Abstract:A two-step optimization method is proposed to design a compact single-surface far-field illumination system, satisfying the requirements of illuminance uniformity and light control efficiency with h/D less than 3:1. In the first step, the conventional tailored edge-ray design (TED) method is employed to generate prescribed illumination distribution for the rotationally symmetric optical system, and an optimization process is added to reach a balance between illuminance uniformity and light control efficiency. Based on the improved TED method, we can construct an initial optical system more accurate than that obtained by point source assumption. In the second step, an iterative feedback modification process is employed to optimize the initial optical system, so that the degradation of performance due to insufficient control of skew rays is mitigated. Because the initial optical system constructed in the first step is accurate enough, the second-step feedback modification can converge to a satisfactory result within several iterations. As an example, a free-form rotationally symmetric lens with the height of h = 25 mm is designed for a discoidal LED source with the diameter of D = 10 mm. Both high illuminance uniformity of 0.75 and high light control efficiency of 0.86 are obtained simultaneously. The method can be further used to achieve more complex non-uniform illumination distributions. The design of an optical system with h/D = 2.5:1 and a circular linear illumination distribution is demonstrated.

A Practical Method to Design Reflector-Based Light-Emitting Diode Luminaire for General Lighting

Optical Design in Packaging and Illuminating System for High Power Light-Emitting Diodes for Projection System

Freeform Lens Design for LED Illmination

The Method of Reflective Fly Eye Lens Design for LED Illuminating Projection System

Secondary Optical Design for LED Illumination Using Freeform Lens

Freeform Led Lens For Uniform Illumination

Freeform Surface Lens for LED Uniform Illumination.

The Freeform Reflector for Uniform Rectangular Illumination

Secondary light distribution design for LED street light

Optimized Design of LED Freeform Lens for Uniform Circular Illumination

Direct Design of Thin and High-Quality Direct-Lit LED Backlight Systems

53.2: An Optimization Design Method of LED Freeform Lens for Uniform Circular Illumination

Freeform Surface Lens Design for Uniform Illumination

Design of LED-based Reflector-Array Module for Specific Illuminance Distribution

Ray Targeting for Optimizing Smooth Freeform Surfaces for Led Non-Rotational Illumination

LED Illumination Design Based on Lambertian Reflection of Micro-structure

Reflector Design for Large-Size Spherical Surface Sources

Design of A Hybrid Luminaire Based on Reflector and Lens Composite Structure

The design of the freeform reflector for uniform illumination

Optical Design of Adjustable Light Emitting Diode for Different Lighting Requirements

A Two-Step Design Method for High Compact Rotationally Symmetric Optical System for LED Surface Light Source.