Abstract:Metal-organic frameworks (MOFs) have been investigated with regard to the oxygen evolution reaction (OER) due to their structure diversity, high specific surface area, adjustable pore size, and abundant active sites. However, the poor conductivity of most MOFs restricts this application. Herein, through a facile one-step solvothermal method, the Ni-based pillared metal-organic framework [Ni2(BDC)2DABCO] (BDC = 1,4-benzenedicarboxylate, DABCO = 1,4-diazabicyclo[2.2.2]octane), its bimetallic nickel-iron form [Ni(Fe)(BDC)2DABCO], and their modified Ketjenblack (mKB) composites were synthesized and tested toward OER in an alkaline medium (KOH 1 mol L−1). A synergistic effect of the bimetallic nickel-iron MOF and the conductive mKB additive enhanced the catalytic activity of the MOF/mKB composites. All MOF/mKB composite samples (7, 14, 22, and 34 wt.% mKB) indicated much higher OER performances than the MOFs and mKB alone. The Ni-MOF/mKB14 composite (14 wt.% of mKB) demonstrated an overpotential of 294 mV at a current density of 10 mA cm−2 and a Tafel slope of 32 mV dec−1, which is comparable with commercial RuO2, commonly used as a benchmark material for OER. The catalytic performance of Ni(Fe)MOF/mKB14 (0.57 wt.% Fe) was further improved to an overpotential of 279 mV at a current density of 10 mA cm−2. The low Tafel slope of 25 mV dec−1 as well as a low reaction resistance due to the electrochemical impedance spectroscopy (EIS) measurement confirmed the excellent OER performance of the Ni(Fe)MOF/mKB14 composite. For practical applications, the Ni(Fe)MOF/mKB14 electrocatalyst was impregnated into commercial nickel foam (NF), where overpotentials of 247 and 291 mV at current densities of 10 and 50 mA cm−2, respectively, were realized. The activity was maintained for 30 h at the applied current density of 50 mA cm−2. More importantly, this work adds to the fundamental understanding of the in situ transformation of Ni(Fe)DMOF into OER-active α/β-Ni(OH)2, β/γ-NiOOH, and FeOOH with residual porosity inherited from the MOF structure, as seen by powder X-ray diffractometry and N2 sorption analysis. Benefitting from the porosity structure of the MOF precursor, the nickel-iron catalysts outperformed the solely Ni-based catalysts due to their synergistic effects and exhibited superior catalytic activity and long-term stability in OER. In addition, by introducing mKB as a conductive carbon additive in the MOF structure, a homogeneous conductive network was constructed to improve the electronic conductivity of the MOF/mKB composites. The electrocatalytic system consisting of earth-abundant Ni and Fe metals only is attractive for the development of efficient, practical, and economical energy conversion materials for efficient OER activity.

Electrochemical Synthesis of NiBTC Metal Organic Framework Thin Layer on Nickel Foam: An Efficient Electrocatalyst for the Hydrogen Evolution Reaction

Composition-Balanced Bi-Metallic MOFs Directly Grown on Nickel Foam for High-Efficiency Oxygen Evolution Reaction

Hollow Ni/NiO/C composite derived from metal-organic frameworks as a high-efficiency electrocatalyst for the hydrogen evolution reaction

Metal-organic framework derived Ni/Mo2C/Mo2TiC2Tx@NC as an efficient electrocatalyst for enhanced hydrogen production

Electrodeposition of self-supported Ni-Mo-P film on Ni foam as an affordable and high-performance electrocatalyst toward hydrogen evolution reaction

Nanostructured NiCo2S4@NiCo2O4-reduced Graphene Oxide As an Efficient Hydrogen Evolution Electrocatalyst in Alkaline Electrolyte.

Water-regulated 2D Ni-MOF-derived heat-sheared Nano-Ni@TC for efficient hydrogen evolution

Cu based Metal Organic Framework (Cu-MOF) for electrocatalytic hydrogen evolution reaction

Low-temperature Synthesis of NiS/MoS2/C Nanowires/nanoflakes As Electrocatalyst for Hydrogen Evolution Reaction in Alkaline Medium Via Calcining/sulfurizing Metal-Organic Frameworks

Metal Organic Framework Derived Ni0.15Co0.85S2@MoS2 Heterostructure As an Efficient and Stable Electrocatalyst for Hydrogen Evolution

MOF-derived surface modified Ni nanoparticles as an efficient catalyst for the hydrogen evolution reaction

2D TiVCTx layered nanosheets grown on nickel foam as highly efficient electrocatalysts for the hydrogen evolution reaction

Two Birds with One Stone: Metal–Organic Framework Derived Micro‐/Nanostructured Ni2P/Ni Hybrids Embedded in Porous Carbon for Electrocatalysis and Energy Storage

Three-Dimensional N-Doped Carbon Nanotube Frameworks on Ni Foam Derived from a Metal-Organic Framework as a Bifunctional Electrocatalyst for Overall Water Splitting

Hydrophilic/Aerophobic Hydrogen-Evolving Electrode: NiRu-Based Metal–Organic Framework Nanosheets In Situ Grown on Conductive Substrates

Hierarchical construction of hollow NiCo2S4 nanotube@NiCo2S4 nanosheet arrays on Ni foam as an efficient and durable electrocatalyst for hydrogen evolution reaction

Impact of an Incompatible Atomic Nickel-Incorporated Metal–Organic Framework on Phase Evolution and Electrocatalytic Activity of Ni-Doped Cobalt Phosphide for the Hydrogen Evolution Reaction

A polyhedral Ni/Cu bimetallic metal-organic framework for electrocatalytic oxygen evolution reaction

Preparation of an Fe2Ni MOF on Nickel Foam As an Efficient and Stable Electrocatalyst for the Oxygen Evolution Reaction

Fabrication of nickel nanoparticles anchored on a 2D double transition metal MXene for efficient hydrogen and oxygen evolution reactions

Synthesis of Ketjenblack Decorated Pillared Ni(Fe) Metal-Organic Frameworks as Precursor Electrocatalysts for Enhancing the Oxygen Evolution Reaction