Abstract:Latent heat storage is one of the most efficient ways of storing thermal energy. Organic phase change materials are latent heat storage materials and they have been widely used as suitable materials for thermal energy storage applications due to their high latent heat and small temperature difference between storing and releasing heat. In this thesis, micro- and nano- scaled phase change materials were fabricated for thermal energy storage. A novel microencapsulated phase change material slurry (MPCS) was introduced by dispersing microencapsulated phase change materials (MEPCMs) into water with an amount of surfactants and its thermal and rheological properties were also investigated. The results showed that MPCS fabricated in the current research are suitable for potential application as heat transfer media in the thermal energy storage. A new methodology was proposed to investigate the heat transfer characteristics of MPCSs. Experiments were carried out in laminar, transition and turbulent flow for MPCSs in a circular tube under constant heat flux, respectively. The experimental results demonstrated that in comparison to water as a heat transfer fluid at the same flow rate, the heat transfer of 10 wt. % MPCS could be enhanced by 10 % in transition flow condition while the PCM particles were in solid/liquid state, and the heat transfer of 5 wt. % MPCS could be enhanced by 21.9 % and 19.2 % in turbulent flow condition while the PCMs are in solid and solid/liquid states, respectively. Nevertheless, the heat transfer enhancement depends on the combination factors, including concentration of the slurry and flow rate of the slurry. A novel heat transfer fluid containing microencapsulated phase change material and multi-walled carbon nanotubes was prepared. The results showed that addition of MWCNTs to microencapsulated phase change material slurry can effectively improve the thermal conductivity of suspensions and it is also found that a blend of 10 wt. % MEPCM and 1 wt. % MWCNTs suspension can achieve the best thermal performance and stability among other blends in the experiment. A novel nanocapsule containing n-octadecane with an average 50 nm thick shell of poly (ethyl methacrylate) (PEMA), and with a core/shell weight ratio of 80/20 was synthesized by direct miniemulsion method. The results showed that PEMA/octadecane nanocapsule had good thermo-physical properties and had much higher encapsulation ratio (89.5%) and encapsulation efficiency (88.9%). For the first time, a novel PCM nanoparticle suspension (nano-PCS) was synthesized by direct miniemulsion method for thermal energy system application. It was found that the nano-PCSs had good thermo-physical properties and durability. All nano-PCSs presented narrow size distribution and stable particles. In comparison to the convectional PCM emulsion and MPCS, the nano-PCS tends to be more stable and is much easier and cheaper to fabricate in terms of the method and materials used, however, the heat transfer characteristics of the nano-PCS require further experimental investigation

Size controlled lauric acid/silicon dioxide nanocapsules for thermal energy storage

Unconstrained Melting Heat Transfer of Nano-Enhanced Phase-Change Materials in a Spherical Capsule for Latent Heat Storage: Effects of the Capsule Size

Research on the modification of microencapsulated phase change material for thermal energy storage by nano-SiO2 and graphite

Effect of Alkaline Ph on Formation of Lauric Acid/sio2 Nanocapsules Via Sol-Gel Process for Solar Energy Storage

Encapsulation of Phase Change Materials Via Interfacial Miniemulsion Polymerization for High Thermal Energy Storage Density

Thermophysical Properties of a Novel Nanoencapsulated Phase Change Material

Nano-encapsulated PCM Via Pickering Emulsification.

An Experimental Study of Inward Solidification of Nano-Enhanced Phase Change Materials (nepcm) Inside A Spherical Capsule

Synthesis of high latent heat lauric acid/silica microcapsules by interfacial polymerization method for thermal energy storage

Nanosilicon dioxide hydrosol as surfactant for preparation of microencapsulated phase change materials for thermal energy storage in buildings

Preparation and optimization of nanoencapsulated capric acid being as a renewable phase change material with TiO2 shell as shape-stabilized thermal energy storage material

LiNO 3 /NaCl nanocapsules with high thermal properties for medium-temperature thermal energy storage

Microencapsulating n-docosane phase change material into CaCO3/Fe3O4 composites for high-efficient utilization of solar photothermal energy

Studies on Nanosilica Modified Paraffin Microcapsule Phase Change Energy Storage Materials

Thermal performance enhancement of lauric acid using nanomaterials as composite phase change material

Preparation and properties of lauric acid/silicon dioxide composites as form-stable phase change materials for thermal energy storage

Development of a novel Al-Si microcapsules with heat-resistant, high latent heat, and efficient solar heat absorption

Solvent-Assisted Nanochannel Encapsulation of a Natural Phase Change Material in Polystyrene Hollow Fibers for High-Performance Thermal Energy Storage

Theoretical prediction and experimental investigation on nanoencapsulated phase change material with improved thermal energy storage performance

A Novel Encapsulation Method for Phase Change Materials with a AgBr Shell As a Thermal Energy Storage Material

Fabrication, Characterization and Thermo-Physical Properties of Micro- and Nano- Scaled Phase Change Materials for Thermal Energy Storage