Abstract:The concentric face gear split-torque transmission system (CFGSTTS) has the advantages of a large reduction ratio and high power density. The CFGSTTS has considerable potential to be applied in helicopter main reducers. As such, in this study, we analyzed the load distribution characteristics of a dual input–dual output concentric face gear split-torque transmission system. A load-dependent time-varying meshing stiffness surrogate model was designed based on a feedforward neural network. The difference in the meshing stiffness between the pinion driving and face gear driving was analyzed. The coupled lumped parameter dynamic model of the bending–torsion–axis–pendulum was developed through Newton’s second law, and the influences of the time-varying meshing stiffness, backlash, comprehensive transmission error, support stiffness, and damping were considered. Finally, the impact of the support stiffness on the load-sharing coefficient was analyzed. An optimization model was constructed with the objective function of minimizing the sum of the load-sharing coefficients and was solved by the marine predator algorithm. In addition, the validity of the optimization results was verified with a finite element model. The results indicate that (1) smaller support stiffnesses of input gears benefit the corresponding load balance; (2) the support stiffnesses of the face gears have different laws of influence on the load-sharing coefficient at the input gear and idler, and the support stiffnesses of the other gears need to be comprehensively considered; (3) the larger supporting stiffnesses of the idler gears and tail gear are beneficial for decreasing the load-sharing coefficient at the input gear; and (4) the optimized load-sharing coefficients at Input Gears 1 and 2 and the idler gear decrease by 23.7%, 24.2%, and 4.6%, respectively.

An Energy-Based Load Distribution Approach for the Application of Gear Mesh Stiffness on Elastic Bodies

A Global Iterative Model for Mesh Stiffness and Mesh Force Estimation of Flexible Internal Meshing in Spur Planetary Gear Sets

An improved numerical method for the mesh stiffness calculation of spur gears with asymmetric teeth on dynamic load analysis

Calculation of gear mesh stiffness and loaded tooth contact analysis based on ease-off surface topology

Dynamics Analysis of Spur Gears Considering Random Surface Roughness with Improved Gear Body Stiffness

Mesh stiffness calculation using an accumulated integral potential energy method and dynamic analysis of helical gears

A New Fast Calculating Method for Meshing Stiffness of Faulty Gears Based on Loaded Tooth Contact Analysis

Gear design optimization: Stiffness versus dynamics

A novel energy-based numerical method for solving planet load sharing model considering elastic ring gear

Nonlinear dynamics of hypoid gear with coupled dynamic mesh stiffness

A Study on the Dynamic Behaviour of Lightweight Gears

Spur Gears Static and Dynamic Meshing Simulation and Tooth Stress Calculation

Determination of Mesh Stiffness of Gear—Analytical Approach vs. FEM Analysis

Meshing Stiffness Analysis of Gear Using the Ishikawa Method

The Analysis and Modeling of the Synthetical Meshing Stiffness of Inner Gearing considering the Flexible Inner Ring Gear

Nonlinear mesh stiffness model using slice coupling for straight bevel gear considering axial mesh force component and extended tooth contact

Dynamics Modeling and Load-Sharing Performance Optimization of Concentric Face Gear Split-Torque Transmission Systems

A time‐varying meshing stiffness model for gears with mixed elastohydrodynamic lubrication based on load‐sharing

A New Integrated Approach for the Prediction of the Load Independent Power Losses of Gears: Development of a Mesh-Handling Algorithm to Reduce the CFD Simulation Time

Research on gear mesh stiffness of helical gear based on combining contact line analysis method

Contact Finite Element Method for Dynamic Meshing Characteristics Analysis of Continuous Engaged Gear Drives