Abstract:Large-scale photocatalytic water-splitting panel reactor system is developed and demonstrated its commercial feasibility. However, water scarcity is one of the leading challenges for the sustainable development of photocatalytic hydrogen generation in a well-lit area. Here, a water harvesting form air-photothermal water evaporation-photocatalytic hydrogen evolution (AWPH) system is devised. The hybrid system comprising carbonized wood (CWx) combined with the hygroscopic salt ZnCl2 and Pt-modified g-C3N4 nanosheets (Pt-CN) as a photocatalyst is developed, in which the carbonized wood has a vertical pore structure that can provide attachment sites for the hygroscopic salt. The water adsorbed by ZnCl2 is driven along the vertical pore channels to the photocatalyst due to the photothermal conversion effect. The bi-phase interfaces of vapor/photocatalyst/hydrogen produced by the photothermal-photocatalytic system significantly reduce the interface barrier and substantially lower the resistance to hydrogen transport. CW550 exhibited a water uptake of 0.56 g g-1 and hydrogen yield of 21.99 mu mol cm-2 under 100 mW cm-2 illumination at a flow rate of 2 mL min-1 for 5 h and a half at atmospheric pressure. A hybrid photocatalytic system splits atmospheric water to produce hydrogen is constructed. The system achieves integrated hydrogen production by combining the properties of low-temperature water adsorption at night, photothermal conversion of water evaporation by solar radiation during the day, and photocatalytic hydrogen production. The optimal sample exhibits a water uptake of 0.56 g g-1 and hydrogen yield of 21.99 mu mol cm-2 under 100 mW cm-2 illumination.image

Photoelectrochemical Gas–Electrolyte–Solid Phase Boundary for Hydrogen Production From Water Vapor

Proton exchange membrane photoelectrochemical cell for water splitting under vapor feeding

Hydrogen from wet air and sunlight in a tandem photoelectrochemical cell

Hydrogen Generation Via Photoelectrocatalytic Water Splitting Using a Tungsten Trioxide Catalyst under Visible Light Irradiation

A Hybrid Photocatalytic System Splits Atmospheric Water to Produce Hydrogen

Photothermally Driven Decoupling of Gas Evolution at the Solid-Liquid Interface for Boosted Photocatalytic Hydrogen Production.

Recent Progress in Photoelectrochemical Water Splitting for Solar Hydrogen Production

Ultrastable low-bias water splitting photoanodes via photocorrosion inhibition and in situ catalyst regeneration

A WO3–CuCrO2 Tandem Photoelectrochemical Cell for Green Hydrogen Production under Simulated Sunlight

MOF-derived porous ZnO integrated with NiO and colloidal QDs for efficient hydrogen generation via a synergistic photoelectrochemical and electrochemical process

Recent Advancements in Photoelectrochemical Water Splitting for Hydrogen Production

Tailoring multi-layered BiVO4/WO3 photoanodes for an efficient photoelectrochemical gas-phase solar water splitting

Tungsten oxide nanostructures and nanocomposites for photoelectrochemical water splitting

Recent Advances in Visible-Light-Driven Photoelectrochemical Water Splitting: Catalyst Nanostructures and Reaction Systems

Decoupled photoelectrochemical water splitting system for centralized hydrogen production

Hydrogen Production by Photoelectrocatalytic Seawater Splitting

Monolithic Photoelectrochemical Device for 19% Direct Water Splitting

Photoelectrochemical Driving and Simultaneous Synthesis of 3-Pyridinecarboxylic Acid and Hydrogen in WO3 Photoanode-Based Cell

Stable Photoelectrochemical Hydrogen Evolution for 1000 h at 14% Efficiency in a Monolithic Vapor-fed Device

A highly integrated, stand-alone photoelectrochemical device for large-scale solar hydrogen production

Photoelectrochemical Ethylene Glycol Oxidization Coupled with Hydrogen Generation Using Metal Oxide Photoelectrodes