Abstract:Abstract The paper describes the results of the first multistage hydraulic fracturing operations in Russia on the Caspian Sea shelf in the gas condensate and oil deposits of the Aptian formation of V. Filanovsky field. In addition to the small productive formation depth, long horizontal sections with a complex trajectory and high collapse gradients due to large zenith angles when passing the Albian and Aptian deposits of poorly consolidated sandstones are an additional challenge for choosing a multistage hydraulic fracturing assembly. The above features require the use of modern sand control screens with enhanced frac sleeves. A design was developed which includes frac sleeves and sand control screens that can withstand multiple cycles of hydraulic impact during hydraulic fracturing, as well as many opening/closing cycles. A seawater-based frac fluid system was applied. The frac fleet was located on a pontoon, the coiled tubing – on a platform. For the first time in Russia, a 2-5/8 inch coiled tubing with a complex-type friction reducing system was used to switch coupling/sleeves in conditions of very long horizontal sections, complex trajectories, and high friction coefficients. The minimum distances between the screen's sliding sleeves and frac sleeves did not prevent from performing manipulations in complex environment. For well cleaning, the frac assemblies of reverse rotary-pulse and rotary-directional types were used. At the first stage of the project, the development of an optimal method of well completion was successfully implemented. Due to the close interaction of the operating company, service company, and science & engineering team of the operator, for the first time in Russia the design of downhole equipment with the use of advanced technologies of sand control screens, frac sleeves was presented. This solution has proved its effectiveness – the downhole equipment has retained its operational properties after a long period of well operation and further in the process of hydraulic fracturing. At the second stage of the project, 32 MSHF operations were performed at four wells. To reduce nonproductive time and operational risks, a satellite communication complex was additionally deployed on the pontoon to join the engineering centers of Astrakhan, Moscow, and Houston. After finishing the well development, the design indicators for formation fluid rates were achieved, which proved the effectiveness of the stimulation of the field's target objects – this opens great prospects for further development of low-permeability reservoirs at offshore sites in the Caspian Sea. The successful project implementation and the achievement of the design values of oil flow rates has expanded the possibilities of commercial operation of the low-permeable Aptian formation, complicated by the presence of a gas cap and underlying water. A solution was presented for working in extended horizontal well sections with 2-5/8 inch coiled tubing together with a complex-type mechanical friction reducing system. The economic effect was achieved when solving tasks of manipulating mechanical screen couplings and frac port sleeves without the involvement of downhole tractors. The use of new solutions in the completion assembly made it possible to eliminate additional sand ingress problems.

IMPROVEMENT OF OIL RECOVERY OF THE FLOODED LAYERS AT FORMATION HYDRAULIC FRACTURING

METHOD FOR RESERVOIR OIL RECOVERY IMPROVEMENT AT PLANNING THE FORMATION HYDRAULIC FRACTURING WITH USEOF A PACKER ASSEMBLY

Experience in conducting multi-zone hydraulic fracturing on the oilfield of PJSC «Tatneft»

First Multistage Hydraulic Fracturing in Russian Offshore: Integrated Approach to Completion and Stimulation of Apt Deposits of V.Filanovsky Field

Visualization of reservoir fluid filtration characteristics distribution, as a method of oil field development management

Experience of applying the shock wave impact method for the bottomhole zone

Maximizing oil recovery: Innovative chemical EOR solutions for residual oil mobilization in Kazakhstan's waterflooded sandstone oilfield

Simulation study of water shut-off treatment for heterogeneous layered oil reservoirs

Oil Production Enhancement by EOR Candidates Optimization

Experimental Study on the Efficiency of Fracturing Integrated with Flooding by Slickwater in Tight Sandstone Reservoirs

Problems and methods of hydraulic fracturing in multilayered oil reservoirs with the continuous perforation

Physical and numerical simulation of inter-fracture flooding in heterogeneous tight oil reservoirs

ANALYSIS OF OIL RESERVES PRODUCTION AT THE BP8 DEVELOPMENT OBJECT OF THE TARASOVSKOYE OIL AND GAS CONDENSATE FIELD

Choosing the optimal strategy for residual hard-to-recover oil reserves confined to low-permeability heterogeneous reservoirs extracting

Evaluation of enhanced oil recovery efficiency at fields with hard-to-recover reserves

Probabilistic assessment of the effectiveness of the application of cyclic flooding of oil reservoirs method

Comprehensive assessment of hydraulic fracturing technology efficiency for well construction during hydrocarbon production

Combining Thermal Effect and Mobility Control Mechanism to Reduce Water Cut in a Sandstone Reservoir in Kazakhstan

A simulation study on hydrogel performance for enhanced oil recovery using phase-field method

The mechanism of hydraulic fracturing assisted oil displacement to enhance oil recovery in low and medium permeability reservoirs

Development of oil extraction screening methodology taking into account innovative methods using the example of the Ukrainian field