Abstract:Bare LiNi0.6Co0.2Mn0.2O2 (NCM) suffers not only fast chemical degradation but also mechanical degradation represented by heterogeneous pore generation in composite cathodes for sulfide solid‐state batteries. NCM covered by lithium difluorobis(oxalato)phosphate exhibits mitigated chemical degradation kinetics after the formation of a uniform artificial cathode electrolyte interphase layer during electrochemical charging. In addition, intertwined chemical‐mechanical degradation is suppressed at the cathode interface by evolving relatively homogeneous pores. Keeping both the chemical and physical state of the electrode–electrolyte interface intact is one of the greatest challenges in achieving solid‐state batteries (SSBs) with longer cycle lives. Herein, the use of organic electrolyte additives in the cathode electrolyte interphase (CEI) layer to mitigate the intertwined chemical and mechanical degradation in sulfide‐based SSBs is demonstrated. Lithium difluorobis(oxalato)phosphate (LiDFBOP) and argyrodite (Li6PS5Cl) are used as a model system, with the LiDFBOP‐derived CEI layer induced by irreversible oxidation above 4.12 V (vs Li+/Li) during the formation cycle exhibiting dual functions. This CEI layer retards the rate of chemical degradation between the cathode active particles and solid electrolytes at high charging potential and helps maintain intimate physical contact even at a low stack pressure of 0.75 MPa. The improved physical contact enables delivery of a high initial capacity, while chemical stability suppressing the sulfite or sulfate formation has a more dominant effect on the long‐term cycle stability. This study presents a new perspective and strategies for designing cathode coating materials for sulfide‐based SSBs beyond the typically used inorganic oxide materials.

Unveiling and Alleviating Chemical “Crosstalk” of Succinonitrile Molecules in Hierarchical Electrolyte for High‐Voltage Solid‐State Lithium Metal Batteries

A Dynamically Stable Sulfide Electrolyte Architecture for High-Performance All-Solid-State Lithium Metal Batteries

In-situ Fabricated Succinonitrile-Based Composite Electrolyte for High-Performance and Safe Solid-State Lithium Batteries

Ternary Stabilization Strategies for Succinonitrile-Based in Situ Polymerized Electrolyte Enabling High-Performance Solid Lithium Metal Batteries

A Plastic-Crystal Electrolyte Layer Promotes Interfacial Stability of Ni-Rich Oxide Cathode in Li6PS5Cl-Based All-Solid-State Rechargeable Li Batteries

Concentration induced modulation of solvation structure for efficient lithium metal battery by regulating energy level of LUMO orbital

Constructing a Lithiophilic and Mixed Conductive Interphase Layer in Electrolyte with Dual-Anion Solvation Sheath for Stable Lithium Metal Anode

Stabilizing Li4SnS4 Electrolyte from Interface to Bulk Phase with a Gradient Lithium Iodide/Polymer Layer in Lithium Metal Batteries

An artificial layer enables in situ generation of a homogeneous inorganic/organic composite solid electrolyte interphase for stable lithium metal batteries

Domain-Limited Laminar Lithium Deposition Behavior Mediated by the Design of Hybrid Anode for Sulfide-Based All-Solid-State Batteries

Organic‐Additive‐Derived Cathode Electrolyte Interphase Layer Mitigating Intertwined Chemical and Mechanical Degradation for Sulfide‐Based Solid‐State Batteries

Crystalline Electrolyte Boosts High Performance of All-Solid-State Lithium-Ion Batteries

Succinonitrile-Lithium Salt Complexes as Solid Catholytes for LLZO-Based Solid-State Batteries

Interfacial Stabilization by Prelithiated Trithiocyanuric Acid as an Organic Additive in Sulfide‐based All‐Solid‐State Lithium Metal Batteries

Sulfone-Based Electrolytes for Highly-Efficient and Stable Lithium Metal Anode

Novel Quasi Solid-State Succinonitrile-based Electrolyte with Low-flammability for Lithium-ion Battery

Making Plasticized Polymer Electrolytes Stable Against Sodium Metal for High‐Energy Solid‐State Sodium Batteries

Synchronously Stabilizing the Interphase of Cathode and Anode Enabling Lithium Metal Batteries via Multiple Electrolyte Additives

Li2S5-based Ternary-Salt Electrolyte for Robust Lithium Metal Anode

High-performance lithium metal batteries with ultraconformal interfacial contacts of quasi-solid electrolyte to electrodes

Tailoring the Spatial Distribution and Content of Inorganic Nitrides in Solid–Electrolyte Interphases for the Stable Li Anode in Li–S Batteries