Abstract:With the depletion of river sand and the rising price of quartz sand, more and more researchers are trying to use manufactured sand to prepare ultra-high performance concrete (UHPC). However, due to the large amount of fine particles and high water demand, few studies are available to directly use the manufactured sand in its original state to prepare UHPC. To overcome the above problems, in this study, two locally available recycled manufactured sands are used as aggregates, and an attempt is made to maximize the use of their original gradation to prepare a cleaner construction production integrating high flowability, excellent mechanical per-formance, high cost-effective and environmentally-friendly property that meets the engineering requirements. The properties of workability, mechanical strengths, volume stability, hydration degree, pore structures, morphology of interfacial transition zone (ITZ), carbon emission and production cost are evaluated and dis-cussed. Results indicate that all the mixtures prepared in this study can be considered to have high flowability except when granite sand is completely used. The mixture containing 75% tuff sand can even reach a compressive strength of 166.2 MPa, which is 10.5% higher than the reference one. A reduction of 28.9% can be observed in the early-age autogenous shrinkage of tuff sand UHPC as compared to the reference specimen. The mercury intrusion porosimetry (MIP) and X-ray computed tomography (X-CT) results demonstrate that the micropore volume, porosity and number of mesopores of UHPC increase to a certain extent when manufactured sand is utilized. The scanning electron microscope (SEM) observation reveals the most compact ITZ between cement paste and waste tuff sand. Additionally, the recycled manufactured sand UHPC can diminish the carbon emission of 19 kg and the cost of 27.4% (granite sand) and 25.5% (tuff sand) per cubic meter, showing excellent environmental and economical benefits.

Application of titania from Ti-Salt flocculated sludge for UHPC

Feasibility Study on Preparing Economical and Environmentally-Friendly High-Flowability Ultra-High Performance Cementitious Composites with Original Graded Stone Powder Free Recycled Manufactured Sands

Effects of HPC on the Microstructure and Hydrophilicity of Sol–gel-Derived TiO2 Films

Application of Supported TiO2 in Carbonated Binding Material and Its Photocatalytic Performance

Studies of the microstructure and optical property of TiO2 films modified by HPC

Mechanism investigation of influence of HPC on the microstructure of TiO2 films

Titania Polyhedra Via Sodium Fluorotitanate Intermediates

Study on the Utilization of Iron Tailings in Ultra-High-Performance Concrete: Fresh Properties and Compressive Behaviors

SiO2/TiO2 and PDMS modified self-cleaning coating and its application in decorative UHPC surface

Influence of Titanium Dioxide Nanoparticles on the Sulfate Attack upon Ordinary Portland Cement and Slag-Blended Mortars

Production of carbon-doped titanium dioxide (C–TiO2) from polytitanium-coagulated sludge as an adsorbent or photocatalyst for pollutant removals

Mechanical and Drying Shrinkage Performance Study of Ultra-High-Performance Concrete Prepared from Titanium Slag under Different Curing Conditions

Uncovering the role of hydrophobic silica fume (HPS) in rheology, hydration, and microstructure of ultra-high-performance concrete (UHPC)

Preparation and Characterization of Novel Polytitanium Tetrachloride Coagulant for Water Purification

Novel polyferric titanium silicate/chitosan composite flocculant for organic polymeric pollutant removal: optimization, performance and mechanism

Preparation of water-quenched manganese slag and fly ash ultrafine mineral admixture and its application in UHPC

Titanium tetrachloride for silver nanoparticle-humic acid composite contaminant removal in coagulation-ultrafiltration hybrid process: floc property and membrane fouling

The Dispersion and Hydration Improvement of Silica Fume in UHPC by Carboxylic Agents

Coagulation Performance and Floc Characteristics of Poly-Ferric-titanium-silicate-chloride in Coking Wastewater Treatment

An innovative exploration to identify and isolate the dominant-flocculated-species from polytitanium chloride synthesized by electrodialysis

Photocatalytic concrete paving block reinforced by TiO2 nanotubes for NO removal