Abstract:In this paper, a wavelet convolutional neural network (WNN) consisting of a one-dimensional (1D) convolutional neural network and a self-adaptive wavelet neural network has been proposed and demonstrated experimentally for temperature measurement in a Brillouin optical time domain reflectometry (BOTDR) system. Based on the analysis of the system noise, it follows the Gaussian white noise distribution along the time-related sensing distance. The impact of the noise in time-domain on the measured Brillouin gain spectra (BGSs) could be neglected, so that the BGSs in the fiber can be regarded as a series of 1D input data of the proposed WNN. Different self-adaptive wavelet activation functions connected to each output of the full-connection network are adopted to realize the multi-scaled analysis and the scale translation, which can obtain more local characteristics in frequency-domain. The output extracted by the WNN is Brillouin frequency shift (BFS), which presents linearity correlation to the actual temperature. Considering the multi-parameters including different frequency ranges, signal-to-noise-ratios (SNRs), BFSs and spectral widths (SWs), a general model of the proposed WNN is trained to handle more extreme cases, in which it doesn't require retraining for different single-mode (SM) optical fibers in BOTDR sensing system. The performances of the WNN are compared with other two techniques, the Lorentzian curve fitting based on Levenberg-Marquardt (LM) algorithm and the basic neural network (NN) containing input and output layers together with two hidden layers. Both the simulated and measured results show that the WNN has better robustness and flexibility than the LM and the NN. Besides, the computational accuracy of the WNN is improved and the fluctuation of that is slighter, especially when the SNR is less than 11 dB. Moreover, the WNN takes approximately 0.54 s to measure the temperature from the 18,000 collected BGSs transmitted through the 18 km SM optical fiber. The calculating time of the WNN is greatly reduced by three orders of magnitude in comparison with that of the LM, and is comparable to that of the NN. It proves that the proposed WNN may provide a feasible or even better scheme for the robust and fast temperature measurement in BOTDR system.

Noise suppression for weak current measurement based on neural-network-assisted UHV FOCS

Short-time and weak signal demodulation for fiber optic current sensors based on backpropagation neural network

Two-Step Non-Intrusive Load Monitoring Based on High-Frequency Current Data

Worst-case Power Integrity Prediction Using Convolutional Neural Network.

Worst-Case Dynamic Power Distribution Network Noise Prediction Using Convolutional Neural Network

Nonlinearity Compensation of Magneto-Optic Fiber Current Sensors Based on WOA-BP Neural Network

Weak Signal Detection Based on United Denoising and Frequency Modulation

Artificial Neural Network Compensation for an Optical Fiber Temperature Sensing System Based on Optical Time Offset

Low-frequency environmental magnetic noise elimination based on a neural network algorithm for TMR sensor arrays

Wavelet Convolutional Neural Network for Robust and Fast Temperature Measurements in Brillouin Optical Time Domain Reflectometry.

Noise suppression method for OPGW transmission line galloping monitoring by using adjacent FBG sensors

FM-FCN: A Neural Network with Filtering Modules for Accurate Vital Signs Extraction

A Novel Neural Network Approach for Power System Low Frequency Oscillation Mode Identification

Ultra-low noise phase measurement of fiber optic sensors via weak value amplification

Application of FIR Real-Time Filtering in Fiber-Optic Current Sensor

Crosstalk Noise Suppressed for Multi-frequency φ-OTDR Using Compressed Sensing

Noise Reduction of Partial Discharge in Power Cable Insulation Based on Deep Learning

GA-BP-Based Low-Noise FBG Hydroacoustic Monitoring System with Reference Sensor

Common-Mode Noise Suppression Technique in Interferometric Fiber-Optic Sensors

Long short‐term memory‐based robust and qualitative modal feature identification of non‐stationary low‐frequency oscillation signals in power systems

Weak Current Detection Based On The Faims System