Abstract:Purpose This research outlines the development and characterization of advanced composite materials and their potential applications in the aerospace industry for interior applications. Advanced composites, such as carbon-fiber-reinforced polymers and ceramic matrix composites, offer significant advantages over traditional metallic materials in terms of weight reduction, stiffness and strength. These materials have been used in various aerospace applications, including aircraft, engines and thermal protection systems. Design/methodology/approach The development of design of experiment–based hybrid aluminum composites using the stir-casting technique has further enhanced the performance and cost-effectiveness of these materials. The design of the experiment was followed to fabricate hybrid composites with nano cerium oxide (nCeO 2 ) and graphene nanoplatelets (GNPs) as reinforcements in the Al-6061 matrix. Findings The Al6061 + 3% nCeO2 + 3% GNPs exhibited a high hardness of 119.6 VHN. The ultimate tensile strength and yield strength are 113.666 MPa and 73.08 MPa, respectively. A uniform distribution of reinforcement particulates was achieved with 3 Wt.% of each reinforcement in the matrix material, which is analyzed using scanning electron microscopy. Fractography revealed that brittle and ductile fractures caused the failure of the fractured specimens in the tensile test. Practical implications The manufactured aluminum composite can be applied in a range of exterior and interior structural parts like wings, wing boxes, motors, gears, engines, antennas, floor beams, etc. The fan case material of the GEnx engine (currently using carbon-fiber reinforcement plastic) for the Boeing 7E7 can be another replacement with manufactured hybrid aluminum composite, which predicts weight savings per engine of close to 120 kg. Originality/value The development of hybrid reinforcements, where two or more types of reinforcements are used in combination, is also a novel approach to improving the properties of these composites. Advanced composite materials are known for their high strength-to-weight ratio. If the newly developed composite material demonstrates superior properties, it can potentially be used to replace traditional materials in aircraft manufacturing. By reducing the weight of aircraft structures, fuel efficiency can be improved, leading to reduced operating costs and environmental impact. This allows for a more customized solution for specific application requirements and can lead to further advancements in materials science and technology.

Functional Polymer Matrix Composites for Structural and Stealth Applications

The Effect of Chopped Carbon Fiber on Morphology, Electromagnetic, and Mechanical Properties of Glass/Epoxy Composites for Aerospace Application

Comparative Study of the Mechanical and Water Absorption Behaviour of Basalt Fiber Reinforced Polymer Matrix Composites with Different Epoxies as Matrix for Biomedical Applications

Performance Assessment of Nanofiber Integrated Polymer Composite as Electromagnetic Wave Absorber

Development of a Wire Mesh Composite Material for Aerospace Applications

Eco‐friendly recycled glass fiber and bamboo fiber reinforced epoxy‐SiO2 polymer hybrid composite: Development and mechanical characterization

Development of milled carbon fibre-based GFRP composites and their effect on microwave and structural properties

Production of Metamaterial-Based Radar Absorbing Material for Stealth Technology

Study of Numerous Resins Used in Polymer Matrix Composite Materials

Cognizant Fiber-Reinforced Polymer Composites Incorporating Seamlessly Integrated Sensing and Computing Circuitry

Polymer and ceramic nanocomposites for aerospace applications

Novel radar absorbing material using resistive frequency selective surface based polymer composites for enhanced broadband microwave absorption

Recent developments in RAM based MWCNT composite materials: A short review

Synthesis and characterization of DOE-based stir-cast hybrid aluminum composite reinforced with graphene nanoplatelets and cerium oxide

Development of Low Density, Heat Resistant and Broadband Microwave Absorbing Materials (MAMs) for Stealth Applications

Evaluation of mechanical and water absorption properties of kevlar/carbon/basalt fibers reinforced nano cellulose particulates Bisphenol-F LY556 epoxy composite

Mechanical and Material Characterization of 3d Printed Continuous Fiber Reinforced Photopolymer Matrix Composites

Mechanical (Static and Dynamic) Characterization and Thermal stability of hybrid green composites for Engineering Applications

Design, Development, and Characterization of Advanced Textile Structural Hollow Composites

Synthesis and Characterization of Carbon Nanofiber with Reinforced Polymer Resin Matrix Composite

Fabrication and Experimental Estimation of Mechanical Properties of Kevlar-Glass/Epoxy Interwoven Composite Laminate