Abstract:In this study, a new electrochemical sensor was developed for the detection of cefalexin (CFX), based on the use of a molecularly imprinted polymer (MIP) obtained by electro‒polymerization in an aqueous medium of indole-3-acetic acid (I3AA) on a glassy carbon electrode (GCE) and on boron-doped diamond electrode (BDDE). The two different electrodes were used in order to assess how their structural differences and the difference in the potential applied during electrogeneration of the MIP translate to the performances of the MIP sensor. The quantification of CFX was performed by using the electrochemical signal of a redox probe before and after the rebinding of the template. The modified electrode was characterized using atomic force microscopy (AFM), scanning electron microscopy (SEM), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The influence of different parameters on the fabrication of the sensor was tested, and the optimized method presented high selectivity and sensitivity. The MIP-based electrode presented a linear response for CFX concentration range of 10 to 1000 nM, and a limit of detection of 3.2 nM and 4.9 nM was obtained for the BDDE and the GCE, respectively. The activity of the sensor was successfully tested in the presence of some other cephalosporins and of other pharmaceutical compounds. The developed method was successfully applied to the detection of cefalexin from real environmental and pharmaceutical samples.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to develop an electrochemical sensor capable of sensitive and selective detection of cefalexin (CFX). Specifically, the researchers aim to achieve high - sensitivity and high - selectivity detection of CFX through molecularly imprinted polymer (MIP) technology combined with electrochemical methods. ### Problem Background The overuse and abuse of antibiotics have led to the development of antibiotic resistance, which has become one of the most serious public health problems today. Cefalexin is a commonly used β - lactam antibiotic, belonging to the first - generation cephalosporins, and is widely used in the treatment of diseases such as respiratory tract infections, pneumonia, and urinary tract infections. However, its residues in the environment may cause health problems, such as allergic reactions and broad - spectrum antibiotic resistance. Therefore, there is an urgent need to develop rapid and selective antibiotic detection methods. ### Research Objectives The objective of this paper is to develop an electrochemical sensor based on molecularly imprinted polymers for the detection of cefalexin. Specific objectives include: 1. **Improve selectivity and sensitivity**: Ensure the selectivity and sensitivity of the sensor to cefalexin by using molecularly imprinted polymers (MIP). 2. **Optimize sensor performance**: Evaluate the influence of different electrode materials (such as glassy carbon electrode GCE and boron - doped diamond electrode BDDE) and electropolymerization conditions on sensor performance. 3. **Verify practical applications**: Apply the developed sensor to actual environmental and drug samples to verify its effectiveness and reliability. ### Solutions The researchers selected indole - 3 - acetic acid (I3AA) as a monomer and prepared MIP on GCE and BDDE by electropolymerization. The formation process of MIP includes the following steps: 1. **Electrode pretreatment**: Polish the electrode with a 0.05 µm alumina suspension and rinse it with ultrapure water. 2. **MIP electropolymerization**: Immerse the electrode in a phosphate buffer solution containing I3AA and CFX and perform cyclic voltammetry (CV) electropolymerization. 3. **Template removal**: Remove the template molecule CFX by soaking in methanol, 0.1 M NaOH or PBS. 4. **Sensor characterization**: Characterize the modified electrode using atomic force microscopy (AFM), scanning electron microscopy (SEM), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). 5. **Detection performance evaluation**: Evaluate the sensor's response to CFX by measuring the current change in potassium ferricyanide solution through differential pulse voltammetry (DPV). Finally, the sensor exhibited a linear response in the CFX concentration range of 10 to 1000 nM, and the detection limits of BDDE and GCE were 3.2 nM and 4.9 nM, respectively. In addition, the sensor still showed good selectivity and low interference in the presence of other antibiotics and drug compounds. In conclusion, this study successfully developed an MIP - based electrochemical sensor that can sensitively and selectively detect cefalexin, providing a new tool for antibiotic pollution monitoring.

Electrochemical Sensor Based on Molecularly Imprinted Polymer for the Detection of Cefalexin

Nanomaterial-assisted molecularly imprinted polymer strategies for highly sensitive and selective determination of cefdinir and its validation using computational approach

High-peformance Bimetallic SPR Sensor for Ciprofloxacin Based on Molecularly Imprinted Polymer

Enhanced Ceftriaxone Determination using a Glassy Carbon Electrode Modified with a Cr‐based Metal‐Organic Framework Film Stabilized by β‐Cyclodextrin Polymer

Electrochemical Nano-Imprinting of Trimetallic Dendritic Surface for Ultrasensitive Detection of Cephalexin in Pharmaceutical Formulations

Surface plasmon resonance sensor for antibiotics detection based on photo-initiated polymerization molecularly imprinted array.

Molecularly Imprinted Polymer Functionalized on Reduced Graphene Oxide Electrochemical Sensor for Detection of Ciprofloxacin

Modified solid-contact sensors for determination of cefuroxime and cefalexin in medicines and oral fluid

A molecularly imprinted electrochemical sensor with dual functional monomers for selective determination of gatifloxacin

Electrochemical Sensor Based on the Hierarchical Carbon Nanocomposite for Highly Sensitive Ciprofloxacin Determination

Rapid and Sensitive Electrochemical Assay of Cefditoren with MWCNT/Chitosan NCs/Fe2O3 as a Nanosensor

Modified Planar Sensors for Determination of Cefepime

Electrochemical immunosensor based on carboxylated single‐walled carbon nanotube‐chitosan functional layer for the detection of cephalexin

Harnessing Graphene-Modified Electrode Sensitivity for Enhanced Ciprofloxacin Detection

Nano-optosensor based on titanium dioxide and graphene quantum dots composited with specific polymer for cefazolin detection

Ultra-sensitive Detection of Ciprofloxacin Hydrochloride in Milk by Molecularly Imprinted Electrochemical Sensor Based on S-CoFe-MOFs/AuNPs

A novel N-CNDs/PAni modified molecular imprinted polymer for ultraselective and sensitive detection of ciprofloxacin in lentic ecosystems: a dual responsive optical sensor

β-Cyclodextrin carbon nanotube-enhanced sensor for ciprofloxacin detection

Low Cost, Easy to Prepare and Disposable Electrochemical Molecularly Imprinted Sensor for Diclofenac Detection

Au-PDA@SiO2 core-shell nanospheres decorated rGO modified electrode for electrochemical sensing of cefotaxime

A bifunctional electrochemical sensor for simultaneous determination of electroactive and non-electroactive analytes: A universal yet very effective platform serving therapeutic drug monitoring