Abstract:Journal of Low Frequency Noise, Vibration and Active Control, Ahead of Print. The ride comfort is a key research area for the quality improvement of railway vehicles. Several control methods have been developed to improve the ride comfort, in which the semi-active control approach inherits the advantages of passive and active control approaches. However, the semi-active control may perform ineffectively in vibration attenuation when the carbody load changes. To address this issue, we proposed a novel hybrid control method that combines the skyhook (SH) and displacement velocity (DV) control methods to reduce vibrations of the carbody in the lateral direction under carbody load changes. First, a hybrid control model built in Matlab software was applied to a quarter railway vehicle model for a preliminary assessment of the ride comfort. Second, to provide a more comprehensive evaluation, the proposed model was applied to a whole railway vehicle model using co-simulation (Matlab-Simpack). In the quarter model, under the sinusoidal excitation, the hybrid control showed a lower acceleration by 48.5% and 42.8% when the carbody load reduced to a half and a quarter, respectively, compared to the passive control. This finding was confirmed with the whole model. Moreover, in the whole model, under the track irregular excitation, the hybrid control showed a lower acceleration by 26.6% and 17.4% when the carbody load reduced to a half and a quarter, respectively. Further, the proposed method showed an acceptable safety level, measured by the derailment coefficient (0.0743 at a half load and 0.089 at a quarter load). In conclusions, the proposed hybrid SH-DV control exhibits high robustness, adaptability, effectiveness, and acceptable safety level in response to variations in body load.

CAN-Based Vibration Control for Networked Vehicle Active Suspension with Both Network-Induced Delays and Packet-Dropouts

Dynamic event-triggered scheduling and control for vehicle active suspension over controller area network

Semi-active Bounded Optimal Control of Uncertain Nonlinear Coupling Vehicle System with Rotatable Inclined Supports and MR Damper under Random Road Excitation

Bounded Time-Delay Control Performance of Two-Degree-of-freedom Nonlinear Vehicle System under Random Road Excitation Using MR Damper

Time-Delay Vibration Reduction Control of 3-DOF Vehicle Model with Vehicle Seat

Adaptive Robust Vibration Control of Full-Car Active Suspensions With Electrohydraulic Actuators

Robust control design for active suspension system with uncertain dynamics and actuator time delay

Vibration Performance Optimization of the Semi-Active Suspension with Fuzzy Control Method

Analysis and Experiment of Time-Delayed Optimal Control for Vehicle Suspension System

Multi-objective H2/H∞ control of uncertain active suspension systems with interval time-varying delay

Adaptive Fuzzy PID Control Strategy for Vehicle Active Suspension Based on Road Evaluation

Model Predictive Control of a Semi-Active Vehicle-Mounted Vibration Isolation Platform

Bioinspired Nonlinear Dynamics-Based Adaptive Neural Network Control for Vehicle Suspension Systems With Uncertain/Unknown Dynamics and Input Delay

Time-varying Delays Compensation Algorithm for Powertrain Active Damping of an Electrified Vehicle Equipped with an Axle Motor During Regenerative Braking

Effect of time-delay feedback control on vehicle seat vibration reduction and suspension performance

Adaptive event-based robust passive fault tolerant control for nonlinear lateral stability of autonomous electric vehicles with asynchronous constraints

Adaptive variable domain fuzzy PID control strategy based on road excitation for semi-active suspension using CDC shock absorber

A new hybrid control strategy for improving ride comfort on lateral suspension system of railway vehicle

Reinforcement-Learning-Based Vibration Control for a Vehicle Semi-Active Suspension System via the PPO Approach

Attitude Control of Vehicle Based on Series Active Suspensions

Combined AFS and DYC Control of Four-Wheel-Independent-Drive Electric Vehicles over CAN Network with Time-Varying Delays