Abstract:Visual inspections of aircraft exterior surfaces are required in aircraft maintenance routines for identifying possible defects such as dents, cracks, leaking, broken or missing parts, etc. This process is time-consuming and is also prone to error if performed manually. Therefore, it has become a trend to use mobile robots equipped with visual sensors to perform automated inspections. For such a robotic inspection, a digital model of the aircraft is usually required for planning the robot’s path, but a CAD model of the entire aircraft is usually inaccessible to most maintenance shops. It is very labor-intensive and time-consuming to generate an accurate digital model of an aircraft, or even a large portion of it, because the scanning work still must be performed manually or by a manually controlled robotic system. This paper presents a two-stage approach of automating aircraft scanning with an unmanned aerial vehicle (UAV) or autonomous drone equipped with a red–green–blue and depth (RGB-D) camera for detailed inspection or for reconstructing a digital replica of the aircraft when its original CAD model is unavailable. In the first stage, the UAV–camera system follows a predefined path far from the aircraft surface (for safety) to quickly scan the aircraft and generate a coarse model of the aircraft. Then, an optimal scanning path (much closer to the surface) in the sense of the shortest flying distance for full coverage is computed based on the coarse model. In the second stage, the UAV–camera system follows the computed path to closely inspect the surface for possible defects or scan the surface for generating a dense and precise model of the aircraft. We solved the coverage path planning (CPP) problem for the aircraft inspection or scanning using a Monte Carlo tree search (MCTS) algorithm. We also implemented the max–min ant system (MMAS) strategy to demonstrate the effectiveness of our approach. We carried out a digital experiment and the results showed that our approach can scan 70% of the aircraft surface within one hour, which is much more efficient than manual scanning.

Flying Metrology and Defect Identification for Aircraft Surface Inspection

A Novel Defect Detection System for Complex Freeform Surface Structures

Detection and Analysis of Aircraft Composite Material Structures Using UAV

Anomaly detection for industrial surface inspection: application in maintenance of aircraft components

Inspection of Aircraft Wing Panels Using Unmanned Aerial Vehicles

Visual Inspection of the Aircraft Surface Using a Teleoperated Reconfigurable Climbing Robot and Enhanced Deep Learning Technique

3D Point Cloud Analysis for Detection and Characterization of Defects on Airplane Exterior Surface

Defects Recognition Algorithm Development from Visual UAV Inspections

Automating Aircraft Scanning for Inspection or 3D Model Creation with a UAV and Optimal Path Planning

Automating Aircraft Scanning For Inspection With A UAV And Reinforcement Learning Technique

Aircraft Fuselage Corrosion Detection Using Artificial Intelligence

Deep Learning-Based Real Time Defect Detection for Optimization of Aircraft Manufacturing and Control Performance

A Novel, Non-Contact NDT Scanner Case Study: Thickness Measurement, Debonding and Defects Detection in Metallic and Composite Parts

Automated defect detection in digital radiography of aerospace welds using deep learning

Physics-informed machine learning for sensor fault detection with flight test data

Robotic Defect Inspection with Visual and Tactile Perception for Large-scale Components

Preliminary Design of an Unmanned Aircraft System for Aircraft General Visual Inspection

Built Infrastructure Monitoring and Inspection Using UAVs and Vision-based Algorithms

Fault Detection in Power Equipment via an Unmanned Aerial System Using Multi Modal Data

Technology for the Visual Inspection of Aircraft Surfaces Using Programmable Unmanned Aerial Vehicles

A Deep-Learning-Based Approach for Aircraft Engine Defect Detection