Abstract:Carbon dioxide capture and storage (CCS) is a necessary requirement for high-emitting CO2 industries to significantly reduce volumes of greenhouse gases released into the atmosphere and mitigate climate change. Geological CO2 storage into depleted oil and gas fields is the fastest and most accessible option for CCS deployment allowing for re-purposing existing infrastructures and utilizing significant knowledge about the subsurface acquired during field production operations. The location of such depleted fields in the neighborhoods of high-emitting CO2 industries is an additional advantage of matured on-shore European fields. Considering these advantages, oil and gas operators are now evaluating different possibilities for CO2 sequestration projects for the fields approaching end of production. This article describes an integrated approach to reservoir simulations focused on evaluating a CO2 injection pilot at one of these matured fields operated by MND and located in the Czech Republic. The CO2 injection site in focus is a naturally fractured carbonate reservoir. This oil-bearing formation has a gas cap and connection to a limited aquifer and was produced mainly by pressure depletion with limited pressure support from water injection. The article summarizes the results of the efforts made by the multi-disciplinary team. An integrated approach was developed starting from geological modeling of a naturally fractured reservoir, integrating the results of laboratory studies and their interpretations (geomechanics and geochemistry), dynamic field data analysis (pressure transient analysis, including time-lapse) and history matching reservoir model enabling simulation of the pilot CO2 injection. The laboratory studies and field data analysis provided descriptions of stress-sensitive fracture properties and safe injection envelope preventing induced fracturing. The impact of potential salt precipitation in the near wellbore area was also included. These effects are considered in the context of a pilot CO2 injection and addressed in the reservoir simulations of injection scenarios. Single-porosity and permeability reservoir simulations with a dominating fracture flow and black-oil formulation with CO2 simulated as a solvent were performed in this study. The arguments for the choice of the simulation approach for the site in focus are shortly discussed. The reservoir simulations indicated a larger site injection capacity than that required for the pilot injection, and gravity-driven CO2 migration pathway towards the gas cap in the reservoir. The application of the approach to the site in focus also revealed large uncertainties, related to fracture description and geomechanical evaluations, resulting in an uncertain safe injection envelope. These uncertainties should be addressed in further studies in preparation for the pilot. The article concludes with an overview of the outcomes of the integrated approach and its application to the field in focus, including a discussion of the issues and uncertainties revealed.

Numerical Simulations of Carbon Dioxide Storage in Selected Geological Structures in North-Western Poland

An Assessment of the Formations and Structures Suitable for Safe CO2 Geological Storage in the Upper Silesia Coal Basin in Poland in the Context of the Regulation Relating to the CCS

Hydromechanical Impacts of CO2 Storage in Coal Seams of the Upper Silesian Coal Basin (Poland)

Laboratory Experiments and Geochemical Modeling of Gas–Water–Rock Interactions for a CO2 Storage Pilot Project in a Carbonate Reservoir in the Czech Republic

Field-based simulation of a demonstration site for carbon dioxide sequestration in low-permeability saline aquifers in the Ordos Basin, China

A modeling and numerical simulation study of enhanced CO2 sequestration into deep saline formation: a strategy towards climate change mitigation

Carbon Dioxide Sequestration in Low Porosity and Permeability Deep Saline Aquifer: Numerical Simulation Method

A Numerical Model for Evaluating the Long-Term Migration and Phase Transition Behavior of Foam-Assisted Injection of CO2 in Saline Aquifers

CO2 Injection via a Horizontal Well into the Coal Seam at the Experimental Mine Barbara in Poland

Numerical Simulation Study on Underground Gas Storage with Cushion Gas Partially Replaced with Carbon Dioxide

The effect of site characterization data on injection capacity and cap rock integrity modeling during carbon dioxide storage in the Nisku saline aquifer at the Wabamun Lake area, Canada

Geological and geomechanical conditions of depth location and effective capacity of natural gas storage caverns in polish salt domes

Simulation of the Microscopic Seepage Process of CO 2 Storage in Saline Aquifers at the Pore Scale

Numerical Modelling of CO2 Injection and Storage in Low Porosity and Low Permeability Saline Aquifers: A Design for the Permian Shiqianfeng Formation in the Yulin Area, Ordos Basin

A study of methodologies for CO2 storage capacity estimation of saline aquifers

Numerical Simulation of CO2 Migration and Geochemical Reactions in Shihezi Formation Caprock, China

Modelling CO2-induced fluid–rock interactions in the Altensalzwedel gas reservoir. Part I: from experimental data to a reference geochemical model

Analysis of dynamic characteristics and influencing factors of CO2 low-permeability coal reservoir sequestration

Monitoring geological storage of CO2 using a new rock physics model

Integrated Approach to Reservoir Simulations for Evaluating Pilot CO2 Injection in a Depleted Naturally Fractured Oil Field On-Shore Europe