Abstract:Pharmaceutical pollutants, a group of emerging contaminants, have attracted outstanding attention in recent years, and their removal from aquatic environments has been addressed. In the current study, a new sponge-based moving bed biofilm reactor (MBBR) was developed to remove chemical oxygen demand (COD) and the pharmaceutical compound Ibuprofen (IBU). A 30-L pilot scale MBBR was constructed, which was continuously fed from the effluent of the first clarifier of the Southern Tehran wastewater treatment plant. The controlled operational parameters were pH in the natural range, Dissolved Oxygen of 1.5-2 mg/L, average suspended mixed liquor suspended solids (MLSS), and mixed liquor volatile suspended solids (MLVSS) of 1.68 ± 0.1 g/L and 1.48 ± 0.1 g/L, respectively. The effect of hydraulic retention time (HRT) (5 h, 10 h, 15 h), filling ratio (10%, 20%, 30%), and initial IBU concentration (2 mg/L, 5 mg/L, 10 mg/L) on removal efficiencies was assessed. The findings of this study revealed a COD removal efficiency ranging from 48.9 to 96.7%, with the best removal efficiency observed at an HRT of 10 h, a filling ratio of 20%, and an initial IBU concentration of 2 mg/L. Simultaneously, the IBU removal rate ranged from 25 to 92.7%, with the highest removal efficiency observed under the same HRT and filling ratio, albeit with an initial IBU concentration of 5 mg/L. An extension of HRT from 5 to 10 h significantly improved both COD and IBU removal. However, further extension from 10 to 15 h slightly enhanced the removal efficiency of COD and IBU, and even in some cases, removal efficiency decreased. Based on the obtained results, 20% of the filling ratio was chosen as the optimum state. Increasing the initial concentration of IBU from 2 to 5 mg/L generally improved COD and IBU removal, whereas an increase from 5 to 10 mg/L caused a decline in COD and IBU removal. This study also optimized the reactor's efficiency for COD and IBU removal by using response surface methodology (RSM) with independent variables of HRT, filling ratio, and initial IBU concentration. In this regard, the quadratic model was found to be significant. Utilizing the central composite design (CCD), the optimal operating parameters at an HRT of 10 h, a filling ratio of 21%, and an initial IBU concentration of 3 mg/L were pinpointed, achieving the highest COD and IBU removal efficiencies. The present study demonstrated that sponge-based MBBR stands out as a promising technology for COD and IBU removal.

Evaluation of the Performance of Advanced Sequencing Batch Reactor Biological Processes in the Removal of Nutrients from Municipal Wastewater in Yazd City: A Case Study

Evaluating the performance of a sequencing batch reactor for sanitary wastewater treatment using artificial neural network

Evaluation of moving-bed biofilm sequencing batch reactor (MBSBR) in operating A2O process with emphasis on biological removal of nutrients existing in wastewater

A Reformed SBR Technology Integrated with Two‐step Feeding and Low‐intensity Aeration for Swine Wastewater Treatment

Evaluating the performance of sequential batch reactor (SBR & ASBR) wastewater treatment plants, case study

Enhancing sequencing batch reactors for efficient wastewater treatment across diverse applications: A comprehensive review

Comparative Study of Treatment and Performance in Membrane Bioreactor and Sequencing Batch Reactor for Hospital Wastewater in Smart Cities

Performance evaluation of a new sponge-based moving bed biofilm reactor for the removal of pharmaceutical pollutants from real wastewater

Simultaneous Removal of Organic Matter and Nutrients from High Strength Organic Wastewater Using Sequencing Batch Reactor (SBR)

Studying the Effluent Quality of Enhanced Modified Ludzack Ettinger-oxic Settling Anaerobic Process (E-MLE-OSA) for Treating Real Municipal Wastewater

Metals removal from municipal landfill leachate and wastewater using adsorbents combined with biological method

Evaluation of a novel integrated membrane biological aerated filter for water reclamation: A practical experience

Pollutants removal from synthetic wastewater by the combined electrochemical, adsorption and sequencing batch reactor (SBR)

Performance and mechanism of a novel algal-bacterial symbiosis system based on sequencing batch suspended biofilm reactor treating domestic wastewater.

Organic and nutrient removal for domestic wastewater treatment using bench-scale sequencing batch reactor

Investigation, biokinetic calculation, and modelling of a real combined industrial wastewater biological treatment process by activated sludge models

Application of the central composite design and response surface methodology for the treatment of Kermanshah landfill leachate by a sequencing batch reactor

To Optimize Sequencing Batch Reactor (SBR) and Monitor Aerobic Granular Sludge (AGS) Development for Domestic Wastewater Treatment

Enhanced ammonium removal from liquid anaerobic digestion residuals in an advanced sequencing batch reactor system

Study on SBBR process for simulation swine wastewater treatment

Study on the Treatment of Wastewater Produced by Biomass Gasification Power Plant with Sequencing Batch Reactor Biological Technique