Abstract:With the increasing attention on oceanography, more effective exploration technology has been of great interests in the community of ocean engineering. Side-scan sonar is a popular imaging equipment for seabed topography; however, it is commonly used under 4 knots, which does not meet the actual demand of the modern oceanographic research. This paper proposes a high-speed side-scan sonar imaging scheme based on multi-beam forming technology. In this scheme, the digital signal processing system can adjust the maximum response direction of the receiving array by introducing appropriate phase shift or time delay to the output, so as to increase the scanning range and then improve operation efficiency. In order to verify the feasibility of this imaging algorithm, an ocean environment model is constructed, which simulates the acoustic propagation theory, the principle of seabed acoustic backscattering and the acoustic signal modulation method. After analyzing the acoustic characteristics of uniform linear array, an underwater acoustic transducer with multiple receiving subarrays is designed. In the process of simulated navigation, the receiving subarrays will generate the electrical signal containing seabed acoustic information. Based on the simulation signal, the parameters of the digital filter in the actual system can be determined in advance, which provides convenience for later processing. The time delay matrix of each receiving channel based on dynamic focusing beamforming method can be verified by imaging the seabed model. The processed acoustic data are combined with GPS information and heading angle to generate seabed scanning image in the host computer system. This paper mainly presents the imaging algorithm of multi-beam side-scan sonar digital signal processing system.

Design of a collisonless underwater acoustic network

A Real-Time 3-D Underwater Acoustical Imaging System

Underwater Acoustic Communication in a Highly Refractive Environment Using SC–FDE

A Coherent Underwater Acoustic Communication System Based on Joint Iterative Equalization and Decoding Algorithm

Implementation and Application of Underwater Acoustic Sensor Nodes

Joint Passive Detection and Tracking of Underwater Acoustic Target by Beamforming-Based Bernoulli Filter with Multiple Arrays.

An Imaging Algorithm for High-speed Side-scan Sonar Based on Multi-beam Forming Technology

A Low-Complexity Real-Time 3-D Sonar Imaging System with a Cross Array

Design and Implementation of a High-Speed Sonar Data Transmission System

Multi-Frequency Transmitting Beamforming Algorithm Based on Cross Array

Design of Portable Three-Dimensional Sonar for Both Far-Field and Near-Field

An Efficient Near-Field Parallel Subarray Beamforming for Portable 3D Imaging Sonar

Neighbor Discovery with Directional Transmission in Integrated Sensing and Communication for Underwater Acoustic Networks

A New Low-Cost Acoustic Beamforming Architecture for Real-Time Marine Sensing: Evaluation and Design

Cross Power Spectral Density Based Beamforming for Underwater Acoustic Communications

Design of Low-Complexity 3-D Underwater Imaging System with Sparse Planar Arrays

Distributed and Parallel Subarray Beamforming for Underwater Real-Time 3-D Acoustic Imaging

Signal Processing Algorithm and System Realization of Broadband Parametric Array Sub-Bottom Profiler

Acoustic Beam Characterization and Selection for Optimized Underwater Communication

High-Resolution Real-Time Underwater 3-D Acoustical Imaging Through Designing Ultralarge Ultrasparse Ultra-Wideband 2-D Arrays.

Designing Acoustic Reconfigurable Intelligent Surface for Underwater Communications