Abstract:In reinforced concrete (RC) structures, new-to-old concrete interfaces are widely present due to precast splices, repairs, and construction joints. In this paper, both monolithic and segmental specimens were fabricated with five kinds of water–cement ratios, including ordinary and high-strength concrete. The impressed current-accelerated corrosion test was used, and the degree of reinforcement corrosion was controlled by Faraday's Law. In the accelerated corrosion process, the concrete surface cracking, steel corrosion, and mechanical properties of the corroded steels in the segmental specimens were investigated and compared with monolithic specimens considering the pouring method, concrete strength, and the strength difference between new and old concrete. The prediction of concrete cracking time was also discussed. The results indicated that, for the monolithic specimens, longitudinal cracks could be observed on the ordinary concrete surface, while no cracks were produced on a high-strength concrete surface; only the rust leaked out at the ends. For the segmental specimens, both longitudinal and transverse cracks were produced on an ordinary concrete surface, while only transverse cracks were produced at the high-strength new-to-old concrete interfaces. The steel embedded in the segmental specimens suffered more sectional loss at the new-to-old concrete interfaces. An influence coefficient based on the section loss of the rebar was proposed to evaluate the influence of interfaces on the rust uniformity of rebars. When there were differences in strength between new and old concrete, the influence of the interface on the uniformity of steel bar cross-section loss slightly increased. Based on available theoretical analysis for uniform corrosion, the concrete cracking time of the monolithic specimens was predicted, which was basically consistent with experimental phenomena. However, further research is needed to predict the service life of segmental specimens with new-to-old concrete interfaces.

Damage behaviours of new-to-old concrete interfaces and a damage prediction model of reinforced concrete

State-of-art of corrosion-induced cracking of reinforced concrete structures

Analytical model for critical corrosion level of reinforcements to cause the cracking of concrete cover

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

Damage Analysis and Cracking Model of Reinforced Concrete Structures with Rebar Corrosion

Modelling the corrosion mechanism of steel bars in chloride-contaminated concrete with transverse cracks

Cover Cracking Model in Reinforced Concrete Structures Subject to Rebar Corrosion

Prediction of Corrosion-Induced Crack Width of Corroded Reinforced Concrete Structures

Mesoscale Modeling of New-to-old Concrete Interface under Combined Shear and Compressive Loads

A novel multi-scale model for predicting the thermal damage of hybrid fiber-reinforced concrete

Concrete Cover Cracking and Reinforcement Corrosion Behavior in Concrete with New-to-Old Concrete Interfaces

New concrete cracking model established based on fracture mechanics and damage theory

Corrosion-crack path based probabilistic model to predict the durability behavior of RC components

Reinforcement Corrosion-Induced Cover Cracking and Its Time Prediction for Reinforced Concrete Structures

Modeling of Time to Corrosion-Induced Cover Cracking in Reinforced Concrete Structures

Experimental Study on Direct Shear Performance of Concrete-Concrete Interface of Prefabricated Structure Sleeve Grouting Connection

3D meso‐scale numerical model and dynamic mechanical behavior of reinforced concrete

Relationship model between surface strain of concrete and expansion force of reinforcement rust

An improved damage-plasticity material model for concrete subjected to dynamic loading

Corrosion-Induced Cracking Model of Concrete Considering a Transverse Constraint

Fracture Model for Protective Layer Cracking of Reinforced Concrete Structure Due to Rebar Corrosion