Abstract:Glasses, which date back to about 2500 BC, originated in Mesopotamia and were later brought to Egypt in approximately 1450 BC. In contrast to the long-range order materials (crystalline materials), the atoms and molecules of glasses, which are noncrystalline materials (short-range order) are not organized in a definite lattice pattern. Metallic glassy materials with amorphous structure, which are rather new members of the advanced materials family, were discovered in 1960. Due to their amorphous structure, metallic glassy alloys, particularly in the supercooled liquid region, behave differently when compared with crystalline alloys. They reveal unique and unusual mechanical, physical, and chemical characteristics that make them desirable materials for many advanced applications. Although metallic glasses can be produced using different techniques, many of these methods cannot be utilized to produce amorphous alloys when the system has high-melting temperature alloys (above 1500 °C) and/or is immiscible. As a result, such constraints may limit the ability to fabricate high-thermal stable metallic glassy families. The purpose of this research is to fabricate metallic glassy (Zr70Ni25Al5)100-xWx (x; 0, 2, 10, 20, and 35 at. %) by cold rolling the constituent powders and then mechanically alloying them in a high-energy ball mill. The as-prepared metallic glassy powders demonstrated high-thermal stability and glass forming ability, as evidenced by a broad supercooled liquid region and a high crystallization temperature. The glassy powders were then consolidated into full-dense bulk metallic glasses using a spark plasma sintering technique. This consolidation method did not result in the crystallization of the materials, as the consolidated buttons retained their short-range order fashion. Additionally, the current work demonstrated the capability of fabricating very large bulk metallic glassy buttons with diameters ranging from 20 to 50 mm. The results indicated that the microhardness of the synthesized metallic glassy alloys increased as the W concentration increased. As far as the authors are aware, this is the first time this metallic glassy system has been reported.

Shockwave Consolidation to Create Bulk Metallic Glass

Progress in Consolidation of Amorphous Zr-based Powder into Bulk Metallic Glass

Crystallization-aided extraordinary plastic deformation in nanolayered crystalline Cu/amorphous Cu-Zr micropillars

Synthesis of Bulk Zr48Cu36Al8Ag8 Metallic Glass by Hot Pressing of Amorphous Powders

Phase Transformations from Nanocrystalline to Amorphous (Zr70Ni25Al5)100-xWx (x; 0, 2, 10, 20, 35 at. %) and Subsequent Consolidation

High-Throughput Synthesis and Characterization Screening of Mg-Cu-Y Metallic Glass

Consolidation Behavior of Cu-Zr-Al Metallic Glass Powder by Spark Plasma Sintering

Preparation of Thermo-Stable Bulk Metallic Glass of Nd 60 Cu 20 Ni 10 Al 10 by Rapid Compression

Additive Manufactured Large Zr-Based Bulk Metallic Glass Composites with Desired Deformation Ability and Corrosion Resistance

Applied Pressure on Altering the Nano-Crystallization Behavior of Al86Ni6Y4.5Co2La1.5Metallic Glass Powder During Spark Plasma Sintering and Its Effect on Powder Consolidation

Synthesis of Highly Amorphous Fe 70 Ti 2 Y 6 B 22 Bulk Alloy with Excellent Thermal Stability by Isothermal Compression under High Pressure

Influence of powder characteristics on the structural and the mechanical properties of additively manufactured Zr-based bulk metallic glass

Influence of Spark Plasma Sintering Parameters on the Mechanical Properties of Cu50Zr45Al5 Bulk Metallic Glass Obtained Using Metallic Glass Powder

Partial crystallization in a Zr-based bulk metallic glass in selective laser melting

Flash Joule heating for ductilization of metallic glasses

Zr-based Bulk Metallic Glass Composite with in Situ Precipitated Nanocrystals

General route to fabricate ultrafine metallic glass powders directly from their own crystalline states by localized pulsed electrical discharge atomization

High-strength Al 87 Ni 8 La 5 bulk alloy produced by spark plasma sintering of gas atomized powders

Atomic-Scale Bonding of Bulk Metallic Glass to Crystalline Aluminum

The Crystallization Mechanism of Zr-Based Bulk Metallic Glass during Electron Beam Remelting

Synthesis of Amorphous/Crystalline Laminated Metals via Accumulative Roll Bonding