Abstract:In recent years, the rapid development of the new energy vehicle industry has led to an increase in the production of used lithium-ion batteries. The recycling of waste lithium-ion batteries is expected to alleviate the shortage of valuable metals in battery materials. The electrode material is adhered to the collector by a viscous organic binder such as PVDF. A key step in recycling is to separate the anode material and aluminum foil from the waste lithium batteries to obtain materials rich in valuable metals. Compared with chemical dissolution and decomposition, pyrolysis pretreatment is a simple and feasible method. By reducing the binding force between the binder and the positive active substance at a high temperature, organic matter can be eliminated by thermal decomposition at a high temperature. At the same time, the organic component of PVDF has a high calorific value, and the energy can be recycled and reused, which can save energy. The pyrolysis process and pyrolysis behavior of spent LIBs materials were studied in this paper. FWO, Friedman and KAS conversion methods were spent to compare the pyrolysis kinetics of positive electrode materials. Thermogravimetric analysis shows that the cathode material is decomposed into three stages with mass losses of 1.7%, 1.2% and 3.3%, respectively. The activation energy (Eα) calculated by the three model-free methods is best fitted by the FWO method. During the pyrolysis process, the concentration of F decreases gradually with the increase in temperature, and the concentrations of Ni, Mn, Co and Li remain stable. Most of the harmful element (F) in spent LIBs is converted into HF gas, which can be adsorbed by alkaline solution. The analysis of pyrolysis kinetics and pyrolysis products is of great significance for large-scale pretreatment of spent lithium-ion batteries.

Research on Thermogravimetric-Differential Scanning Calorimeter of Spent Lithium Iron Phosphate Batteries Cathode Plate

Environment-friendly technology for recovering cathode materials from spent lithium iron phosphate batteries

Recovery of cathode materials from waste lithium iron phosphate batteries through ultralow temperature treatment and mechanical separation

Pyrolysis characteristics of cathode from spent lithium-ion batteries using advanced TG-FTIR-GC/MS analysis

Spent lithium-ion battery recycling: Process optimization and carbon footprint analysis based on thermal mechanical force

Short-term and High-performance Recycling of Cathode Material from Spent Lithium Ion Batteries

Study on Pyrolysis Pretreatment Characteristics of Spent Lithium-Ion Batteries

Eddy current separation for recovering aluminium and lithium-iron phosphate components of spent lithium-iron phosphate batteries

Environment-friendly, efficient process for mechanical recovery of waste lithium iron phosphate batteries

Study on Metal Recovery Process and Kinetics of Oxidative Leaching from Spent LiFePO4 Li-batteries

Characterization and Thermal Treatment of the Black Mass from Spent Lithium-Ion Batteries

A Facile Route for the Efficient Leaching, Recovery, and Regeneration of Lithium and Iron from Waste Lithium Iron Phosphate Cathode Materials

Sustainable reprocessing of lithium iron phosphate batteries: A recovery approach using liquid-phase method at reduced temperature

Advances in the Separation of Graphite from Lithium Iron Phosphate from End-of-Life Batteries Shredded Fine Fraction Using Simple Froth Flotation

Effects of electrolyte/cathode ratio on investigation of their thermal behaviors using differential scanning calorimetry

Hydrometallurgical recovery of lithium carbonate and iron phosphate from blended cathode materials of spent lithium-ion battery

Thermal treatment process for the recovery of valuable metals from spent lithium-ion batteries

High-efficiency leaching process for selective leaching of lithium from spent lithium iron phosphate

An entire recycling of spent Al-bearing cathode powder as giniite sphere and lithiophophate plate with leaching-hydrothermal-precipitation process

Towards Sustainable Direct Recycling: Unraveling Structural Degradation Induced by Thermal Pretreatment of Lithium-Ion Battery Electrodes

Selective Recovery of Cathode Materials from Spent Lithium-Ion Battery Material with a Near-Room-Temperature Separation