Abstract:This study investigates the utilization of a stepped wave frequency modulation jamming technique in radar systems. The objective is to enhance the effectiveness and robustness of false target jamming in the presence of linear frequency modulation (LFM) radars employing constant false alarm rate (CFAR) detection. The proposed method combines stepped frequency modulation with full pulse delay/sum repeat jamming to enhance resilience against uncertainties in target parameters. Theoretical analysis and simulation experiments are conducted to establish relationships between key jammer parameters, such as frequency slope and power compensation, and performance metrics, like false target distribution and CFAR masking. The results demonstrate that the proposed technique effectively maintains a dense distribution of false targets surrounding the protected target, even in the presence of uncertainties in position and signal-to-noise ratio. In comparison to existing methods, the utilization of stepped-waveform modulation enables improved control over target distribution and CFAR masking. Adaptive power allocation compensates for parameter errors, thereby enhancing robustness. Simulation results reveal that the proposed approach significantly reduces the probability of detecting the true target by over 95% under uncertain conditions, while previous methods experienced degradation. The integration of stepped waveforms optimizes false target jamming, thereby advancing electronic warfare capabilities in countering advanced radar threats. This study establishes design principles for resilient jamming architectures and supports enhanced survivability against radars employing pulse compression and CFAR detection. Moreover, the concepts proposed in this study have the potential for extension to emerging radar waveforms.

Research on Low Intercepting Radar Waveform Based on LFM and Barker Code Composite Modulation

A Target Detection Scheme with Decreased Complexity and Enhanced Performance for Range-Doppler FMCW Radar.

One-bit LFMCW Radar: Spectrum Analysis and Target Detection

LPI radar waveform design based on complementary phase and discrete chaotic frequency joint coding

Integrated Communication Waveform Design for Bistatic Radar

A Modified Waveform Design for Radar-Communication Integration Based on LFM-CPM

A Waveform Design for Integrated Radar and Jamming Based on Smart Modulation and Complementary Coding

Research on the Integrated Working Mode Based on Positive and Negative Frequency Modulation in Radar Communication Integration

Radar-Communication Integration Based on MSK-LFM Spread Spectrum Signal

Waveform Design For High Speed Radar-Communication Integration

Radar Communication Integrated Waveform Design Based on OFDM and Circular Shift Sequence

Design of multi-parameter composite modulated signal for anti-deceptive jamming

A Signal Processing Practice Method Based on LFMCW Radar

Joint Radar-Communication Waveform Design Based on Composite Modulation

Intra-Pulse Frequency Coding Design for a High-Resolution Radar Against Smart Noise Jamming

Integrated Waveform for a Joint Radar-Communication System with High-Speed Transmission

An Integrated Orthogonal Frequency-Division Multiplexing Chirp Waveform Processing Method for Joint Radar and Communication Based on Low-Density Parity-Check Coding and Channel Estimation

Waveform Design for Joint Radar-Communication with Nonideal Power Amplifier and Outband Interference

Advancing Stepped-Waveform Radar Jamming Techniques for Robust False-Target Generation against LFM-CFAR Systems

Waveform Design Based ECCM Scheme Against Interrupted Sampling Repeater Jamming for Wideband MIMO Radar in Multiple Targets Scenario

Comparison of detectability of radar waveforms using a digital channelized receiver