Abstract:Transactions of the Institute of Measurement and Control, Ahead of Print. Accurate dynamic parameters are essential for precise control of model-based manipulators. Due to the direct connection between the joint axis and the motor rotor of the direct drive manipulator, using additional joints would increase the disturbance of the system, leading to substantial trajectory tracking errors, which could potentially harm the manipulator if the tracking error exceeds the limited position of joints, and it also curtails the comprehensive parameter excitation and affects the identification accuracy. Restricting joint movement to a narrow area can prevent this injury, but it also curtails the comprehensive parameter excitation and affects the identification accuracy. To address these challenges, this paper presents a novel method for identifying dynamic parameters of multiple degree-of-freedom (DOF) series direct drive manipulators. Specifically, an open-loop gravity torque compensation strategy with spatial geometric characteristics is introduced to ensure secure operation during manipulator identification processes. Meanwhile, an improved model reference adaptive identification (MRAI) method is presented to estimate the nominal inertia quickly and accurately. Finally, a disturbance observer (DOB) based on minimum model perturbation bound is proposed to compensate for significant variations in model disturbances, enabling stable and precise tracking of planned exciting trajectories. This proves advantageous for fully exciting dynamic parameters and improving identification accuracy. Simulation experiments demonstrate that the tracking error of each joint's exciting trajectory is within 0.07 radians, and the maximum absolute error of identifying dynamic parameters is 0.099169409, which verifies the feasibility and effectiveness of the proposed method.

Coupling dynamic modelling and parameter identification of a flexible manipulator system with harmonic drive

Dynamic Modeling and Analysis for Coupling Processing 6-DOF 3 P3 R Manipulator

Closed-Loop Dynamic Parameter Identification of Robot Manipulators Using Modified Fourier Series

Friction-Identification of Harmonic Drive Joints Based on the MCMC Method

Decoupled Dynamic Model and Control of Flexible Space Manipulator

A new control method of flexible-joint manipulator with harmonic drive

Parameter Identification of Hydraulic Manipulators Considering Physical Feasibility and Control Stability

Modeling and Precise Position Control of Flexible Joints with Harmonic Drives

Dynamics Modeling and Parameter Identification for a Coupled-Drive Dual-Arm Nursing Robot

Dynamic Identification for Robot Manipulators Based on Modified Fourier Series

Coupling vibration analysis for harmonic drive in joint and flexible arm undergoing large range motion

A model-based PID-like motion control method for flexible-joint manipulator with harmonic drives

Hierarchical Decoupling Controller with Cylinder Separated Model of Hydraulic Manipulators for Contact Force/Motion Control

Modeling and Active Vibration Control of an Intelligent Flexible Manipulator System

A novel dynamic parameter identification method for the multi-degrees-of-freedom series direct drive manipulator

System Identification and a Model-Based Control Strategy of Motor Driven System with High Order Flexible Manipulator.

Terminal Force Soft Sensing of Hydraulic Manipulator Based on the Parameter Identification

Dynamic Analysis Of Flexible Space Manipulators With Harmonic Reducer

Dynamic parameters and friction model identification of an industrial hybrid robot

A Vibration and Movement Coupled Modeling Approach of 3 DOF Flexible Joint Manipulators

Modeling and Identification of Friction Torque in Harmonic Drive Systems