Abstract:This paper investigates the impact of the technological process (Mechanochemical Activation (MA) of the powder in combination with the Spark Plasma Sintering (SPS) method) on the final properties of lead-free Ba(Fe1/2Nb1/2)O3 (BFN) ceramic materials. The BFN powders were obtained for different MA duration times (x from 10 to 100 h). The mechanically activated BFN powders were used in the technological process of the BFN ceramics by the SPS method. The measurements of the BFNxMA ceramic samples included the following analysis: Scanning Electron Microscopy (SEM), Energy Dispersive Spectrometry (EDS), DC electrical conductivity, and dielectric properties. X-ray diffractions (XRD) tests showed the appearance of the perovskite phase of BFN powders after 10 h of milling time. The longer milling time (up 20 h) causes the amount of the perovskite phase to gradually increase, and the diffraction peaks are more clearly visible. Short high energy milling times favor a large heterogeneity of the grain shape and size. Increasing the MA milling time to 40 h significantly improves the microstructure of BFN ceramics sintered in the SPS technology. The microstructure becomes fine-grained with clearly visible grain boundaries and higher grain size uniformity. Temperature measurements of the BFN ceramics show a number of interesting dielectric properties, i.e., high values of electric permittivity, relaxation properties with a diffusion phase transition, as well as negative values of dielectric properties occurring at high temperatures. The high electric permittivity values predestines the BFNxMA materials for energy storage applications e.g., high energy density batteries, while the negative values of dielectric properties can be used for shield elements against the electromagnetic radiation.

Dielectric properties of the PFN ceramics obtained different chemical-wet technology and sintering by hot pressing method

Electrophysical properties of PMN-PT-PS-PFN:Li ceramics

Ferroelectric and dielectric properties of ferroelectromagnet Pb(Fe1/2Nb1/2)O3 ceramics and thin films

Preparation of 0.5pbtio_3/0.5nife_2o_4 Ceramic Composites by Sol-gel Method

Structural and electrical properties investigations of Pb(Mg1/3Nb2/3)O3–PbTiO3–Pb(Fe1/2Nb1/2)O3 ceramics

Effects of Nano-Sized In2O3on Sintering Behavior and Electrical Properties of 0.28Pb(in1/2nb1/2)o3-0.40Pb(mg1/3< /Sub>nb2/3)o3-0.32Pbtio3ceramics

Phase transition characters of ferroelectromagnet Pb(Fe1/2Nb1/2)O3

PHASE TRANSITION CHARACTERS OF FERROELETROMAGNET Pb(Fe1/2Nb1/2)O3

Phase diagram and properties of high TC/TR-T Pb (In 1/2 Nb1/2) O3- Pb(Zn1/3 Nb 2/3) O3-PbTiO3 ferroelectric ceramics

Ferroelectric Phase Transition and Electrical Properties of High-Tc PMN-PH-PT Ceramics Prepared by Partial Oxalate Route

Ferroelectricity and Ferromagnetism in Fine-Grained Multiferroic Batio3/(Ni0.5zn0.5)Fe2o4 Composites Prepared by A Novel Hybrid Process

Preparation, Structure, and Electric Properties of the Pb(Zn1/3Nb2/3)O3–Pb(Yb1/2Nb1/2)O3–PbTiO3 Ternary Ferroelectric System Ceramics Near the Morphotropic Phase Boundary

Influence of the Preparation Method on the Structural, Morphological and Dielectric Properties of FeNbO4 Ceramics

Design Morphotropic Phase Boundary Composition in the Pb(In1/2Nb1/2)O3-Pb(Mg1/3Nb2/3)O3-PbTio3 System and Its Performance

DIELECTRIC RELAXATION OF COMPLEX PEROVSKITE FOR Pb(Fe_(1/2)Nb_(1/2))O_3

Preparation of the Percolative Nickel-Zinc Ferrite/Barium Titanate Composite Ceramics with Liquid-Solid Hybrid Method

Magnetic and dielectric properties of ferroelectromagent Pb (Fe1/2Nb1/2) O3

Mechanochemical Activation and Spark Plasma Sintering of the Lead-Free Ba(Fe1/2Nb1/2)O3 Ceramics

Sol-gel synthesis and multiferroic properties of pyrochlore-free Pb(Fe0.5Nb0.5)O3 thin films

Study on Dielectric-Properties of Pmn-Pzn-Pt Ferroelectric Relaxor Ceramics