Abstract:The transmittance diminishment of solar cells, caused by dust accumulation is higher than 52.54% every year (2006 Energ. Convers. Manage. 47 3192), which greatly reduces their overall efficiencies of power conversion. Any other strategy for improving the photovoltaic device cannot compensate for this loss caused by the dust. However, this critical issue has not received much attention. In this work, a kind of self-cleaning coating consisting of ZnO nanowire-silicon pyramid hierarchical structures is proposed to overcome the dust accumulation on the photovoltaic device. The principle of designing this self-cleaning is based on the Cassie-Baxter theory. Both the micron size effect for superhydrophobicity and the performance of anti-reflection of light of the substrate should be retained, which are the requirements of application of solar cell. The pyramid-like silicon (named silicon pyramid, hereafter) is fabricated by simple chemical etching. The effects of isopropanol, KOH, etching time, and etching temperature on the morphology of the silicon pyramid are investigated by using systematic statistical design and analysis method, to obtain the best distribution and size of the silicon pyramid. In the systematic statistical design and analysis method, the pick-the-winner rule is adopted. Eventually, we find that the optimized conditions for etching silicon pyramid (according the requirements of self-clean) are as follows: etching time is 60 min, etching temperature is 95℃, and mixture is 80 mL DI water, 2.9598 g KOH and 20 mL isopropanol. Moreover, ZnO nanowire-silicon pyramid hierarchical structures for the application of photovoltaic device are successfully hydrothermally grown on the substrate of silicon pyramid for the first time. The obtained self-cleaning coating consists of ZnO nanowire (with a diameter of 136 nm) and silicon pyramid (with a size of 8-11 m). The surface of this coating possesses superhydrophobic properties, i.e., a water contact angle of 154 and a contact angle hysteresis of less than 10, after being modified by heptadecafluorodecyltrimethoxysilane. Also, our obtained ZnO nanowire-silicon pyramid hierarchical structures have quite a good performance of anti-reflection, which appear gray in the normal environment. And the mechanism for it is postulated. Importantly, some new phenomena, such as high temperature improving the growth of silicon pyramid, are also revealed. Besides, the physical mechanism for high temperature improving the growth of silicon pyramid and anisotropic etching of silicon substrate is discussed. It is indicated that the anisotropic behavior is attributed to small difference in energy level (being a function of the crystal orientation) between the back-bond surface states. The method we proposed to achieve self-cleaning coating is versatile, reliable and low-cost, which is also compatible with contemporary micro-and nano-fabrication processes.

Catalyst-free Synthesis of Hydrophobic ZnO Nanowires for Self-cleaning Applications

A Facile Method to Fabricate Superhydrophobic ZnO Nanostructure with Petal Effect

Conversion of large-scale oriented ZnO rod array into nanotube array under hydrothermal etching condition via one-step synthesis approach

Direct Synthesis Of Superhydrophobic Silica Nanowires Surface By Evaporating Zns On Silicon Wafer

A facile surfactant assisted hydrothermal synthesis of ZnO and graphene loaded ZnO for efficient photocatalytic self-cleaning

On the formation of well-aligned ZnO nanowall networks by catalyst-free thermal evaporation method

Facile Synthesis of Superhydrophobic Surface of ZnO Nanoflakes: Chemical Coating and UV-induced Wettability Conversion

Nanowire-based multifunctional antireflection coatings for solar cells

Structure, Photoluminescence and Wettability Properties of Well Arrayed ZnO Nanowires Grown by Hydrothermal Method.

Hydrothermal Growth of Superhydrophobic ZnO Nanorods Array Films

Superhydrophobic surfaces based on ZnO-constructed hierarchical architectures

Fabrication of Zno Nanowire-Silicon Pyramid Hierarchical Structure, and Its Self-Cleaning

Image analysis of PDMS/ZnO nanocomposite surfaces for optimized superhydrophobic and self-cleaning surface design

Growth of zinc oxide nanowires by a hot water deposition method

Superhydrophobic Surfaces Via Controlling the Morphology of ZnO Micro/nano Complex Structure

Superhydrophobic Multi-Scale ZnO Nanostructures Fabricated by Chemical Vapor Deposition Method

Synthesis of zinc hydroxyl acetate nanosheet-assembled honeycomb-like and flower-like structures by chemical bath deposition method for the construction of hydrophobic surfaces

Wet chemical synthesis of ultralong and straight single-crystalline ZnO nanowires and their excellent UV emission properties

Surface energy and stress driven growth of extremely long and high-density ZnO nanowires using a thermal step-oxidation process

Catalyst-free Synthesis of ZnO Nanowire Arrays on Zinc Substrate by Low Temperature Thermal Oxidation

Preparation and Properties of ZnS Superhydrophobic Surface with Hierarchical Structure