Abstract:Microfluidic spinning technology provides a powerful platform for the preparation of functional regenerated cellulose fibers (RCFs) with geometric diversities, which have promising applications in numerous fields. Ionic liquid (IL) is considered to be an optimized solvent for the preparation of RCFs due to its excellent cellulose solubility, but its high viscosity leads to some challenges in the preparation of RCFs using microfluidic spinning. Herein, it is indicated that adding DMSO into IL/cellulose spinning dope is a facile and effective strategy to realize stable microfluidic spinning, and this strategy would not sacrifice the spinning efficiency or the mechanical properties of RCFs. In addition, the steady and oscillatory shear data proved that DMSO reduced the viscosity by hundreds of times by weakening the frictional resistance of the molecules and reducing the aggregations in solution, without affecting on the state of the cellulose entanglement network. Furthermore, computational fluid dynamics (CFD) simulation results indicated that the pressure in the channel was greatly decreased due to the reduction in the viscosity of the spinning dope, but the laminar flow in the microchannel would not be changed. The RCFs were prepared using 1-ethyl-3-methylimidazolium acetate ([Emim]Ac)/DMSO with the mass ratio of 3:2−1:3 as the solvents. Characterization results showed that all of the fabricated RCFs were dense and glossy, and the crystallinity of RCFs was decreased with the increase of the DMSO content in the solvent, while the DP and thermal stability were not affected. Moreover, the RCFs exhibited a superior tensile strength of 197.38−218.14 MPa and an elongation of 8.60–9.67%.

Preparation, Structure and Performances of Cross-Linked Regenerated Cellulose Fibers

A COMPARATIVE STUDY OF CELLULOSE NANOWHISKERS (cnws) AND CELLULOSE NANOFIBERS (Cnfs)

Studies on Crosslinking Dyeing of A Series of Crosslinking Dyes by A Crosslinker

Recent Progress in Regenerated Cellulose Fibers by Wet Spinning

Structure development in the condensed state of cellulose fiber regenerated from alkali complex solution

A triple-crosslinking strategy for high-performance regenerated cellulose fibers derived from waste cotton textiles

Effects of coagulating conditions on the crystallinity, orientation and mechanical properties of regenerated cellulose fibers

Effects of Glucose and Coagulant on the Structure and Properties of Regenerated Cellulose Fibers

Cellulosic fiber: mechanical fibrillation-morphology-rheology relationships

Preparation of regenerated cellulose fibers by microfluidic spinning technology using ionic liquids as the solvents

High tensile regenerated cellulose fibers via cyclic freeze-thawing enabled dissolution in phosphoric acid for textile-to-textile recycling of waste cotton fabrics

Engineering strong man-made cellulosic fibers: a review of the wet spinning process based on cellulose nanofibrils

Fabrication of regenerated cellulose fibers using phosphoric acid with hydrogen peroxide treated wheat straw in a DMAc/LiCl solvent system

Preparation and mechanical properties of regenerated cellulose/poly(vinyl-alcohol) physical composite hydrogel

Preliminary exploration of the artificial preparation, structures and properties of regenerated silk fibers

Optimization of Dry-Jet Wet Spinning of Regenerated Cellulose Fibers Using [mTBDH][OAc] as a Solvent

Preparation of carboxymethyl cellulose nanofibers and their application in warp size of textile

Enhancing the Mechanical Properties of Regenerated Cellulose through High-Temperature Pre-Gelation

Aqueous-Cellulose-Solvent-Derived Changes in Cellulose Nanocrystal Structure and Reinforcing Effects

Durable, colored and dual crosslinking networks constructed in Lyocell cellulose structure for high-quality greener textiles

Multiscale structure of cellulose microfibrils in regenerated cellulose fibers