Abstract:On the basis of the advantages of ideal cycling stability, high discharge voltage (1.65 V), and excellent reversibility, more and more attention has been focused on TiNb2O7 (marked as TNO) as an anode material candidate for lithium-ion batteries. However, the poor electronic conductivity and low ionic diffusion rate intrinsically restrict its practical use. Herein, we first synthesize the TNO/C composite microspheres with three-dimensionally (marked as 3D) electro-conductive carbon network and abundant nanoporous structure by a simple spray-drying method. The microspheres are constructed by irregularly primary cubic nanoparticle units with size of 100-200 nm. The nanopores throughout the microspheres range from 1 to 50 nm. As an anode material, the prepared TNO/C composite microspheres demonstrate a prominent charge/discharge capacity of 323.2/326 mA h g(-1) after 300 cycles at 0.25 C (1 C = 388 mA g(-1)) and 259.9/262.5 mA h g(-1) after 1000 long cycles at a high current density of 5 C, revealing the ideal reversible capacity and long cycling life. Meanwhile, the TNO/C composite microspheres present ideal rate performance, showing the discharge capacity of 120 mA h g(-1) at 30 C after 10 cycles. The super electrochemical performance could be attributed to the 3D electro-conductive carbon network and nanoporous structure. The nanopores facilitate the permeation of electrolyte into the intercontacting regions of the anode materials. Carbon layers disperse uniformly throughout the 3D microspheres, effectively improving the electrical conductivity of the electrode. Hence, the prepared TNO/C composite microspheres have great potential to be used as an anode material for lithium-ion batteries.

TiNb2O7/carbon nanotube composites as long cycle life anode for sodium-ion batteries

Nanoporous TiNb2O7/C Composite Microspheres with Three-Dimensional Conductive Network for Long-Cycle-Life and High-Rate-Capability Anode Materials for Lithium-Ion Batteries

Intertwined Nitrogen‐Doped Carbon Nanotubes for High‐Rate and Long‐Life Sodium‐Ion Battery Anodes

Carbon Coated Sodium-Titanate Nanotube As an Advanced Intercalation Anode Material for Sodium-Ion Batteries

N-doped Carbon Coated TiO2 Hollow Spheres As Ultralong-Cycle-life Na-ion Battery Anodes

Electrospun Bi-doped TiO2/C nanofibers as active materials for high-capacity and long-life-stability sodium-ion anodes

N-doped carbon-coated interconnected TiNb2O7 hollow nanospheres as advanced anodes for lithium-ion batteries

Nano-TiNb2O7/carbon Nanotubes Composite Anode for Enhanced Lithium-Ion Storage

Conductivity Optimization Via Intertwined CNTs Between TiNb2O7@C Microspheres for a Superior Performance Li-ion Battery Anode.

Nitrogen-doped carbon decorated TiO2/Ti3C2T MXene composites as anode material for high-performance sodium-ion batteries

Ni2+-Dopedna2ti6o13 Nanotubes to Enhance the Electrochemical Performance of Sodium Ion Batteries

Mesoporous TiNb2O7 Microspheres As High Performance Anode Materials for Lithium-Ion Batteries with High-Rate Capability and Long Cycle-Life

PPy-derived Carbon Nanoparticles Anchored on TiO2/C Nanofibers As Sodium-Ion Battery Anodes with Ultra-Long Cycle Stability

Establish TiNb2O7@C as Fast-Charging Anode for Lithium-Ion Batteries

NiSe2 nanoparticles encapsulated in CNTs covered and N-doped TiN/carbon nanofibers as a binder-free anode for advanced sodium-ion batteries

Double-Nanocarbon Synergistically Modified Na3V2(PO4)3: an Advanced Cathode for High-Rate and Long-Life Sodium-Ion Batteries.

A novel TiO2 nanoparticle-decorated helical carbon nanofiber composite as an anode material for sodium-ion batteries

N-doped Carbon Coated Anatase TiO2 Nanoparticles As Superior Na-ion Battery Anodes.

TiCr0.5Nb10.5O29/CNTs nanocomposite as an advanced anode material for high-performance Li+-ion storage

3D nitrogen and sulfur equilibrium co-doping hollow carbon nanosheets as Na-ion battery anode with ultralong cycle life and superior rate capability

Dual carbon decorated Na3TiMn(PO4)3 as an advanced cathode for sodium-ion batteries