Abstract:The conventional graphite anode is still insufficient to meet the demand due to its low theoretical specific capacity(372 mAhg-1). Compared to the graphite, the high surface-to-volume ratio and open porous system of graphene shows great advantages:i) fast ion transport enabling the high rate capability, which is an obstacle for graphite with microsize bulk lithium diffusion; ii) the large surface areas of graphene can provide more electrochemical reaction active sites for energy storage. Meanwhile, Graphene is an excellent substrate to host active nanomaterial for energy applications due to its high conductivity, large surface area, structural flexibility, and chemical stability.1,2Overall, the superior electronic conductivity and mechanical properties of graphene make it suitable for fabrication into high-performance composites with other anode materials for LIBs. Recently, Alloy-type anodes (Si, Ge, Sn, Sb, etc.) have attracted much attention due to their higher Li storage capacity than the graphite anode that is currently used in Li-ion batteries. Compared with the silicon etc., Germanium has high theoretical capacity (1384 mAh/g), good lithium diffusivity (400 times faster than in silicon), and high electrical conductivity (104 times higher than silicon).3 However, the practical usage of Ge as an anode material is hindered by dramatic volume changes (∼300%) caused by insertion/extraction of lithium ions, which results in crack and pulverization, and loss of electrode contact.4 Herein, we developed a facile synthesis method (solution-phase reactions) to form hybrid materials of amorphous hierarchical porous GeOx whose primary particles are 3∼7 nm diameter anchored on reduced grapheme oxide (RGO) sheets for lithium ion battery applications. The high rate performance of mesoporous GeOx/RGO composite is attributed to (1) the amorphous hierarchical porous GeOx whose primary particles are 3∼7 nm diameter anchored on conducting RGO stabilize the cycling performance and rate capability; (2)fast charge transfer reaction at the large interfacial area of RGO between hybrid electrode and liquid electrolyte. Acknowledgements This work is supported by the Project of the Ningbo 3315 International Team of Advanced Energy Storage Materials, China Postdoctoral Science Foundation funded project. References: Yoo, E., et al.Large reversible Li storage of graphene nanosheet families for use in rechargeable lithium ion batteries. Nano Letters. 2008.8(8): 2277-2282. Xiang, H. F., et al. Graphene sheets as anode materials for Li-ion batteries: preparation, structure, electrochemical properties and mechanism for lithium storage.Rsc Advances 2012. 2(17): 6792-6799. Wang, X. L., et al. Amorphous Hierarchical Porous GeOx as High-Capacity Anodes for Li Ion Batteries with Very Long Cycling Life. Journal of the American Chemical Society 2011. 133(51): 20692-20695 Yuan, F. W., et al. Alkanethiol-Passivated Ge Nanowires as High-Performance Anode Materials for Lithium-Ion Batteries: The Role of Chemical Surface Functionalization. Acs Nano 2012. 6(11): 9932-9942.

Synthesis and Electrochemical Performance of a PEDOT:PSS@Ge Composite as the Anode Materials for Lithium-Ion Batteries

Facile Scalable Synthesis Of Carbon-Coated Ge@C And Gex@C (X=S, Se) Anodes For High Performance Lithium-Ion Batteries

Harnessing The Concurrent Reaction Dynamics In Active Si And Ge To Achieve High Performance Lithium-Ion Batteries

Three-Dimensional Double-Walled Ultrathin Graphite Tube Conductive Scaffold with Encapsulated Germanium Nanoparticles as a High-Areal-Capacity and Cycle-Stable Anode for Lithium-Ion Batteries

Confining Nano-GeP in Nitrogenous Hollow Carbon Fibers toward Flexible and High-Performance Lithium-Ion Batteries

C porous microparticles as high-rate anode materials for lithium-ion batteries

Ge nanoparticles uniformly immobilized on 3D interconnected porous graphene frameworks as anodes for high-performance lithium-ion batteries

One-step in situ encapsulation of Ge nanoparticles into porous carbon network with enhanced electron/ion conductivity for lithium storage

A three-dimensional Ge@C anode with a hollow and micro/nano structure for high-capacity lithium-ion battery

Confining Nano-GeS 2 in Cross-Linked Porous Carbon Networks for High-Performance and Flexible Li-Ion Battery Anodes

Confining Nano-GeS2 in Cross-Linked Porous Carbon Networks for High-Performance and Flexible Li-Ion Battery Anodes

Layered phosphorus-like GeP5: a promising anode candidate with high initial coulombic efficiency and large capacity for lithium ion batteries

Amorphous Hierarchical Porous GeO X /reduced Graphene Oxide Composite As a High-Performance Anode Material for Lithium Ion Batteries

GeO2 Nanoparticles Decorated in Amorphous Carbon Nanofiber Framework as Highly Reversible Lithium Storage Anode

Ge/C Nanowires As High-Capacity and Long-Life Anode Materials for Li-Ion Batteries

Binder-Free Germanium Nanoparticle decorated Multi-Wall Carbon Nanotube Anodes prepared via two-step Electrophoretic Deposition for high capacity Li-Ion Batteries

Synthesis and Fast Exfoliation of Layered GeP Nanosheets for Advanced Li-Ion Batteries

Facile Synthesis of Layer Structured GeP3/C with Stable Chemical Bonding for Enhanced Lithium-Ion Storage

Heterogeneous isomorphism hollow SiGe nanospheres with porous carbon reinforcing for superior electrochemical lithium storage

In Situ One-Step Synthesis of a Ge/Zn2GeO4/N-Doped Carbon Composite As an Anode Material for Lithium-Ion Batteries

Free-standing N-doped hollow carbon fiber encapsulate P/GeP hybrid anode for rechargeable Li-ion battery