Abstract:To maximize the capabilities of nano- and micro-class satellites, which are limited by their size, weight, and power, advancements in deployable mechanisms with a high deployable surface area to packaging volume ratio are necessary. Without progress in understanding the mechanics of high-strain materials and structures, the development of compact deployable mechanisms for this class of satellites would be difficult. This paper presents fabrication, experimental testing, and progressive failure modeling to study the deformation of an ultra-thin composite beam. The research study examines the deformation modes of a post-deployed boom under repetitive pure bending loads using a four-point bending setup and bending collapse failure under eccentric buckling. The material and fabrication challenges for ultra-thin, high-stiffness (UTHS) composite boom are discussed in detail. The continuum damage mechanics (CDM) model for the beam is calibrated using experimental coupon testing and was used for a finite element explicit analysis of the boom. It is shown that UTHS can sustain a bending radius of 14 mm without significant fiber and matrix damage. The finite element model accurately predicts the localized transverse fiber damage under eccentric buckling and buckling stiffness of 15.6 N/mm. The results of the bending simulation were found to closely match the experimental results, indicating that the simulation accurately shows deformation stages and predicts damage to the material. The findings of this research provide a better understanding of the structure characteristics with the progressive damage model of the UTHS boom, which can be used for designing a complex deployable payload for nano-micro-class satellites.

Numerical simulation of deployable ultra-thin composite shell structures for space applications and comparison with experiments

Deployment analysis of deployable space panel and shell structure

Kinematic Analysis of the Deployable Truss Structures for Space Applications

Kinematic Analysis and Model Fabrication of a Space Deployable Optical Baffle

Experimental and Stowing/deploying Dynamical Simulation of Lenticular Carbon Fiber Reinforced Polymer Thin-Walled Tubular Space Boom

Coiling and Deploying Dynamic Optimization of a C-cross Section Thin-Walled Composite Deployable Boom

Mechanics of Pure Bending and Eccentric Buckling in High-Strain Composite Structures

Experimental validation study on snap through and coiling up of deployable composite shells

Design of a New N-Shape Composite Ultra-Thin Deployable Boom in the Post-Buckling Range Using Response Surface Method and Optimization

Thermo-structural analysis of deployable composite booms with slotted hinges for space applications

Wrapping Dynamic Analysis and Optimization of Deployable Composite Triangular Rollable and Collapsible Booms

Dynamic Experimental Study of Deployable Composite Structure

Bistable Deployable Composite Booms with Parabolic Cross Sections

Mechanical Property Analysis of a Boom-Membrane Structure Used for Aerospace Technologies

Multiscale Modeling of Viscoelastic Behavior of Unidirectional Composite Laminates and Deployable Structures

Modeling viscoelasticity-viscoplasticity of high-strain composites for space deployable structures

Roll-Out Deployment Process Analysis of a Fiber Reinforced Polymer (FRP) Composite Tape-Spring Boom

Experimental Study and Numerical Simulation of Load-bearing/coiling Characteristics of Thin-walled Lenticular Composite Booms

Blossoming Analysis of Composite Deployable Booms

Experimental Study of Bistable Behaviors of Deployable Composite Structure

Simplified Analytical Model for Predicting Neutral Cross-Section Position of Lenticular Deployable Composite Boom in Tensile Deformation