Abstract:_ Shaped cutters are not new to the industry. They were introduced decades ago when drilling environments began to change and more complex formations introduced new challenges, and they have been part of drill-bit technology portfolios since the 1990s. For many years, development teams have been investigating downhole conditions that were causing cutter damage and drilling dysfunctions, continually playing with the balance between materials and geometry. That knowledge has been a springboard for focused R&D efforts to improve cutter designs to contend with demanding drilling conditions and more complex wellbores. Today, shaped cutters push performance to new limits in applications that traverse multiple formations on a single run, from interbedded, to hard rock and abrasive formations, through sand, clay, sandstone, and limestone. Developing Shaped-Cutter Technology An entire suite of shaped cutters (Fig. 1) has been developed using the latest in materials research to address a range of challenging formation types and applications. Drilling engineers can place combinations of specialized cutters on a single bit to drill efficiently through complex formations. One of the advanced cutters (Fig. 1a) that emerged from these development efforts is a design that improves performance in hard formations. The resulting cutter has novel edge geometry to stand up to high-impact loads and a secondary chamfer on the diamond face that enables it to withstand higher loads than polycrystalline diamond compact (PDC) cutters. This allows it to maintain drilling efficiency in hard, interbedded formations, leading to a higher overall rate of penetration (ROP) for the interval. When drilling in hard, abrasive formations, heat generated from the rock-cutter interaction can break down the integrity of the cutter, leading to premature wear and reduced performance. Engineers focused on enhancing the improved cutter tip to develop a cutter (Fig. 1b) that remains cool in hard, abrasive formations and is particularly effective in sandstone, where it exhibits considerably less microfracturing and wear than traditional cutters. Complex runs often mean that bits must drill through very different formations, from interbedded, hard rock to more abrasive formations. To contend with these varying conditions, a cutter must be effective in high-impact loading conditions and still be functional at end of run. Another specialized cutter (Fig. 1c) was developed to deliver this balanced performance, reducing friction and heat generation at cutter/rock interface, breaking up rock cuttings, and enabling faster drilling and longer runs with a lower weight on bit (WOB) requirement for a given ROP. Conditions where point loading is required, such as drilling through evaporites or high-mud-weight environments and in drilling runs where WOB is limited, require a cutter with the ability to distribute more weight to a smaller portion of the rock. Baker Hughes designed a cutter (Fig. 1d) for these conditions that penetrates the formation more effectively than standard cutters by generating a larger depth of cut using the energy available to deliver faster drilling runs. The most recent addition (Fig. 1e) to the specialized cutter portfolio takes on even more demanding conditions with a design that delivers greater durability with the inclusion of secondary chamfering, a relief in the center of the cutter, and enhanced point-loading capability.

Breakthrough in Milling Technology for Sidetracking Corrosion-Resistant Alloy Casing/Liner Applications with 28% Chrome Content - A Successful Case Study

ERD Record in Shallow Weakly Consolidated Formation with Remarkable Efficiency

Installing Highly Alloyed Corrosion-Resistant Alloy 25% Chrome Tubing with Dope-Free Connections in Triple Joint Stands to Reduce Running in Hole Time in an Offshore Field

Double Casing Exit for Side-Track to Commingle Two Borehole Sizes Based Sections in One Slim Shot to Well TD

Drilling Efficiently, Durably and Consistently Through Cherts and Conglomerates with PDC Bits is Possible

Merging Buoyancy Technology and Low Friction Centralizers in Deploying a Long 9-5/8" Casing String: Case History of an Ultra Extended Reach Well

Structural design and mathematical cutting model of hydraulic section milling for high-strength casings in small wellbores

Delivering Best in Class ROP Performance by Pushing the Operational Envelope with Novel Advanced Bit Designs

Research and Application of Windowing for High-Grade Steel Thick-Wall Casing in Ultradeep Wells

Feasibility Verification of Casing Drilling in Shallow Marine Formations

Successful Barrier Enhancement Application of Epoxy Based Resin for Multiple Casing to Casing Annuli Having Tight Injectivity - Case Study from Saudi Arabian Peninsula

Development of a hardbanding material for drill pipes based on high-manganese steel reinforced with complex carbides

Casing and Cement Evaluation on Drillpipe: New Tool Acquires Well Integrity Data in Parallel with Existing Drillpipe Deplyed Operations from Drilling to Plug and Abandonment

Case Study: Drilling at the Cutting Edge of Performance With Shaped-Cutter Technology

Hybrid Drill Bit Technology on Performance Motor Bottom Hole Assembly Yields Breakthrough Drilling Performance in Kuwait

Optimum Design of Large-Diameter Reverse Circulation Drill Bit for Drilling Rescue Wells Using Orthogonal Experimental Method and CFD Simulation

Liners with Bulk Metallic Glass/High Entropy Alloy, Degradable in Formation Fluids for a Skin Free, Clear, Perforating Tunnel, Enabling Enhanced Reservoir Connectivity

Development and Field Testing of a Novel Multifunctional Drilling Enhancement Tool in a Middle East Field

New Cement Evaluation Technology Enables Successful Casing Retrieval and Well Abandonment: A Case Study from Southeast Asia

Use of Mixed-Metal Oxide Water-Based Drilling Fluid System Increased Drilling Performance and Eliminated Mud Losses

Feasibility Study on Optimisation of Material Selection for High Temperature Sour Gas Producer