Abstract:The application of a robot manipulator to the task of parts assembling or collaboration with human workers requires compliant control and intrinsic safety. As a result, it is necessary to exert accurate torque on each joint of the robot through torque sensing and implementing closed-loop joint torque control. This torque servo system is required to track reference torque signals while operating under the influence of motor friction, flexibility of the harmonic drive, noise from the sensor, robot dynamics modelling error and other unknown certainties, resulting in large control efforts. This paper focuses on providing better compliance control for collaborative robots and proposes a joint torque controller design under development with active disturbance rejection concept. The controller is designed through a novel extended state observer to estimate and compensate for the unmodelled dynamics of the system, nonlinearly variable motor friction, and other uncertainties. Then, a simple proportional differential controller is designed to produce control law. In spite of the remarkable performance in dealing with the mechanical dynamics of the joint actuator, the original controller does not work well with the electrical factor of the joint actuator due to the limited current loop bandwidth in the hardware of motor and driver. To eliminate the detrimental effect of the time delay in current servo, a predictive output method based on a nonlinear tracking differentiator (TD) is used to improve the controller within the framework of active disturbance rejection control. Both simulations and experiments are conducted on a prototype one degree of freedom manipulator with a joint torque sensor. The results demonstrate the enhancement of both the system stability and disturbance rejection performances. Based on the proper treatment of actuator delay, the dominant effect of the motor friction and the flexibility of the harmonic drive has been reduced to insignificance. Moreover, the proposed controller is easy to implement because the explicit dynamic model of the system is not required.

Collaborative robot zero moment control for direct teaching based on self-measured gravity and friction

An Accurate On-Line Correction Strategy For Gravity Compensation Aiming At Teaching By Touch Of Collaborative Robots

Resolved-momentum-based real-time balance control for high-speed arm manipulation of humanoid robot

Robot joint friction compensation learning enhanced by 6D virtual sensor

Research on Gravity Compensation in Motion Control of Multi-joint Robot

Direct Teaching of Industrial Manipulators Using Current Sensors

LADRC-based Sensorless Force Control for Robotic Joint Considering Static Friction

Learning-model-based Control for Robot Manipulators Sensorless Kinesthetic Teaching Using Sparse Feature Dynamics

Force-free Control of Low Drag Resistance for Humanoid Robot Joint

Sensorless Human-Robot Collaborative Assembly Considering Load and Friction Compensation

A Sensorless Hand Guiding Scheme Based on Model Identification and Control for Industrial Robot

A Gravity Compensation Algorithm of Robot Manipulator Control based on the Trigonometric Function

Control And Modeling For Direct Teaching Of Industrial Articulated Robotic Arms

Joint Torque Control of a Collaborative Robot Based on Active Disturbance Rejection with the Consideration of Actuator Delay

A Novel Virtual Sensor for Estimating Robot Joint Total Friction Based on Total Momentum

Impedance Control of Collaborative Robots Based on Joint Torque Servo with Active Disturbance Rejection.

Compliance Control for Robot Manipulation in Contact with a Varied Environment Based on a New Joint Torque Controller

Gravity compensation algorithm for hybrid master manipulator

Force-free Control for the Flexible-Joint Robot in Human-Robot Interaction

An active force positioning control strategy for the minimally invasive surgical manipulator

A New Method For Sensorless Collision Detection On The Servo Level