Abstract:As a green cementing material, geopolymer solves the problems of environment pollution and building resource waste. The working performance, including setting time and flowability, were firstly evaluated to select a basic mix proportion of geopolymer. Then, the study was aimed at assessing the effect of PVA fibers (1.50%, 2.00% and 2.50% by the volume of sample) and MWCNTs contents (0.05%, 0.10%, 0.15% and 0.20% by the mass of blinders) on the impermeability and mechanical strength of engineering geopolymer composite(EGC). Meanwhile, the pore structure, polymerization products and microscopic morphologies of geopolymers incorporated with different MWCNTs contents were researched by micro-structure analysis. The experimental results show the 0.1.% functionalized MWCNTs effectively improve the compressive strength, bending strength and impermeability of modified geopolymer by 9.4%, 23.6% and 63.2%, respectively, and the corresponding relative permeability coefficient of modified geopolymer is decreased by 63.24% compared to that of control geopolymer. Importantly, the incorporation of the functionalized MWCNTs can refine the pore structure and enhance whole compactness of the internal structure, meanwhile limit the extension and expansion of micro-cracks owning to its nano-nucleation, nano-filling and nano-laying effect. Furthermore, the introduction of functionalized MWCNTs improves the geopolymerization reaction of Si-O-Si bands by means of FT-IR analysis. The MIP analysis show that the addition of functionalized MWCNTs can increase the proportion of harmless pores but decrease the quantity of harmless pores. Significantly, the effective porosity(rather than total porosity) should be adopted to evaluate the impermeability of geopolymer because of the appearance of ink bottle pores.

Process and mechanisms of multi-stage water sorptivity in hydrophobic geopolymers incorporating polydimethylsiloxane

Waterproof geopolymer composites modified by hydrophobic particles and polydimethylsiloxane

Matrix Wettability and Mechanical Properties of Geopolymer Cement-Polydimethylsiloxane (PDMS) Hybrids

Early-Stage Geopolymerization Process of Metakaolin-Based Geopolymer

Effect of PDMS incorporation on property and microstructure of geopolymer

Investigation on the Effect of Fiber Wettability on Water Absorption Kinetics of Geopolymer Composites

Early-age Deformation of Hydrophobized Metakaolin-Based Geopolymers

Utilisation of Biosilica as Active Silica Source for Metakaolin-Based Geopolymers

Green Protective Geopolymer Coatings: Interface Characterization, Modification and Life-Cycle Analysis

Study of the preparation and properties of hydrophobic and high strength geopolymers

Compositional Dependence of Pore Structure, Strengthand Freezing-Thawing Resistance of Metakaolin-Based Geopolymers

A novel water-swelling grouting material formulation and its performance for water rushing in karst strata

Investigation on Physical Behavior, Impermeability and Micromechanism of Engineering Geopolymer Composites Modified with MWCNTs

Synthesis of reticular long-carbon-chain polysiloxane and its hydrophobic modification of phosphogypsum-based materials

Mechanistic understanding of geopolymerization at the initial stage: Ab initio molecular dynamics simulations

Facile synthesis of porous geopolymers via the addition of a water-soluble pore forming agent

Synthesis and Characterization of Novel Hybrid Wollastonite-Metakaolin-Based Geopolymers

Research and Application Progress of Geopolymers in Adsorption: A Review

Crystallization Behavior and Mechanical Properties of High Open Porosity Dolomite Hollow Microspheres Filled Hybrid Geopolymer Foams

Alkali-activated organogeopolymers with volumetric superhydrophobicity

Understanding the generation and evolution of hydrophobicity of silane modified fly ash/slag based geopolymers