Abstract:Computer vision in the structural health monitoring (SHM) field has become popular, especially for processing unmanned aerial vehicle (UAV) data, but still has limitations both in experimental testing and in practical applications. Prior works have focused on UAV challenges and opportunities for the vibration-based SHM of buildings or bridges, but practical and methodological gaps exist specifically for linear infrastructure systems such as pipelines. Since they are critical for the transportation of products and the transmission of energy, a feasibility study of UAV-based SHM for linear infrastructures is essential to ensuring their service continuity through an advanced SHM system. Thus, this study proposes a single UAV for the seismic monitoring and safety assessment of linear infrastructures along with their computer vision-aided procedures. The proposed procedures were implemented in a full-scale shake-table test of a natural gas pipeline assembly. The objectives were to explore the UAV potential for the seismic vibration monitoring of linear infrastructures with the aid of several computer vision algorithms and to investigate the impact of parameter selection for each algorithm on the matching accuracy. The procedure starts by adopting the Maximally Stable Extremal Region (MSER) method to extract covariant regions that remain similar through a certain threshold of image series. The feature of interest is then detected, extracted, and matched using the Speeded-Up Robust Features (SURF) and K-nearest Neighbor (KNN) algorithms. The Maximum Sample Consensus (MSAC) algorithm is applied for model fitting by maximizing the likelihood of the solution. The output of each algorithm is examined for correctness in matching pairs and accuracy, which is a highlight of this procedure, as no studies have ever investigated these properties. The raw data are corrected and scaled to generate displacement data. Finally, a structural safety assessment was performed using several system identification models. These procedures were first validated using an aluminum bar placed on an actuator and tested in three harmonic tests, and then an implementation case study on the pipeline shake-table tests was analyzed. The validation tests show good agreement between the UAV data and reference data. The shake-table test results also generate reasonable seismic performance and assess the pipeline seismic safety, demonstrating the feasibility of the proposed procedure and the prospect of UAV-based SHM for linear infrastructure monitoring.

Autonomous wireless sensor deployment with unmanned aerial vehicles for structural health monitoring applications

TECHNIQUES FOR CONTACT-BASED STRUCTURAL HEALTH MONITORING WITH MULTIROTOR UNMANNED AERIAL VEHICLES

Vision-based displacement measurement using an unmanned aerial vehicle

Remote Placement of Magnetically Coupled Ultrasonic Sensors for Structural Health Monitoring

Impedance-Based Non-Destructive Testing Method Combined with Unmanned Aerial Vehicle for Structural Health Monitoring of Civil Infrastructures

Autonomous Ultrasonic Inspection Using Unmanned Aerial Vehicle

Built Infrastructure Monitoring and Inspection Using UAVs and Vision-based Algorithms

Evaluating Unmanned Aerial Vehicles for Vibrational Analysis: Exploiting Integrated Capabilities of Nano-Drones as Nodes in a WSN

Autonomous UAV for Building Monitoring, Detection and Localisation of Faults

Sensor-driven area coverage for an autonomous fixed-wing unmanned aerial vehicle

Implementation and Evaluation of an Autonomous Airborne Ultrasound Inspection System

Intelligent Structural Health Monitoring and Noncontact Measurement Method of Small Reservoir Dams Using Uav Photogrammetry and Anomaly Detection

Sensor Equipped UAS for Non-Contact Bridge Inspections: Field Application

Localization, Planning, and Control of a UAV for Rapid Complete Coverage Bridge Inspection in Large-Scale Intermittent GPS Environments

Efficient Aerial Data Collection with UAV in Large-Scale Wireless Sensor Networks

A Vision-Based Motion Control Framework for Water Quality Monitoring Using an Unmanned Aerial Vehicle

Joint Data Collection and Sensor Positioning in Multi-UAV-Assisted Wireless Sensor Network

An Integrated UWB-IMU-Vision Framework for Autonomous Approaching and Landing of UAVs

Unmanned Aerial Vehicle-Based Structural Health Monitoring and Computer Vision-Aided Procedure for Seismic Safety Measures of Linear Infrastructures

Deployment of Contact-Based Ultrasonic Thickness Measurements Using Over-Actuated UAVs

Cross-Correlation-Based Structural System Identification Using Unmanned Aerial Vehicles