matrix. This paper presents microstructural characteristic and susceptibility to pitting corrosion of on aluminium-based metal matrix (Al-Si) composites reinforced with graphite (5.7 wt. %), SiC (20 vol. %) and fly ash (9.0 wt. %) particles. The corrosion resistance experiments were carried out by accelerated electrochemical studies using the potentiodynamic method (in the 3.5 wt. % NaCl aqueous solution, pH 7.0, at 25oC). The corrosion behaviour of composite with fly ash particles was studied further by immersion tests for 50 days (3.5 wt. % NaCl). The polarisation curves, corrosion potentials (corrosion Ecorr, pitting Epit and repassivation Erp) and surface morphology after corrosion tests were estimated. It was found that: (1) the electrochemical data and microstructure observations after corrosion tests confirms that incorporation of reinforcement particles (graphite, SiC, fly ash) into aluminium matrix causes the increase of susceptibility to pitting corrosion of the composites in comparison with unreinforced matrix alloys, (2) the enhanced pitting corrosion of Al/fly ash, Al/SiC and Al/GR composites is associated with the pores, multiphasic character of composites (e.g. the releases of intermetallic Al3Ni phase), reactions at the interface reinforcement/matrix and formation of galvanic couples favourable to corrosion. The same factors also determine the properties of oxide film forming on the materials surface.

Mathematical modeling of the corrosion response of aluminium 5052/tungsten carbide/graphite hybrid composite

Fabrication, Surface Morphology and Corrosion Investigation of Al 7075-Al2O3 Matrix Composite in Sea Water and Industrial Environment

Exploring tribological properties in the design and manufacturing of metal matrix composites: an investigation into the AL6061-SiC-fly ASH alloy fabricated via stir casting process

Effects of Silicon Carbide and Tungsten Carbide in Aluminium Metal Matrix Composites

Corrosion Resistance of Al-CNT Metal Matrix Composites

Synthesis and Experimental Investigations of Tribological and Corrosion Performance of AZ61 Magnesium Alloy Hybrid Composites

Evaluation of Mechanical and Thermal Properties of Aluminium-7475 Reinforced with Graphite and Fly ash

Mathematical Modeling of Wear Characteristics of 6061 Al-Alloy-SiCp Composite Using Response Surface Methodology

A Systematic Review on the Mechanical, Tribological, and Corrosion Properties of Al 7075 Metal Matrix Composites Fabricated through Stir Casting Process

Enhanced mechanical and tribological properties of ultrasonically assisted stir-cast AA7075 metal matrix composites in challenging corrosive environments

Corrosion studies on aluminium-based metal matrix composites reinforced with graphite, SiC and fly ash particles

Studies on the corrosion resistance of Al7075 / SiC metal matrix composites in an alkaline environment

Mathematical Modeling and Analysis of Tribological Properties of AA6063 Aluminum Alloy Reinforced with Fly Ash by Using Response Surface Methodology

Investigation on Mechanical Behavior of Al6061- Coconut Shell Ash- Granite Dust Reinforced Hybrid Metal Matrix Composites Manufactured using Stir Casting Technique

Evaluation of mechanical and thermal properties of Al 7475–CSA–graphite hybrid metal matrix composites

Corrosion-resistant aluminum alloy design through machine learning combined with high-throughput calculations

High temperature corrosion study on CVD-MWCNT reinforced aluminium nanocomposites

Experimental Investigation and Comparative Analysis of Aluminium Hybrid Metal Matrix Composites Reinforced with Silicon Nitride, Eggshell and Magnesium

Mechanical Behaviour and Fractured Surface Analysis of Bauxite Residue and Graphite Reinforced Aluminium Hybrid Composites

Mechanical and wear analysis of AA6061-T6-SiC-TiC-graphite metal matrix composite

Performance analysis and mechanical behavior of aluminum metal matrix composite